How do I download AirPort Utility 1.3.3

I have and iPad running iOS 6.1.3 and I just bought an AirPort Express.
I went to the support page and it has a link to the 1.3.3 version, but clicking
on the link takes me to the ITunes store which has 1.3.4.  How do I get
1.3.3?

It won't run because I have iOS 6.1.3 on my iPad.
I have iOS 6.1.3 on my iPad because Apple stopped supporting
sync and backup with my computer with iOS 7 so upgrading
to iOS 7 is a non-starter.
AirPort 1.3.3 is the version supported on iOS 6.
Apple's support page has a link to AirPort 1.3.3 at
AirPort Utility software and firmware downloads - Apple Support
but it doesn't do what it says, it only points to 1.3.4.
So once again the subject question....

Similar Messages

  • How can I download airport utility for my windows computer?

    I have been unable to find the airport utility to download it. I can not, for some reason, get the download window to load. It just sits there with a spinning wheel in the center of the screen. Where can I find the airport utility for the new airport extreme?
    Thank you for your help.

    The most recent version of AirPort Utility is AirPort Utility 5.5.3 for Windows
    If you are having trouble downloading this, Apple has just introduced a number of new Mac updates, so it is possible that the servers may be temporarily overloaded.

  • I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

    I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

    The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
    Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

  • How can I download airport extreme software on new windows 8 computer?

    How can I download airport express software on new Win8 computer?  keep getting error message saying that I need Win7 or newer.

    AirPort Express needs AirPort Utility 5.6.1 for Windows.
    AirPort Utility 5.6.1 for Windows - Support - Apple
    If that won't run on Windows 8, then you best call Apple Support.....or borrow an iPhone or iPad for a few minutes to set up the Express.

  • How do I access Airport Utility 5.6?

    I can no longer see remote speakers on iTunes so can not play music through airplay - via airport express.  I went to Airport Utility and got a message that said this version of Airport Utility doesn't support this base station.  Use Airport Utility 5.6 to configure or manage this base station. My computer is a MacBook Pro running 10.7.3.

    I have tried downloading airport utility 5.6, but everytime I try the installation fails. I'm running OSX 10.7.5
    ANY IDEAS

  • Trying to update airport express by downloading airport utility 5.6 on my macbook pro/lion.  getting error message "version of OS X  on this volume is not supported"  What does it mean?

    Trying to update airport express by downloading Airport Utility 5.6 (which it says I need).  When installing I get an error message, "...version of Mac OSX on this volume is not supported."  What does it mean/what do I do?

    For OS X Lion, you need to download this version directly from Apple Support Downloads.

  • Need to download airport utility 5.6 on OS X 10.7.5 to work with older base station

    need to download airport utility 5.6 on OS X 10.7.5 to work with older base station & airport extreme but install fails

    I used Pacifist to install AU 5.6 on Mountain Lion. I think it works for Lion also.

  • Where to download airport utility 5.6

    have 10.7.5 system
    need to download airport utility 5.6.  can't find on apple support

    You should find it or 5.6.1 at support.apple.com/downloads.
    Note that Apple no longer supports its use nor permits us to discuss it here. Your best bet is to search Google.

  • HT5022 I've downloaded AirPort Util 5.6, in order to manage my Gen 1 Airport Express. But when I go to mount, it says it can't be installed as version of OSX (latest Mountain Lion) is not supported. Feels like Im back using Windows...

    I've downloaded AirPort Util 5.6, in order to manage my Gen 1 Airport Express - because Airport Util 6.0 won't recognise it.
    But when I go to mount, it says Airport 5.6 it can't be installed as my version of OSX (latest Mountain Lion) is not supported/does not support on 5.6.
    Super unhelpful error messages bringing back memories of using Windows...
    Anyone sussed this, or have Apple just fazed out the original Airport Express hardware on the sly?

    Generation 1 AirPort Express is Model No A1264. Check the side of your Express to look for the model number there.  AirPort Utility in Mountain Lion will configure this model.
    More likely, you have an older "b/g" version of the Express. Apple started the "Generation" thing with "n" capable devices.  The Model number of your device is likely either A1084 or A1088. AirPort Utility in Mountain Lion no longer supports these older "b/g" devices.
    If you have a Mac there running an earlier version of the operating system, you can use that to configure the Express.
    Or, there is is workaround to install AirPort Utility 5,6 for Lion on Mountain Lion. See this article for details:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

  • HT2305 How do I download Airport Extreme for a PC?

    How do I download the AIrport Extreme Utility for a PC on Windows 7?

    Click the link below
    AirPort Utility 5.6.1 for Windows

  • I have an old Airport Express. How do I get Airport Utility to recognise it?

    I have an OLd style Airport Express that I was using with my 2007 iMac and Tiger. Recent upgrade to Mountain Lion.
    How do I get the Airport Utility to recognise it so I can set extra stuff?
    AndrewH66

    Here are the AirPort Utility downloads:
    http://support.apple.com/downloads/#airport
    Bottom line: I don't believe it's possible to use your old AirPort Express with Mountain Lion.  The current AirPort Utility is 6.3.1.
    I'm assuming you have this one (from around 2004):
    http://support.apple.com/kb/SP76
    If instead you have this one (from arount 2008):
    http://support.apple.com/kb/SP1
    ... then AirPort Utility may well support your device.

