How do I drag Lightroom 5 to second monitor.

Just upgraded to lightroom 5 and can't seem to do this simple process. I'm trying to move LR to my second monitor and have PS on my main monitor.

Hi acallah
you can active LR in second computer. you can check this out http://www.lightroomforums.net/showthread.php?12046-Question-about-deactivating-license
regards
Deto

Similar Messages

  • Lightroom Slideshow on Second Monitor or Projector??

    Is it possible for me to edit/print photos while presenting a slideshow of the same images on a second monitor or projector?  If so, how do I go about doing this in Lightroom?  Thanks!

    It seems to be possible.
    Bring up the second monitor by clicking the "2" button in the lower left, just above the filmstrip.
    Select "Slideshow" on the second screen.
    Select play on the second screen (upper right corner).
    Edit your images on the left screen.
    Be warned that having the second monitor up can make editing kind of sluggish.
    Hal

  • How do you move Mail, Preview to second monitor?

    This is probably a dumb question... I have a second monitor connected to my Macbook Pro. I can move Chrome and other programs to second monitor by dragging them there. I'm unable to drag Mail, Preview to the second monitor.....
    What am I doing wrong?

    Do you mean ---
    To a second monitor, or to a third, "grade" monitor?
    How "most" people are doing it... among the now 1.4 million licensees of FCP, I can't really comment. I don't think there are that many grade monitors in use, fewer users of even external monitors. For two-monitor setups, the use of a 2xDVI GPU is the way to go, but the video is NOT conditioned for broadcast display, at least up to this version, and not likely to change until Snow Leopard, when the 1.8/2.2 issue is rumoured to be addressed.
    The preferred method that was envisioned by the engineering team was to use an AJA or Blackmagic AV-SDI interface, so that all the up/down/cross gamma and colourspace and framerate and resolution issues could be taken care of by somebody else.
    There is a landslide of opposition to this because "proper monitors and video interfaces are too expensive". So "many" people gaff-tape and Rube-Goldberg "less expensive" solutions using computer graphics displays. They run into a lot of problems, not restricted to, for examples, an inappropriate contrast ratio, non-standard spectral response, and incompatible third-party color profiling which completely garbles the output.
    It is an extremely complex problem. At the moment only SDI is supported, FireWire will likely never happen as it doesn't have the bandwidth to be useful.
    jPo

  • How to use i pad 2 as second monitor

    does anyone know how i can use my i pad 2 as a second monitor to my mac book pro?

    You can try Air Display.
    https://itunes.apple.com/sg/app/air-display/id368158927?mt=8&ls=1

  • How to use an iMac as a second monitor for an iMac

    I have two 21.5 inch iMac's (late 2009) and I want to use one as a second monitor for the other. I have a Mini DisplayPort to Mini DisplayPort connector but when I connect it to both computers, nothing happens. I'm not sure if I'm doing something wrong once they're plugged in or if I have the wrong cable all together. Any tips or advice would be much appreciated. Thanks

    Not going to work, the ONLY 2009 / 2010 iMacs that supported Target Display Mode were the 27" models, 21.5" models simply will not work. Please read Apple FAQ on TDM and you will see I am correct.
    Target Display Mode: Frequently Asked Questions (FAQ)
    While Neil is correct, Screen Recycler's performance is not that good so the user experience probably will not be worth it.

  • How to use an iPad as a second monitor with Bluetooth?

    I know there are several apps that will allow me to use my iPad as a second monitor over my wifi connection. But is there a way to us it over blue tooth or with a special cord?
    Thanks!

    I use a projector as a second monitor for a desk top. When the shutter is closed it is hard to minimize or exit a window. I would like to use my iPad as an additional second monitor so I can tell what I am doing.

  • How can i install Lightroom on a second computer?

    I've been using Lightroom on my PC for years (NOT the CC version).  I want to install it on my laptop so i can use it while travelling.  I believe that the license allows for that. But how do i install it? When i try to do it from the website it takes me to a trial for CC.

    Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.7
    This is the trial version. But on the initial screen that displays when you start Lightroom after it is installed there is provision to indicate that you have a serial number. Choose that option and enter your serial number that you already have.

  • How to enable a secondary view on second monitor

    both monitors are up  and running.  i'm seeing same info on both screens. cannot figure out how to open secondary view on additional monitor.
    what am i doing wrong?
    thanks

    If your monitor is correctly connected to the hardware, then your operating system Win/XP  must see it. But one more step is required: activation!
    So here is a small animated GIF describing that action.
    http://img8.imageshack.us/img8/1317/activerecran2.gif
    If this acyion is working, moving your cursor from 1 display to the other one will work.
    You can start LR and click the small icon "2" in the botton left.

  • How to resolve arrow mouse disappeared in second monitor ?

    We have a MacPro 1.1 with ATI Radeon HD 2600.
    It is not constant.
    Thanks

    If you have two displays set NOT to mirror, they are combined into one huge "extended desktop".
    The most frequent problem with a disappearing mouse cursor in that case is that the cursor has moved off the edge of one display, and over to the other display.

