How do I e-mail videos loaded into iPhoto?

I recorded my child's recital and now want to e-mail family and friends. However, I am not able to do so. How do I go about?
Thanks. Be well.
Miriam

Miriam
You don't, si the short answer. Typically video files are too big to email. Apart from the time it takes to download, you'll get precious little thanks from folks who's Inboxes are over full - on some systems it can even crash their machines. The usual route is to upload the video to a site like YouTube, Vimeo, or a sharing site like YouSendIt or MegaUpload and forward a link to them.
Regards
TD

Similar Messages

Video loading into iphoto as black screen

I have loaded videos from two different cameras. One is fine. The other loaded the videos as black screens. I have downloaded a divx converter per the owner of the camera but it still doesn't work.
When I go to Macintosh HD from my desktop and go to all movies. These movies are there and have a thumbnail that shows a picture. But when I click to play the movie it shows the black screen.
Please help, thanks.
Ben

Ben
This probably means that the Mac doesn’t have a codec appropriate for the video format. Try install Perian
Regards
TD

How do I stop mail from loading old mail?

how do I stop MAIL from loading old messages

What type of email account are you using, POP, IMAP if you are using an IMAP account then you would need to go into your mail settings and change the delete mail after a day, week, month, never.

How do I insert a video clip into the timeline?

Do you happen to know how I could insert a video clip into the middle of a movie like you do in FCP? Can you add tracks and insert the clip above the spot i need to change for each movie.
I don't want to render the whole movie (convert it into a MPeg2) each time.

No - DVD timelines are a little different to FCP. If you need to add a clip to the stream, you need to split the exisitng clip (you could trim it back to where you want to insert the new piece) and drag the new piece onto the same timeline. If you trimmed the existing piece then add another instance of it to the timeline and trim the new part from the left until you get to what you want as the out point.
If you have a collection of video clips on your DVDSP timeline, simply dragging a new one on will shuffle the others along appropriately. However, the audio will not shuffle with them, and you'll end up moving it all manually.
The very best thing is to create the timeline precisely as you want it in FCP and encode it to MPEG2 before bringing it in to DVDSP. Remember that DVDSP is not an editor, it is a place to assemble your work - it won't do anything remotely like FCP in that respect.

How to list the JAR files loaded into the Oracle Database ?

How to list the JAR files loaded into the Oracle Database ?

From 11.1 onwards, the below two views are available to identify the jar files loaded into the Database.
JAVAJAR$
JAVAJAROBJECTS$
By querying the JAVAJAR$ view you can know information about the JAR files loaded into the Database and using JAVAJAROBJECTS$ view you can find all the java objects associated with the given JAR file.
These views are populated everytime you use LOADJAVA with "-jarsasdbobjects" option to load your custom java classes.
But unfortunately this feature is available only from 11.1 onwards and there is no clear workaround for above in 10.2 or earlier.

Fascinate video will not load into iphoto on macbook

my mp4 video opens in quicktime player. I "saved as" in quicktime to a .mov file.
neither the mp4 or the .mov file will load into iphoto.
iphoto error message says, "could not be imported, unrecognizable format."
I tried a new SD card and new video file, no help.

You said that the quicktime video was in the .mp4 format and the saved as a .mov format. I'm not sure but if you are trying to get them into iphoto is iphoto looking for a .jpg format?

Multiple clips load into iPhoto

Shooting an event I need to stop occasionally; as a result I get multiple clips that have to be looked at individually.
) Is there a way of pausing a shoot so that I get one continuous strip?
2)Since Vado loads into iPhoto rather than iMovie, whats the easiest way to get the clips into iMovie for editing and eventually burning a disc?
TIA
apbdmd

Lots of luck, Creative does not let you burn to DVD.
The only choices in their software after loading are upload to the internet.
(maybe we don't want to upload just one clip)
Maybe we want to save our vacation, etc. videos and DVD them to give to relati'ves.
Forget aboutit!
Because even if you can somehow figure out how to drag clips to another editing program. The finished
video will NOT burn to DVD.

How do I copy my video files from iPhoto to iMovie. The two hour wait to view all in iMovie puts the kibosh on my edit time.

How do I copy my video files from iPhoto to iMovie? The two + hour wait for thumb nails and hour long wait looking for the right videos kills the time I have to edit.

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

I my harddrive with my photo library went bad, but I have the photos on my ipad, ipod and iphone. How to I get those photos back into iphoto on my macbook?

The external drive with my photo library went bad, but I have the photos on my ipad, ipod and iphone. How to I get those photos back into iphoto on my macbook?