  • Airport Utility 6.1 is incompatible with older Airport Express. Apple suggests to use Airport Utility 5.6 but it isn't compatible with Lion. How can I use Airport Utility?

    I have an Airport Express 802.11b/g, model nº A1084. Mac OS X 10.7.4. When I run Airport Utility it says that the version (6.1) isn't compatible with the base station and suggests to use the version 5.6. I try to download and install it but a message says that the version of Mac OS is not compatible with this version of Airport Utility. Apple is trying to make me crazy?

    Thank you Bob for the correct link. To be honest I have no idea how you found that. The Airport 6.1 utility gives the message that 5.6 is needed, and the link unhelpfully just goes to the US support home (I am UK for a start…) - and endless navigating eventually gets you to 'other Airport Utility Software' - and there is, the incorrect version for Lion…
    I have managed to setup the Express using the software link you provided :-)
    iteachcoffee - workaround - get someone with Lion on a laptop, or better, Pre-Lion so you don't have to download the special software  (like the wonderful Snow Leopard for example) and set up your Airport with that.
    The Apple answer I'm sure is simply: Get a newer Airport! ;-) (annoying I know, my old one works perfectly!)

  • Download Airport Utility 5.6 Instatllation failure

    I have to use Airport utility 5.6 to configure my base station,when I download 5.6 and try to install it I get:Installation failed The Installer encountered and error that caused the installation to fail Contact software manufacturer for assistance. I am using Lion 10.7.5 with airport utility 6 .3.1 already installed Any ideas have tried several time to re download with no success

    There are plenty of methods of installing 5.6 utility but you must manually do it... here is my method.
    How to load 5.6 into later Lion & ML
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
    Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

  • How do I get airport utility to recognise my wdstorage

    I have a 1TB my book (WD storage) external hard drive - my iMac can see it and access it on the network but I can't figure out how to get it picked up by airport utility to allow me to set up time capsule back up.

    Actually a apple time capsule is a broadband, DSL or Cable, wireless router with a built in hard drive and at least the router and wifi ap sections are configured by the apple airport utility. I don't own one but here is a link to the product.
    http://store.apple.com/us/product/MD033LL/A/time-capsule-3tb
    And a image of the back of it.
    MartinR wrote:
    Since you are asking about a WD external hard drive, I think you meant to ask about Time Machine, not Time Capsule.   Time Machine is backup software that will work with many kinds of drives.  Time Capsule is an Apple hardware product (it's basically an Airport Extreme with an embedded hard drive).
    When you first connected to the WD drive to your Mac (regardless of how connected), you should have been prompted about whether or not you wanted to use the WD drive for Time Machine.  If you didn't get such a message (or if you said NO), open the Time Machine application (in your Applications folder) and after it opens, click Set Up Time Machine.
    If you have multiple Macs on your network, and you want to use the WD drive with more than one Mac, ethernet connection is preferable.

  • Don't dowload airport utility 6.0 if your network is using old tethered airport expresses.   Download   Airport Utility 5.6 instead

    Watch  out for the new airport utility software update 6.0 if your   airport express has  any old hardware on it . It will no longer be supported .  Plus it requires Lion  to  work ( Lion is not expensive to buy /download from App Store.)   Good news though is that  Apple has created   5. 6   that can be downloaded  and will still allow you to tether (via  ethernet cables) old  airport express  units.

    Watch  out for the new airport utility software update 6.0 if your   airport express has  any old hardware on it . It will no longer be supported .  Plus it requires Lion  to  work ( Lion is not expensive to buy /download from App Store.)   Good news though is that  Apple has created   5. 6   that can be downloaded  and will still allow you to tether (via  ethernet cables) old  airport express  units.

Maybe you are looking for

  • Report to ftp to directory

    hi guys, existing i have a report, which with the output, of sending the data into text file through email to the user when execute. but now, i am requested, to have a new code, to allow to send the text file, ftp to a server directory location, for

  • ORA-01722 error, when doing a WHERE numcol IN (:P2_LIST_OF_NUMS) statement

    Hi, I'm trying to create a flash pie chart in APEX 3.0 and hit problems which seems to come down to my where clause. It appears that the :P2_LIST_OF_NUMS is not being converted correctly when I have more than one comma separated value in P2_LIST_OF_N

  • Number lock in Bluetooth keyboard

    Hi I am using a mac mini with OS X 10.4 with a Bluetooth keyboard and mouse. Both the devices are well paired to Mac mini. But ever since I bought it I wasn't able to use the number pad in the keyboard for numbers. I have tried all the help options b

  • Mapping in jsp

    hi buddies... i have a requirement.. need to import a file... display its fields on jsp against field values fetched from db.. user will map the fields of file and db... n then records will be transferred from file to db... can anyone help as to how

  • Speed Grade Crash, not fixable be reinstall

    Speedgrade crashes after openining. Asking, if i would like to restore the windows after crash. First crash caused be direct link. Deinstall and Install didn't fix the problem, what can i do? Process:         sgmacosx [1342] Path:            /Applica