How do i download utility 5.6, how do i download utility 5.6
how do i download 5.6
AirPort Utility 5.6.1 for Leopard/Snow Leopard
AirPort Utility 5.6 for Mac OS X Lion
AirPort Utility 5.6.1 for Windows
Take your pick.
Similar Messages
-
How do I download an app I previously had on an older device, not utilizing my cloud or itunes backup. I want to download the app as new as if I had never had it before. When I go to the app store, it only gives me the option of downloading from the cloud with the cloud icon?
When you download something from the iCloud, it is a brand new licensed copy. Your iCloud account just contains a notation that you have this app. It isn't storing an actual copy of the app from your Mac.
-
I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!
The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network". -
I am having frequent pop-up boxes. It is very annoying. It was suggested that I repair permissions, but when I try, my 2 year old computer. with OSX operating systems has an old desk utility, and I cannot use it. How do I acquire disk utility 10.4.3?
Any reason why you have not updated to the final version 10.4.11 of Tiger?
General advice on updating Tiger:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs here: http://support.apple.com/kb/DL172
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
[b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later). -
How do I download AirPort Utility 1.3.3
I have and iPad running iOS 6.1.3 and I just bought an AirPort Express.
I went to the support page and it has a link to the 1.3.3 version, but clicking
on the link takes me to the ITunes store which has 1.3.4. How do I get
1.3.3?It won't run because I have iOS 6.1.3 on my iPad.
I have iOS 6.1.3 on my iPad because Apple stopped supporting
sync and backup with my computer with iOS 7 so upgrading
to iOS 7 is a non-starter.
AirPort 1.3.3 is the version supported on iOS 6.
Apple's support page has a link to AirPort 1.3.3 at
AirPort Utility software and firmware downloads - Apple Support
but it doesn't do what it says, it only points to 1.3.4.
So once again the subject question.... -
I have windows xp. I 'm trying to download the airPort utility. how can I do this? It is required for AirPort base station right?
Downloading the right file for XP? Check to make sure that you are running XP SP3.
AirPort Utility 5.5.3 for Windows
AirPort Utility is required if you need to set up or change the settings on an Apple AirPort router. It is not required if you are simply connecting to the wireless network from a PC. -
Hi, I have Imac 10.8.5 and Aiport Express 802.11n wi-fi. I need a airport admin utility that I can't download. How do I do? Help me, please!
Welcome to Apple Support Communities
Your iMac comes with AirPort Utility (in /Applications/Utilities). You can open it from the Launchpad by going to the "Utilities" or "Other" folder -
For my new Airport TC I have an error this version of AirPort Utility doesn't support this AirPort wireless device. How do I find and download the latest version of AirPort Utility?
https://itunes.apple.com/us/app/airport-utility/id427276530
AirPort Utility for iOS requires iOS 5 or later.
AirPort Utility 6 requires OS X 10.7.5 or later. -
i recently upgraded to maverick and i lost 2 apps i want back they are network utility and mail how can i get them back or where can i find them to download
Hi megamike1969,
I've been losing some apps also in the Dock. As Niel said I think is that you may be able to just drag them back to the Dock, if you can find them.
What I do is open Launchpad and while you're in there, drag the application to the Dock. If you can't locate the apps, then disregard this post.
gl,
kel -
I have 2 Airport Base stations that I am trying to use to extend my WiFi but I cant get them to work. I downloade Airport Utility to windows 7 and it doesnt recognize any devices. I have them plugged in and they have a solid yellow light. Does anyone know what I need to do to get them to work. Your help would be appreciated.
Thanks for providing the model information.
I would recommend that you start by performing a "factory default" reset on all of your AirPort base stations. Once completed power them all down. While powered-down, temporarily connect both Express base stations to an open LAN port on the Extreme using separate Ethernet cables.
Once connected, power up the Extreme; wait five minutes, and then, power up each of the Express base stations. Which you power-up first doesn't matter.
Now start up the AirPort Utility on the PC. It should now "see" all three base stations. If so, go ahead and configure your extended network.
Please post back your results. -
How to download Apple iPhone configuration utility
I Have a unlock iphone 4S, This phone origin carrier from sprint, I bought it when travel to Netherlands in year 2013.
after return to singapore found this phone need to unlock, I bough unlock SIM card to unlock it. When I upgrade my SIM card found that APN setting missing.
I download iphone configuration utility and solve my problem the previous time. But now I can't find this software any more. Will Apple have latest software or other s for me to solve APN setting.Replaced by Apple Configurator:
https://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12
Your iPhone was not unlocked, but hacked. Any iOS upgrade or restore
will relock it. Contact Sprint to see if you qualify for an unlock. -
How can i download eos utility for air mac
i have canon eos 40d and cant install EOS utility in my air mac .....please help me
The most recent version of AirPort Utility is AirPort Utility 5.5.3 for Windows
If you are having trouble downloading this, Apple has just introduced a number of new Mac updates, so it is possible that the servers may be temporarily overloaded. -
How can I download airport utility for my windows computer?
I have been unable to find the airport utility to download it. I can not, for some reason, get the download window to load. It just sits there with a spinning wheel in the center of the screen. Where can I find the airport utility for the new airport extreme?
Thank you for your help.The most recent version of AirPort Utility is AirPort Utility 5.5.3 for Windows
If you are having trouble downloading this, Apple has just introduced a number of new Mac updates, so it is possible that the servers may be temporarily overloaded. -
I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?
In iTunes prefs>Store - is the Store check box unchecked?
Did you repair pemissions with Disk Utility?
MJ -
How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
Are the files lost forever or can i recover them by going to a shop or using a software?Thank you for responding.
This might sound stupid since i'm not really knowledgeable with Macs,
but since all my files were moved from my mac computer to the external hard drive,
is it possible to recover those files through my Mac - like recovering deleted files?
Maybe you are looking for
-
How to lock panels in fullscreen mode
Hi all This might be a silly question, but since I converted from CS3 on Windows to CS5 on Mac I´ve been unable to do the following with the layout: I want the panels to be locked to the main window in full screen mode, so that when I open and work w
-
I've been using CFEclipse for years, looking at CF Builder as an alternative. I installed the trial, been using it for a couple of days and like it so far, but I can't figure out (and I spent way to much time trying) how to get the CFML toolbar to sh
-
Hi All: What is the Cluster ID in JMS adapter? I chose QoS = EOIO. It is asking me Queue ID and Cluster ID. I know Queue ID can be the Queue Name within 16 limit. But what is Cluster ID and what value I need to fill in it?? Thanks Farooq.
-
Problem with forwarding photos from the camera roll to Facebook
When I go to the camera roll and select a picture and then tap on the forward icon, the Facebook option has gone and has been replaced with tweet. I have deleted the Facebook app and reinstalled it, I have reset my iPhone numerous times but nothing h
-
I dont have sync in peference or when i right click on selected clips. Jim