How do I do a total res

I bought a new Ipad 2 and want to reset my original Ipad for someone else...how do I do this

Restore it to factory settings. See:
http://support.apple.com/kb/HT1414
Regards.

Similar Messages

How can I find the total number of songs in my iTunes library?

I just downloaded the new itunes. In the previous itune library at the bottom of the screen it told me how many songs I have total. Not just purchased, but how many total songs were in my library. I liked knowing this because I could verify my ipod was synced up properly. Sometimes a song wouldn't download from my computer to my ipod, and by knowing how many songs were in the library, it was a double check.
This song count is gone now with this new itune version. There no bar at the bottom of my screen that shows me song count and I've gone through all the settings and can't figure out how to know this without manually counting the songs. Any help is appreciated.

Dear,
In the top menu, you can choose 'view', and subsequently 'show status bar'. This shows the information on the bottom of the window.
kindest regards,

How can I see the total number of books (size of library) on iBooks on my iMac and IPad Mini?

I have installed iBooks on both my iMac (main library) as well as on my iPad Mini Retina. I can't seem to find where to see the total number of books in each library? Can anyone enlighten me please? I can see the covers, lists etc. but nowhere how many books I have total in each library (Total: X number of books stored) or something like that. Can someone point me where this information is viewable?

Did you have 'find my iPhone' activated on it? Because if you go to iCloud.com you can log in there and you can remotely lock or wipe your device. From what I hear, the police won't do anything about going and fetching stolen iPads and iPhones, but if you have find my iphone/ipad/ipod/mac turned on then it will give you a map of where it is.
Just keep in mind that sometimes iTunes does ask you for your password regardless, and only a few weeks ago apple brought in security questions, so everyone had to fill in security questions for their iTunes account to make it more secure If all else fails, ring Apple cusomer support and they might be able to bar your account or something, however you may have to make a new account (the might be able to set it up so you have all your previous information on a new account)
Hope this helps!

How do I calculate the total size of selected folders?

Hello
My question is:
How do I calculate the total size of selected folders?
Thank you

It does show the aggregate size.
Command-Option-I opens the Inspector window. (Or open the File menu and hold the Option key. Get Info turns into Show Inspector.) The Inspector is similar to the Get Info window but it shows aggregate info for multiple selections. It is also dynamic — if you change the selection while the Inspector is open, the info changes to reflect the current selection.

How can I create a high res image gallery, need to have print res photos for a pressroom section.

How can I create a high res image gallery, need to have print res photos for a pressroom section.

If you want Muse to "pass through" your images and not adjust, compress, crop etc - you need to place your images in the lightbox EXACTLY at the right size, pre-cropped and prepped in Photoshop.
So if your light box is 800x600 the image you're dropping into that must be 800x600 exactly with no effects, rotation etc added to the lightbox frame. This stop Muse fiddling with your images, if they are perfect when inserted and you're not asking Muse to crop, expand, add effects etc. If it's perfect when inserted, Muse SHOULD also leave the resolution alone too, but I have not tried that one, but in theory, it should work.

How to print page no/total pges in report programing?

how to print page no/total pges in report programing?

Hi
This is an example:
In TOP-OF-PAGE you can write:
WRITE: SY-PAGNO, '/', '-----'.
When the program has finished to print all data, run a routine like this:
Declare a variable
DATA: L_PAGE_COUNT(5) TYPE C,
      V_LINE TYPE I. "The line where page number is written
* In my example I suppose the page number is always
* written in the first row of the page.
V_LINE = 1.
* Copy this code to the end of program
* Page count will be printed on each page here
WRITE sy-pagno TO l_page_count LEFT-JUSTIFIED.
DO sy-pagno TIMES.
    READ LINE V_LINE OF PAGE sy-index.
    REPLACE '-----' WITH l_page_count INTO sy-lisel.
    MODIFY CURRENT LINE.
    ADD 1 TO sy-index.
ENDDO.
Max

