How do I do this. Users without FormsCentral accounts or accounts with unverified email addresses cannot receive email notifications. No notifications will be sent until the accounts are created and verified.

How do I do this. Users without FormsCentral accounts or accounts with unverified email addresses cannot receive email notifications. No notifications will be sent until the accounts are created and verified.

Moving this discussion to the FormsCentral forum.

Similar Messages

  • I have a Power MAC G5 dual 2ghz that has a peculiar problem.  The monitor will not report until the machine is stopped and started 5 or 6 times.  Once booted it will restart without problem if done so from the apple menu.  Swapped out all hardware

    My Power MAC G5 has a peculiar problem.  The monitor fails to report until the machine is started and shut down 5 or 6 times.  Once it has booted it can be restarted without incident from the Apple menu.  I have swapped out all of the hardware.  Monitor, Memmory,Video Card and reset the PRAM.  After resetting the PRAM it booted on the first attempt and I thought it was solved.  But the next day it was back to starting and stopping until the Monitor came on.  Does anyone have a suggestion?  Thanks

    It could be a bad PRAM battery corrupting your PRAM.  Typically when I have monitor issues on startup it is a bad PRAM battery.
    Texas Mac Man's PRAM, battery, PMU tutorial - https://sites.google.com/site/macpram/mac-pram-nvram-cuda-pmu-battery-tutorial
    Apple's PRAM reset directions - http://docs.info.apple.com/article.html?artnum=2238
    If you have a digital multimeter you can check the condition of your present battery.  It should read at least 3.2V if it is the 3.6V half-AA battery type.  A new battery provides 3.67 Volts DC. A bad battery provides under 3.2 Volts DC.  Ideally this should be measured while the battery is under load; added recommendation from Hans777:
    >I have recently found out that an exhausted battery will still indicate >3.6 V with a high internal resistance VM.
    >
    >Checking incircuit: powercord disconnected press PMU reset button for >about 5 sec before measuring.
    >
    >Checking outside: load the battery with a 1500 Ohm resistor when measuring.
    Alternatively, test the battery while it is still in the computer.
    If the battery is more than 5 years old, especially if you totally disconnect the computer from the power regularly, or have left it unplugged for several months at one time, it is likely the battery is dead.
    Sometimes you have to do a more intensive reset of hardware management:
    [Resetting Cuda/PMU on Power Mac G5, Power Mac G4, Power Macintosh G3|http://support.apple.com/kb/HT1939]
    [How to reset the SMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005)|http://support.apple.com/kb/HT1436]
    [iMac G5: How to Reset the SMU|http://support.apple.com/kb/HT1767]

  • How get email address from received email?

    In the old days, like 6 months ago, I could depend on being able to salvage an intended recipient's email address from a note they sent to me. Just click on the name in a received email, then open a "new" email under that address, bang out the message, and send it. Not any more. How do I do it? This seems like a really stupid change. Why does it require complication?

    There are several ways. First is to double click the message and the message should appear on-screen with the complete address. Next is you will see a small down arrow like in my example below, click it and you will get the info you need.

  • How to enable SAP* this user again ?

    Dear Experts,
    We are losing SAP*'s password in our sap4.7 system . and then we update the table record by following sql command :
    update sapxxx.usr02 set bname = 'SAPBK' where mandt = 000 and bname = 'SAP' ;
    commit ;
    Of course , we changed the sap* password to 'PASS' sucessfully . But when we update the record again , we found that the SAP*'s password still being 'PASS' whatever we try to use 'SU01' to reset or update the sqlcommand again and again ....
    Has someone can tell me how to restore SAP* this user to 'normal' status ? Many thanks ....
    Best Regards,
    Carlos Zhang

    Hi!
    Delete SAP* from usr02 table
    delete from sapxxx.usr02 where mandt = 000 and bname = 'SAP*' ;
              commit ;
         2. Go to T code SU01 in 000 client and create user SAP* and make it copy of user DDIC.
      Regards,
    Vaibhav

  • Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

    Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

    I misunderstood what Time Capsule is and had hoped for a wireless backup device that didn't have to be connected to the router.
    The TC is a wireless backup device.. it does not need to be connected to the main router..
    The problem is the computer.. not the TC.. the computer has only one wireless card.. if your current internet is by wireless.. then you must choose.. internet or backup.
    But my other suggestion will work.. get a wireless USB stick compatible with Mac OS.. there are plenty and cheap.. since you are in the same room as the TC they will work fine.. plug it in and load the driver.. taint hard.
    You should do the first backup by ethernet though.. wireless is too slow.. once you have that, you will do fine.
    Search ebay for wireless n usb.. Mac compatible..
    http://www.ebay.com/itm/New-EDUP-Mini-Wireless-11N-300M-USB-LAN-Card-WiFi-Adapte r-Nano-Card-Soft-AP-/150864362939?pt=US_USB_Wi_Fi_Adapters_Dongles&hash=item2320 377dbb#ht_3553wt_1165
    As you can see.. they are getting smaller and neater.
    I have no idea if it works .. haven't tried one.. but I have used USB wireless stick on the Mac to overcome this issue.
    You will need to set static IP .. not hard but you need to set specifics if you do buy one post again for the setup.

  • I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.

    I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.

    I don't see an issue, but if you mean why didn't you get most of your memory back you need to see what else is using storage. Go to Settings/General/Usage. Wait a bit for it to calculate storage allocation, then when it finishes you can see how much storage each app uses.

  • In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?

    In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?
    Thank you!

    When you erased the disk did you select Mac OS Extended Journaled as the format option?

  • When trying to log in with my primary Apple ID and password, I am continuously asked for my pass word without being able to log in. How can I solve this issue, without creating a new Apple ID?

    When trying to log in with my primary Apple ID and password, I am continuously asked for my pass word without being able to log in. How can I solve this issue, without creating a new Apple ID?

    Chewning wrote:
    I saved some of my music to a Cloud I can't access. Now, they show up as "Purchased" in iTunes, and I'm not given the option of re-downloading OR repurchasing them.
    Music purchased from the iTunes store is not stored in your personal iCloud account, and an iCloud account is not required to redownload them.  You should be able to redownload them as explained here: http://support.apple.com/kb/ht2519.  If you are unable to, contact iTunes store support for assistance by going to https://expresslane.apple.com ; click ‘iTunes', and then 'iTunes Store', then 'Purchases, Billing & Redemption'.

  • HT1420 I just bought my cousin's ipod, and I want to update it on my computer.  However, it needs authorization from his account to keep all the apps, and he's already authorized it on 5 computers.  How can I update this ipod without losing all the apps?

    I just bought my cousin's ipod, and I want to update it on my computer.  However, it needs authorization from his account to keep all the apps, and he's already authorized it on 5 computers.  How can I update this ipod without losing all the apps?

    You cannot use someone else's apps without violating the license agreement. The apps are tied to the owner (via Apple ID). The right thing to do would be to update and start fresh.

  • How can you search this forum without searching all the other forums

    how can you search this forum without searching all the other forums at the same time which is a big fat waste of time.

    Follow this tip to create a bookmark to a search page that searches only the forum you want or...
    Browse with Firefox and enable this Greasemonkey script, which forces all searches from a sub-forum to be local.

  • I just switched from a blackberry to a new iPhone 5 S - I would love to be able to add my address book to the new iPhone.  How do I do this easily without having to manually add each no.?

    I just switched from a blackberry to a new iPhone 5 S - I would love to be able to add my address book to the new iPhone.  How do I do this easily without having to manually add each no.

