How do I double underline a cell in Numbers
Ummm, the heading is pretty much my question.
The only way(s) I can think of are:
- underline the text in the cell with a double underline. You can open the text panel by using the menu item "format > Font > Show Fonts":
- make a narrow row below the row rou want to have a double underline and format so the top and bottom borders are a solid line:
Similar Messages
-
How do you double underline in pages 5.0?
how do you double underline in pages 5.0?
You can't as far as I can tell. You might want to read this.
-
HT202879 How can I double underline in Pages 5?
Hi,
How can I double underline in Pages 5? I can see the options for strikethrough, underline etc but not double underline.Menu > Format > Fonts > Show Fonts.
-
Hello, I would like to know how to add or delete single cell in numbers.
Hello, I would like to know how to add or delete single cell in numbers.
If by delete you really mean clear the contents of a cell, then just click once on the cell and hit the 'delete' button.
Before:
After hitting delete button:
In some circumstances you can actually delete one cell.
For example here, I make this choice:
Resulting in this:
So it's not strictly true that Numbers does not delete one cell, ever. It can if you have a one-column table.
So never say never or not ever! Enough pedantry for today!
SG -
How do you double underline in pages 5.2
I am not able to find how to double underline in the pages update 5.2 Making documents previously I was able to select a colour for text then single or double underline in a different colour. It seems now that there is only the option of text and single underline in the same colour. I've been producing Primary Student Workbooks for approx. 5 years and these are "key" tools the student uses. Continuity in creating additional books is very important.
Same place:
Menu > Format > Font > Show Fonts > T > select Double/Color
Peter -
How do you double underline in Pages 5.02?
I cannot seem to find the double underline function in the new version of Pages. Does anyone know how to do it or where to find it? Did it go away with this new version?
It is in the Fonts panel.
Menu > Format > Font > Show Fonts or command t
First icon on the Toolbar T.
Peter -
How to remove all columns and cells in numbers
how to remove all columns and cells in numbers
Click on the Table's icon in the Sheets list. Press delete.
Done.
Regards,
Barry -
How to replace text in selected cells in Numbers 3?
I want to replace a few words in Numbers 3, but I can't find where I can limit the replacement within chosen cells.
In previous version, there was a drop down list I can choose to limit the replacement to chosen cells or current sheet.
But now when I use replace all, it will replace all words in all sheets.
Anyone knows how to do it?
Thanks!
AllanThe Find Replace in Selection Automator Service (Dropbox download) can do what you want.
To install, double-click the .workflow package and, if necessary, click 'Open Anyway' in System Preferences > Security & Privacy.
To use, make your selection in a table, then choose Find Replace in Selection from the Numbers > Services menu.
SG -
How do I name a specific cell in Numbers 3.2.2?
I am working with a multi-table spreadsheet and I want to create a table of variables that are used in a specific formula throughout the spreadsheet. For example, here is the formula I'm working on:
=IF(C32≥321,"23",IF(C32≥281,"19",IF(C32≥241,"17",IF(C32≥201,"15",IF(C32≥161,"13" ,IF(C32≥121,"11",IF(C32≥80,"09","")))))))
Yes, all you database builders out there, it's a wacky way to spreadsheetize an IF, THEN, OR statement - fortunately, I'm only working with numbers. What I want to do is replace the cell values and the "then" result numbers with references from another table. I can't just link to the specific cell by clicking (resulting in something like "<table>::<cell>") because the formula builder spits it out claiming there are too many arguments. Here is an example of what I'm getting at if you replace the first number in each statement with a cell name like "R_1" and the calculated displayed value as "V_1":
=IF(C32≥R_1,"V_1",IF(C32≥R_2,"V_2",IF(C32≥R_3,"V_#",IF(C32≥R_4,"V_4",IF(C32≥R_5, "V_5",IF(C32≥R_6,"V_6",IF(C32≥R_7,"V_7","")))))))
Right now, I have to manually make changes to the formula in one cell then copy it across the other cells in the different tables. I'd much rather have the formula reference specific cells in a variable table so that I can update the values globally. In the "help" for Numbers, it states:
"If the reference is to a cell in another table, the reference must contain the name of the table (unless the cell name is unique within all tables). For example:
=Table 2::B2
Note that the table name and cell reference are separated by a double colon (::). The name of the table is automatically included when you select a cell in another table while building a formula.