How to get the Grand Total in Module pool Screen

Hi Frds.
     How to get the Grand Total in Module pool Screen
Example i have 10 different materials
for each matarial has different moving . But in my case matarials is doesnt matter here
10 material Moving Average price to do Frand total and display in one column...
Please Help me out Frds.
Regards,
Kabil

Hi
You need to calculate the total in a module of PAI (or PBO) event:
PROCESS PAI.
   LOOP.....
   ENDLOOP.
MODULE CALCULATE_TOTAL.
MODULE CALCULATE_TOTAL.
    GRAND_TOTAL = 0.
     LOOP AT ITAB,
        GRAND_TOTAL = GRAND_TOTAL + ITAB-PWB.
    ENDLOOP.
ENDMODULE.
In this way the grand total will be calculated as soon as the user presses enter or another command.
You can't insert the calculation in the loop of table control, because this loop runs the visible lines only, so it's better to calculate the total out of those loop,

How to find out the total, subtotal in alv report

hi dears,
how to find out the total, subtotal in alv report?
pls tell me logic ,
i will be waiting for eply
regards
eswar

Hi,
<b>ALV Grid List with sub-totals</b>
REPORT z_demo_alv_sort.
* This program lists orders (VBAK) with sort and sub-total for        *
* 'sold-to-party' (KUNNR) and 'Sales organization' (VKORG)            *
TABLES : vbak.
TYPE-POOLS: slis.                      " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg,              " Sales organization
s_kunnr FOR vbak-kunnr,              " Sold-to party
s_vbeln FOR vbak-vbeln.              " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
    vkorg LIKE vbak-vkorg,             " Sales organization
    kunnr LIKE vbak-kunnr,             " Sold-to party
    vbeln LIKE vbak-vbeln,             " Sales document
    netwr LIKE vbak-netwr,             " Net Value of the Sales Order
    waerk LIKE vbak-waerk,             " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
*      Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
           FROM vbak
             UP TO p_max ROWS
          WHERE kunnr IN s_kunnr
            AND vbeln IN s_vbeln
            AND vkorg IN s_vkorg.
ENDFORM.                               " F_READ_DATA
*      Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
    add 1 to ls_fieldcat-col_pos.
    ls_fieldcat-fieldname   = &1.
    ls_fieldcat-ref_tabname = 'VBAK'.
    ls_fieldcat-do_sum      = &2.
    ls_fieldcat-cfieldname = &3.
    append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
    add 1 to ls_sort-spos.
    ls_sort-fieldname = &1.
    ls_sort-up        = 'X'.
    ls_sort-subtot    = &2.
    append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
    ls_fieldcat TYPE slis_fieldcat_alv,
    lt_fieldcat TYPE slis_t_fieldcat_alv,
    lt_sort     TYPE slis_t_sortinfo_alv,
    ls_sort     TYPE slis_sortinfo_alv,
    ls_layout   TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'.                  " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'.                  " Sort by kunnr and subtotal
m_sort 'VBELN' ''.                   " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            is_layout   = ls_layout
            it_fieldcat = lt_fieldcat
            it_sort     = lt_sort
       TABLES
            t_outtab    = gt_vbak.
ENDFORM.                               " F_DISPLAY_DATA
***************** END OF PROGRAM Z_DEMO_ALV_SORT **********************
Regards
Sudheer

How do I see the total # of songs in my library in the lastest version of Itunes

How do I see the total # of songs in my library in the lastest version of Itunes.

click the view bar and then click view status bar.

How can i find out total no of sunday in the year

Hi Experts,
how can i find out total no of sunday's in the particular year. please can any one help how can i do that
Regards,
Arun