    Unless your carrier doesn't have the required SIM card size, you can get a new SIM card from your carrier. There is usually no charge for this.
    If you don't have an Apple iCloud account or if you do being accessed on the iPhone with contacts turned off for over the air syncing, you should be able to transfer contacts from the Address Book app on your Mac via the iTunes sync process. This is selected under the Info tab for your iPhone sync preferences with iTunes followed by a sync.
    If you have an iCloud account, you can sync contacts over the air with the Address Book on your Mac. After confirming your contacts are available with your iCloud online address book - checked by logging in with your iCloud account using a browser on your Mac, you can then turn Contacts on for over the air syncing with your iCloud account settings on your iPhone and your contacts will then be available there and kept synced automatically over the air between your iPhone address book, your iCloud online address book, and the Address Book on your Mac without having to sync with iTunes for this.

  • Just got a mac air and started using it. after getting it set up i migrated files from my old pc.  i did not realize that the files migrated to a different user account.  how do i delete this user account and not lose the migrated files which i need

    I just got a mac air and set it up and started using. after getting famiiar with it i migrated my files from my old pc. i did not realise that the files migrated to a new user account.  how do i delete this user account but not lose the migrated files?

    Mac 101: File Sharing
    Mac OS X 10.7 Help: Transfer files between two Mac computers
    Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
    Mac OS X 10.7 Help: Use iDisk to share files
    Mac OS X: Sharing your files with non-Apple computers
    How to share a Mac's files with a PC and vice versa.

  • I have apps that needs to be updated that shows my old account. How do I delete this info without losing my purchases? The old account was hacked and I do not want to update anything using that account! Help. Wonderer

    I have apps that needs to be updated that shows my old account. How do I delete this info without losing my purchases?

    iTunes purchases cannot be transferred between accounts. If you no longer wish to use the old account at all, you should delete those apps and repurchase them with the new account.
    On the other hand, you could also (and should have before creating a new account - contact iTunes support to deal with account security: https://getsupport.apple.com/Issues.action

  • I clearing space on hard drive,wheel deleted.I'm told it's important,how do I return this user  called 'wheel',on hard drive.On my MacBook air 11(Late).

    HELP! In attempt clearing space on hard drive,user called 'wheel' got deleted.I'm told it's important,how do I return this user  called 'wheel',on hard drive.On my MacBook air 11(Late).

    Back up all data.
    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

  • I've recently added the MacAir to my Microsoft /Windows network. The Mac sees my printers but all the printers are "paused" and I cannot print, even if directly attached. How do I fix this?

    I've recently added the MacAir to my Microsoft /Windows network. The Mac sees my printers but all the printers are "paused" and I cannot print, even if directly attached. How do I fix this?

    Yes, I've that and it didn't work. Today, I reinstalled printer software on one printer and the "paused" message changed to "offline". It's a three-in-one printer. I turned off and on again and it still says "offline"
    "

Maybe you are looking for

  • My itunes won't open in windows 2000

    I just got my first ipod its a 2nd generation nano, I went to support to learn what all i neded to do to get music on it. Apple support told me to dl the latest version of itunes so i did that. After I installed it, I went to the icon and clicked it

  • Share the view wtih GAF and HTML

    Hello All, I have Benefits enrollement application to be designed such that the screen is shared with GAF and a HTML. The HTML is a page designed and will remain the same through out all the steps in GAF. Please look at the picture attached. The left

  • Acrobat install issue

    I am running newly installed Mavericks OS and Acrobat seems to be installed okay, but when I launch it, I get "Adobe Software License Agreement" that I can't "Accept"!

  • Firefox wil not open a new tab neigther with + or Ctrl +T

    Firefox wil not open (manualy) a new tab anymore. Not with the + on the site tab nor with Bestand - new tab or Ctrl+T

  • Installing Oracle AS R2 (10.1.2.0) on RHES 4.0

    To run the Installer is necessary modifier the file /etc/redhat-release Red Hat Enterprise Linux ES release 4 (Nahant) to Red Hat Enterprise Linux ES release 3 (Nahant) and don't care inclusive mantain the other words, because if OUI finds e.g. digit