If the reference is to a cell in a table in another sheet, the sheet name must also be included (unless the cell name is unique within all the sheets)." (emphasis mine)
However, I can't find any documentation to instruct me on how to create a unique cell name. Any advice?Hi coop,
coop1108 wrote:
IF, THEN, OR
I think of the IF function as IF(this is true, THEN do this, ELSE do that)
From the Function Browser: type = in any cell, then type 'if' (no quotes) in the search box.
The IF function returns one of two values, depending on whether a specified expression evaluates to a boolean value of TRUE or FALSE.
IF(if-expression, if-true, if-false)
if-expression: A logical expression. if-expression can contain anything as long as the expression can be evaluated as a boolean value. If the expression evaluates to a number, 0 is considered to be FALSE, and any other number is considered to be TRUE.
if-true: The value returned if if-expression is TRUE. if-true can containany value. If if-true is omitted (there’s a comma, but no value) and if-expressionevaluates to TRUE, IF will return 0.
if-false: An optional argument specifying the value returned if if-expression is FALSE. if-false can contain any value. If if-false is omitted (there’s a comma, but no value) and if-expressionevaluates to FALSE, IF will return 0. If if-false is entirely omitted (there’s no comma after if-true) and if-expressionevaluates to FALSE, IF will return FALSE.
Or more to the point,
IF it is sunny, THEN have a picnic, ELSE stay in bed.
Call back with further questions. Maybe a LOOKUP function will work for you.
Regards,
Ian. -
How to update popup (drop down) cells in Numbers using Applescript
I understand that the list popups (dropdown lists in cells) cannot be dynamic in Numbers.
I have the same dropdown list in multiple cells and tables, and this list often needs to be changed. Its not practical to amend one list, then copy/paste it into 200 plus cells that require the dropdown facility (they are not in sequential rows).
Can Applescript be used to do the copy/paste function, as i could specify the cell ranges. My simple attempt only managed to copy/paste the cell values rather than the dropdown/popup list.
Any constructive help would be appreciated.
Thanks.Hi Hiroto,
I have this script running, with one issue.
set tValues to my doThis(1) -- get values of the selection
if tValues is not "" then
activate
display dialog "Select the cells where you want to create the PopUp." & return & "After that, click on the 'OK' button."
my doThis(tValues) -- set the cell format of the new selection to "PopUp Menu" and set the values of the each menu item
tell application "Numbers" to display dialog "Done"
else
tell application "Numbers" to display dialog "You must select the cells in a table before running this script."
end if
on doThis(n)
tell application "Numbers"
set tTables to (tables of sheets of front document whose its selection range isnot missing value)
repeat with t in tTables -- t is a list of tables of a sheet
if contents of t is not {} then -- this list is not empty, it's the selected sheet
set activeTable to (get item 1 of t)
if n = 1 then return value of cells of selection range of activeTable-- return values of the selection
set format of (cells of selection range of activeTable) to pop up menu -- set the format to pop up menu
return my setValuePopUp(n) -- set value of each menu item
end if
end repeat
end tell
return ""
end doThis
on setValuePopUp(L)
tell application "System Events"
tell process "Numbers"
set frontmost to true
delay 0.3
set inspectorWindow to missing value
set tWindows to windows whose subrole is "AXFloatingWindow"
repeat with i in tWindows
if exists radio group 1 of i then
set inspectorWindow to i
exit repeat
end if
end repeat
if inspectorWindow is missing value then
keystroke "i" using {option down, command down} -- Show Inspector
else
perform action "AXRaise" of inspectorWindow -- raise the Inspector window to the front
end if
delay 0.3
tell window 1
click radio button 4 of radio group 1 -- the "cell format" tab
delay 0.3
tell group 2 of group 1
set tTable to table 1 of scroll area 1
set tc to count rows of tTable
set lenL to (count L)
if tc < lenL then -- ** add menu items **
repeat until (count rows of tTable) = lenL
click button 1 -- button [+]
end repeat
keystroke return -- validate the default name of the last menu item
else if tc > lenL then -- ** remove menu items **
repeat while exists row (lenL + 1) of tTable
select row (lenL + 1) of tTable
click button 2 -- button [-]
end repeat
end if
tell tTable to repeat with i from 1 to lenL -- ** change value of each menu item **
set value of text field 1 of row i to item i of L
end repeat
end tell
end tell
end tell
end tell
end setValuePopUp
==============================
When the popup is created, if there is one header row, it adds "1" to the list of popup items, if there are two header rows, it adds "1", "2" to the list of popup items. What should i amend to remove this (i have two header rows in my sheet).