Just for fun (and in case this wasn't done to death in the other thread), the rule posted here states:
Most years have 365 days, but a leap year has 366 days. That adds up to 52 weeks (where each week is exactly 7 days) PLUS 1 or 2 additional days. The year 2012 has exactly 366 days.Now if the year starts on a Sunday in a non-leap year, you end up with 53 Sundays. Or if either of the first two days lands on a Sunday during a leap year, then you can also get 53 Sundays.>
which allows a calculation like this:
with test_data as
     ( select rownum + 1999 as test_year from dual
       connect by rownum <= 15 )
select test_year
     , case
          when first_day = 'SUN'
          or ( first_day = 'SAT' and leap_year = 'Y' )
             then 53
          else 52
       end as sundays
from   ( select test_year
              , to_char(to_date(d.test_year||'-01-01','YYYY-MM-DD'),'DY', 'NLS_DATE_LANGUAGE=ENGLISH') first_day
              , case extract(day from last_day(to_date(d.test_year||'-02','YYYY-MM'))) when 29 then 'Y' else 'N' end as leap_year
         from   test_data d );
TEST_YEAR    SUNDAYS
      2000         53
      2001         52
      2002         52
      2003         52
      2004         52
      2005         52
      2006         53
      2007         52
      2008         52
      2009         52
      2010         52
      2011         52
      2012         53
      2013         52
      2014         52
15 rows selected.

How to get the group totals in report

HI,
Iam generating a report to display Storage Location, and Unit of Measures and Material group and also group totals.
how to display the group totals on the report.
thank q
rushi.

Hi,
This following report clearly explains how to display the subtotal and grand total of
the particular field in alv.
REPORT YMS_ALVSUBTOTAL.
*REPORT z_alv_sub_totals .
TYPE-POOLS: slis.
DATA: BEGIN OF it_output OCCURS 0,
          var1(8) TYPE n,
          var2(10),
          var3 TYPE I,
      END OF it_output.
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
       t_fieldcat TYPE slis_fieldcat_alv,
      it_sort TYPE slis_t_sortinfo_alv,
      t_sort TYPE slis_sortinfo_alv,
      v_repid LIKE sy-repid.
INITIALIZATION.
v_repid = sy-repid.
START-OF-SELECTION.
PERFORM get_data.
PERFORM sort_fields.
PERFORM fill_fieldcat.
PERFORM list_display.
*&      Form GET_DATA
      text
--> p1        text
<-- p2        text
FORM get_data.
it_output-var1 = 1000.
it_output-var2 = 'anupama'.
it_output-var3 = '10000'.
it_output-key = 'X'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 1000.
it_output-var2 = 'siddhu'.
it_output-var3 = '20000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 1000.
it_output-var2 = 'chinni'.
it_output-var3 = '100000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 2000.
it_output-var2 = 'chicchu'.
it_output-var3 = '10000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 2000.
it_output-var2 = 'candy'.
it_output-var3 = '10000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 1000.
it_output-var2 = 'anupama'.
it_output-var3 = '10000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 4000.
it_output-var2 = 'anupama'.
it_output-var3 = '10000'.
APPEND it_output.
CLEAR it_output.
ENDFORM.                    " GET_DATA
*&      Form fill_fieldcat
      text
--> p1        text
<-- p2        text
FORM fill_fieldcat.
PERFORM fill_fields USING: 'IT_OUTPUT' 'VAR1' 'Variable 1' ' ',
                             'IT_OUTPUT' 'VAR2' 'Variable 2' ' ',
                             'IT_OUTPUT' 'VAR3' 'Variable 3' 'X'.
ENDFORM.                    " fill_fieldcat
*&      Form fill_fields
      text
     -->P_0146   text
     -->P_0147   text
     -->P_0148   text
     -->P_0149   text
FORM fill_fields USING    value(tabname) TYPE slis_tabname
                          value(fieldname) TYPE slis_fieldname
                          value(seltext_m) LIKE dd03p-scrtext_m
                          value(do_sum) TYPE c.
t_fieldcat-tabname = tabname.
t_fieldcat-fieldname = fieldname.
t_fieldcat-seltext_m = seltext_m.
IF do_sum = 'X'.
    t_fieldcat-datatype = 'CURR'.
ENDIF.
t_fieldcat-do_sum = do_sum.
APPEND t_fieldcat TO it_fieldcat.
CLEAR t_fieldcat.
ENDFORM.                    " fill_fields
*&      Form list_display
      text
--> p1        text
<-- p2        text
FORM list_display.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
     i_callback_program             = v_repid
     it_fieldcat                    = it_fieldcat
     it_sort                        = it_sort[]
   TABLES
      t_outtab                       = it_output
   EXCEPTIONS
     program_error                  = 1
     OTHERS                         = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " list_display
*&      Form sort_fields
      text
--> p1        text
<-- p2        text
FORM sort_fields.
t_sort-fieldname = 'VAR1'.
t_sort-tabname = 'IT_OUTPUT'.
t_sort-spos = 1.
t_sort-up = 'X'.
t_sort-subtot = 'X'.
APPEND t_sort TO it_sort.
CLEAR t_sort.
t_sort-fieldname = 'VAR3'.
t_sort-tabname = 'IT_OUTPUT'.
t_sort-spos = 2.
t_sort-up = 'X'.
APPEND t_sort TO it_sort.
CLEAR t_sort.
ENDFORM.                    " sort_fields
Thanks,
Sankar M