Are the photos you want to send back to your mac on your iPad, iPod, iPhone saved to the camera roll? If you have photos in other albums (not camera roll) share them to the camera roll.
Then connect your device via USB and lauch iPhoto. You will see your device as a camera in iPhoto. Import those photos like you would import from a camera.

How do I get pics from Preview into iphoto?

How do I get pics from Preview into iphoto?

While you are viewing a photo in Preview, and want to import it into iPhoto, select the document icon in the toolbar of the preview window and drag this icon onto the iPhoto icon in the Dock or in the applications folder.
For example:

Scanned Grayscale files not loading into iPhoto

I have just purchased a new iMac, having not been a Mac User before. I have been importing photos from an external (Windows formatted) hard drive with apparent success. However, on attempting to import some scanned jpegs (Epson Perfection V700 Photo scanner) in 8 bit grayscale, I got the "unrecognised format message". No attempt at saving on the desktop and importing into iPhoto from there worked. I then loaded them into Photoshop Elements 4 on the Mac, and saved again as a standard jpeg, but with no luck. However, by chance I tried saving with the "Embed colour profile: Epson Gray - Gamma 1.8" option unchecked in PE4's "Save as" menu. This time the resulting jpeg file did load into iPhoto. Have you any ideas why the original image did not load and what is the significance of why the "non-embedded" image did. Is there a quick way to convert these images, if necessary, using this method - I have a lot of scanned images like this. Another feature which might confirm what is wrong here is that the in Photoshop Elements, the label at the top of the displayed image shows the jpeg name, then size as a %, and then (Gray/8*). The files which load correctly into iPhoto do not show this "*" in Photoshop.

Download and run *+Embed sRGB Profile 2+* on the grayscale photos by dropping the image files onto the Automator workflow application. You can get it from Toad's Cellar.
This will let you avoid having to rescan those files as RGB color.

My Nikon 7100 RAW files will not load into Iphoto.

My Nikon 7100 RAW files will not load into IPhoto. The computer will recognize the files once the download is complete, but fails to finalize. My version of IPhoto is 7.1.5 and my computer is a Mid 2007 Mac Mini Model. I have Light Room 5, but my wife and I are prefer IPhoto for basic download and sharing. Is there a possibility of getting the RAW files to download ?

what version of the OS?
You need Mt Lion and iPhoto '09 for your camera RAW support - OS X Mountain Lion: Supported digital camera RAW formats -
If your computer will support tMavericks do the free upgrade to it and purchase the upgrade to iPhoto '11 version 9.5.x in the App store
LN

Flash video loaded into FLV Player choppy

I just upgraded to Flash 8 tonight, so I'm a little bit of a
newbie as to the new FLV Player that's included (so cool though!!!)
I was supposed to add a Preloader to a client's file tonight
and got nowhere :(
The Flash video that's being loaded into the FLV Player is
choppy and I can't figure out how to add a preloader. I tried the
AS from the help file, but it didn't work out. I'm assuming this AS
is not for use with the FLV Player?
Any help is GREATLY appreciated. I'm at my wits end with this
and confused as to why I can't preload the movie. The preloader
just blinks for a second, then the movie plays but it's large so it
gets choppy every now and then.
thanks!

Actually I did try setting the buffer to 10 and it didn't
correct the problem. Tried adding the suggested FLV Preloader but
it doesn't work with this instance (component loading external
movie file) so I ended up having to use a different FLV Player
altogether and it worked fine. Seems like there is something wrong
with the built-in component -i f another FLV Player works perfectly
without any additional programming or tweaking and was developed by
an outside source (other than Adobe.)
Thanks for your reply though.

How do I convert my video clips into one continuous video ready for DVD?

I have about 5 videos of my band performing a show. Some of the videos include more than one song. How do I separate these songs into chapters and export the video to DVD format? I'm sorry if this is a stupid question but I have all of the videos loaded up as Events but I don't know what to do from there. Any help would be greatly appreciated thanks.

Hi
Best help You can get as I know of - is one of David Pogue's books
• iMovie’08 & iDVD The Missing Manual
• iMovie’09 & iDVD The Missing Manual
Yours Bengt W

How can i make a video load so i can easily scroll through?

its kinda hard to explain but the little green bar above the timeline means that part of the video is loaded right? but it never goes through the whole video so i struggle to edit because when i scroll i have to load each frame individually , how do i make them all load? thanks

You have a fundamental misunderstanding and need to brush up on the basics. AE is not a realtime app!!!!
FAQ: Why does RAM preview only play part of my composition?
Mylenium

How do I e-mail videos loaded into iPhoto?

Similar Messages

Maybe you are looking for