I would ideally like to add a "-" to the list (to represent nothing selected in the cell) as default i.e. top of the list (i could add the symbol to my source data but that would look untidy). At the moment, after running the script all cell values change to 1.
Oh, what would the best way to modify the script so it selects a specific cell range? At the moment i have to first select a column, then run the script, then select the source cells, then click ok on the dialog box before it does the magic.
Someone else will be running the script, and if its easy to change, i would prefer to have an absolute source cell range values so the user can just rund the script without any selection required.
If you can advise on this, that would be most helpful. -
I am trying to do double underline for SQR report, tried double equals its not bold like regular underline and i tried to do
two underline but the spacing between two lines are large here is the code
graphic (+1,40,9) horz-line 10
graphic (+1,40,9) horz-line 10
Do any one know how to do double underline ini SQR or any idea how i can reduce the spacing between lines.
I have another question DO any one know how to give color for the underline ?
ThanksIt was not clear whether you were describing what you wanted or describing what you were able to achieve. There is no double underline cell border in Numbers so I will assume you were using the double underline text format that Jerry described and it was not giving you the result you desired. But, because there is no double underline cell border in Numbers, you won't be able to get the effect you desire by using cell borders. The best I can suggest is to do one of the following:
1) Use a thick single line border (my recommendation)
2) Use a single line border and draw a line (insert/shape/line) across the table to simulate a double line border
3) Forget using borders and draw two lines across your table to simulate the double line border.
Message was edited by: Badunit -
I have both safari and chrome, because I'm used to chrome. The only extension I have is Google docs. I started getting green double underline hyperlinks to ads. How can I get rid of this without adding more junk to the computer? People suggest programs to do it, but how do I know they won't make it worse?
Is someone from Apple here and can answer?
Thanks!You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Some letters in website are double underline and when I move a cursor over these letter, there is a small window popup which contains that letter and "Click here". when I move a cursor over letter Click here, it will redirect web site to another strange website. How can I stop it? Please help
You might find installed along with this:
--- IB Updater Service http://botcrawl.com/how-to-remove-ib-updater/
--- Linksicle Linkside.com
--- TidyNetwork.com
--- RISE Editor RiseToBloom.com
equally abhorent malware.
I have Norton running and it let me install these without the usual warning!
None of them show up as "running" on the windows process list. -
In .pages: How to place a double underline, as for a total in a col. of figures?
In .pages: How to place a double underline, as for a total in a col. of figures?
In the Fonts window click on the underlined "T"
Walt -
As title says.
Normally in Gantt Chart View, above the tasks there's a line which displays the contents of the cell you have selected, and allows you to edit the contents without having to double click the cell.
In my case, this line is not there, and it is slightly hindering my work.
So, does anyone know where I should go to re-enable this line?
Thanks a lot!Hi,
Go to file, then options, then display and check the "entry bar" option.
http://www.manageprojectsonsharepoint.com/blog/2012/04/02/microsoft-project-quick-tip-entry-bar/
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS
Maybe you are looking for
-
My ipod got wet and now it keeps turning on and off.
i got my ipod wet and now it doesn't even have enough power to charge. it just keeps turning on and off
-
Oracle coherence first read/write operation take more time
I'm currently testing with oracle coherence Java and C++ version and from both versions for writing to any local or distributed or near cache first read/write operation take more time compared to next consecutive read/write operation. Is this because
-
As a graphic artist, I need to send proofs to my clients. I start with Illustrator files (which also use some Photoshop bitmaps) and send PDF proofs to clients. However, when I send these proofs, I see now that the client can still pull out my vector
-
How do I get CC to open these files correctly? Is the client saving them incorrectly? My work around has now become a pain & I need to know why Illustrator CC tells me most/all embedded images are missing in files received by clients. Illustrator 5.1
-
I received a message stating Not Enough Storage. This iPad cannot be backed up because there is not enough iCloud storage available. The touch screen will not let me select settings to correct this. I did purchase more storage via my iPhone, but I