How do you filt the "total" in Visual Composer?

Hi everyone :
My method is to filt the string "total" of the value of the filed .It can work ,but i think it's indirect ,so how do you filt the total in Visual Composer?
thx
chan

Hi Zegion,
Some help links for visual composer,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c6b2d590-0201-0010-42ba-a53a5d422310
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7d48d999-0701-0010-5790-8b2c5ae7107d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1752b737-0401-0010-0ba3-87c3eda8c6ce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cab252d4-0a01-0010-3984-ee345859dde6
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01c5d690-0201-0010-668a-b8d97d51a566
for How to Guides - Visual Composer.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86e
Regards
Prakash

How do I print the total number of pages in report, like Page 1 of 5?

Hi
How do I print the total number of pages in report, like Page 1 of 5?
thanks,
kiran.M

Hi,
Check for the below code:
*Declare a variable
DATA L_PAGE_COUNT(5) TYPE C.
*Copy this code to the end of program
*Page count will be printed on each page here
WRITE SY-PAGNO TO L_PAGE_COUNT LEFT-JUSTIFIED.
DO SY-PAGNO TIMES.
READ LINE 1 OF PAGE SY-INDEX.
REPLACE '-----' WITH L_PAGE_COUNT INTO SY-LISEL.
MODIFY CURRENT LINE.
ENDDO.
TOP-OF-PAGE.
WRITE: /(70) 'Heading' CENTERED, 70 SY-PAGNO,'of ', '-----'.
You will find your solution in below thread with code:
Total Pages in Basic List
Rgds,
Shakuntala

How to calculate forign currency total amount in sale order???

how to convert forign currency total amount in indian rupees on sale order pld ???
Edited by: VINAYAK CHA on Feb 21, 2012 1:30 PM

Dea Srujal
SELECT T0.[Docdate],T1.[ItemCode],T1.[U_jobno]As 'Job Card No',T1.[Quantity],T0.[CardCode],T2.[U_SP],T2.[U_MA],T2.[U_ID], T2.[U_OD],T2.[U_testfield],T0.[Docduedate]
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OHEM T3 ON T0.OwnerCode = T3.empID
WHERE T1.[U_INRPRICE]>='35,000' And (T0.[Docdate]>='[%0]' and T0.[Docdate]<='[%1]' )and T1.[ItemCode]!='SEAL' AND T0.[DocStatus]='O'
iam using above query with above formatted search as i post in previous answer.
but still some item is missing in query
kindly do the needful

How do I find the total number of elements in a multi dim array

How do I find the total number of elements in a single or multi dim array?
For example, a 2x3 array has 6 elements, and a 2x3x4 has 24. How do I compute this very easily - is there a single VI that does this?
David
Solved!
Go to Solution.

Use "array size" (array palette) followed by "multiply array elements" (numeric palette)
(Works also equally well for 3D arrays and higher)
For a 1D array, just use "array size".
Message Edited by altenbach on 02-05-2009 05:57 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
NumberOfElements.png ‏3 KB

How do I do a total res

Similar Messages

Maybe you are looking for