  • How do i adjust brightness on second monitor

    how do you adjust brightness of the second monitor ?? just upgraded the graphics board to ati radeon 5770 and added a second monitor -

    Never mind - found the answer inside the answer to someone else' question - the USB was not plugged in which provided the nice slider

  • Can't get palettes onto second monitor

    I am using Photoshop CS4 and I just upgraded to Mavericks. When I opened PS I discovered that all the palettes that normally reside on a second monitor are now all on the same monitor with my PS document and I can’t drag them to the second monitor. It seems that PS does not recognize there is a second monitor there. I can drag documents and palettes from other applications onto this monitor so it appears to be only a PS issue. Is anyone else having this problem and is there a solution?

    This is probably a silly question, but have you rebooted your Mac?  It's silly to ask because most likely the OS upgrade required a reboot, but hey, I don't know the specifics.
    -Noel

  • Automatically open AI on second monitor

    I have this working in PS, but not AI.  I opened up PS and dragged it onto my second monitor.  Using a Wacom Cintiq.  Now every time I open PS, it just automatically opens on the tablet.  I've tried to do this with AI.  It doesn't appear to work.  Is it just me, or is there a way to make this happen?
    Also, working with latest version of AI on Mac with Yosemite.
    Thanks in advance!
    Jules

    in the displays 'arrangement' part of system preferences you can define which monitor shows the menu (drag it in the little window to change it). this is a system wide setting so every app will have its menu on that window. it's not possible to have different apps with menus on different screens.
    a solution is to learn all the key commands so you don't have refer to the meno often.

  • How do I get Lightroom to find photos on a USB Drive when the Drive letter changes?

    THis is probably a simple question but I keep getting stuck.  I ha
    ve my catalog and some images on my laptop hard drive, but the majority are on
    an external USB drive.  Sometoimes the drive gets assigned
    E:, F;, or G:, and when it cahnges, the catalog says the phots are missing.  How do I get
    Lightroom to find the photos again?
    Tom Barnwell

    The quick fix is to click on the folder containing the missing files and choose "update Folder Location" then find the folder on the USB drive. The longer term and fix you should apply is to set Windows to always give the USB the same drive letter. You can do this through the XP Disk Management application in Computer Management (Control Panel applet). The following screenshot is for XP, but Vista and Win 7 will something similar which can be accessed via Administrative Tools (see second screenshot).

  • How do I drag simultaneously mulitple images viewed in Preview to Finder. I know how to do one image at a time by dragging

    How do I drag multiple images simultaneously from Preview to Finder. I know how to do one at a time. However since I typically shoot at 12 frames per second, sports photography, I have a lot of images to move of one athlete while in motion.

    (A personal footnote):
    Why are you using Preview at all? I hardly ever use it for anything, finding it very limited.
    I am only an amateur photographer, but I much prefer GraphicConverter which, for example, in batch mode would do much of what you ask.
    IMO it is probably the best shareware application ever written for the Mac.
    If you don't know it, give it a try:
    http://www.lemkesoft.com/content/188/graphicconverter.html

  • How do I get photos to preview in a second monitor on Bridge CC?

    This question must have been asked here before but I wasn't able to find the answer. Sorry if this is a repeat question...
    How do I get photos to preview in a second monitor on Bridge CC? It's harder to find the answer this than I expected it to be.
    Thanks.
    Windows 7, i7, Nvidia Quadro 4000

    Thanks, Curt. I wondered if that was it.
    In other CC applications I can detatch the tab and drag it over. I guess it's not that bad to do the stretch, though.
    Thanks again.

Maybe you are looking for

  • So my iphone4 wouldn't turn on and wouldn't show the charge bar well now it's on but cannot see anything on screen it's dark what's wrong?

    So my iphone4 wouldn't turn on and wouldn't show the charge bar well now it's on but cannot see anything on screen it's dark what's wrong?

  • How to Set / change the attribute of Business Object

    Hi all, Say I have a Z Business Object -> ZBO Inside the BO, I have an attribute -> ZA1 And one method -> ZM1 Is there any way in which  i can set / update the attribute ZA1 (for any particular instance) outside the Business Object (I mean without wr

  • Need to change QMS$ITEM_FONT

    I need to change the font size of all generated items from 8 to 10. I don't want to change QMSOLM65.fmb in order to allow future upgrades. My problem is that I can't see any way to change the QMS$ITEM_FONT visual attribute without also copying most,

  • Suppress Cost Feild in Sales Order

    Hi everyone, Client wish to Suppress cost field in Sales Order, as well as in Invoice document. I searched the SDN, and checked SHD0 for BUS2032 --> BUS2032_4440 & BUS2032_4480; but unfortunately, I haven't got any clue. May I request you to guide -

  • SCO-zilla

    I'm working on project that requires me to build one continuous CPTX made up of a main page and 9 lessons. The project requires a progress bar to track progress within each individual lesson, as well as the progress of the course on the main screen.