How do I edit a drag and drop action in CP8?

Once the drag-and-drop interaction is created, I cannot open the wizard again. In CP7, it was possible to edit the answers in properties. How do I do it in CP8?

In cp 8 also you can edit the interaction. This you can do the same way as you were doing in Cp7. but you need to have a look in the rearrangement of properties into sections in drag and drop panel in CP8.
I believe you are configuring the DnD interaction through launching the Wizard. After you configure the interaction open "Drag and Drop" panel from the "Window" Menu. Now In the Panel you can see the options to edit the interaction.
For changing the answer matching you need to open "Correct answers" window(which you were finding in DnD properties panel in Cp7)in cp8 you can find this option from the same panel under "Options" Tab section.(as shown in snap shot)
let me know if this resolves your issue.
devraj

Similar Messages

I am trying to import an mp3 audio file into garage band for editing. drag and drop doesn't work. What now?

I am trying to import an mp3 audio file into garage band for editing. Drag and drop does not work. any ideas?

Try reposting in the Garageband forums. You can find it at:
https://discussions.apple.com/community/ilife/garageband

Lost drag and drop properties panel CP8

I developed a project in Captivate 7. It included some drag and drop interactions. I've upgraded to CP8 as we want to be able to release the training on mobile devices.
I have not set it up to be a responsive project at this point - I've not learned enough about how to do that.
I can create and edit new drag and drop interactions but as soon as I save them, close the file and reopen it, they are no longer editable. The drag and drop properties panel won't show up, the D&D outlines (blue and green) disappear, the D&D option in interactions is greyed out and I cannot edit the interaction at all. It still has the submit button in the corner and this cannot be deleted. There doesn't seem to be a way to edit the interaction at all.
When I go to close the file and save it, it tells me that it is a captivate 7 file and as soon as I save it, it won't open in Captivate 7 only 8. Save as just saves it as a Captivate file.
How can I work around this?

Drag&Drop would not work in responsive projects anyway.
Maybe this is due to the upgrade? And I suppose you are working in Newbie mode, where panels are controlled by Captivate? You could try in Expert mode (fourth option 'Enable...' in Preferences) because it will allow you to open the Drag&Drop panel from the Window menu.

Move components using mouse - drag and drop action?

Hi,
As attached, I want to move one component at the bottom to top using mouse in drag and drop action.
But I don't know why it returns to the origianl position. it never move.
Is there anyway I can change configuration to accomplish this?

Hi,
I tried this as you said, but it wont' work.

How do I create a drag and drop interaction using Captivate 8?

I cannot figure out how to create a drag and drop interaction in Captivate 8. Options to do this are greyed-out.

You can only use D&D in normal projects, not in responsive projects.
http://helpx.adobe.com/captivate/kb/top-issues-captivate-8.html

How to create border by drag and drop

anyone can tell me how to create compound border using drag and drop for my interface??
thank you.

I have no idea what you're talking about. Please ask real technical questions instead of generalized and visualized questions.
Seen the technical level of your questions as far, I highly recommend to stop immediately with that visual editor and start writing code yourself. Don't brainlessly drag'n'drop as long as you don't understand at all what happens behind the scenes. You would only get yourself in deeper trouble after all.

How to allow visitors to drag and drop photos

I don't know what it is called (let me know the term if you know) but I would like to learn how to design a web page that allows the visitor to move things around to custom design something -- ie. drag and drop images in the website. My wife designs jewelry and I have seen some sites that allow visitors to drag and drop beads onto a bracelet to design their own bracelet.
Any help is appreciated.

I have no idea what you're talking about. Please ask real technical questions instead of generalized and visualized questions.
Seen the technical level of your questions as far, I highly recommend to stop immediately with that visual editor and start writing code yourself. Don't brainlessly drag'n'drop as long as you don't understand at all what happens behind the scenes. You would only get yourself in deeper trouble after all.

How do I enable text drag and drop in Mail?

Simple enough question. I'm sure I had this at one time in my Mail app, but it doesn't work now, and I see nothing in Preferences to enable it. Can anyone tell me what I'm missing?
Rob

Just found the problem. The old Kensington Turbo Mouse I was using won't work with drag and drop. It doesn't work even when I dedicate one of the four buttons specifically to Drag. Attaching the regular mouse solves the issue.
(Though not, interestingly, with the text in InDesign, the application I'm using throughout the day).
Rob

How to reduce size of drag and dropped screenshot without extreme pixilation / loss of quality?

Using CS6 with OS 10.9.4 I'm dragging and dropping a screenshot with a resolution of 1135x1006 pixels into file with a size of 5760x3600. the image is a rendering of a planet created in a different program and I need to compare its size to another planet already in photoshop. This means I need to decrease its size quite a lit to get it to the correct proportion. When I do this the image winds up looking like a 100x100 thumbnail or something, its terrible. I'm a photoshop newbie and even though I have read other online discussions about similar issues I don't understand what they are talking about. Here is the large planet I'm comparing the small planet to.
And when I import the image of the smaller planet and resize it it looks like this:
I can't have this sort of thing going on especially if I want to export the file at any decent resolution such as 2880x1800 or 3840x2160.
Please help.

Which file formats are eligible for your purposes?
non-destructive compression has limits, so you may have to compromise.

How do I execute a Drag-and-Drop restore onto a new HD

Ok, so...
While I was backing up my HD with Time Capsule the other day, it started to fail (yes, irony abounds).
So, I have a great repair shop trying to recover my data and I did get a new HD and clean install of Lion (what I was using before the failure), but I don't have a complete Time Capsule backup.
What I do have is an older drag-and-drop copy of my User folder and almost all of my apps, but I am not sure in what order to do the following and if I am missing any steps:
1. Run Software Update
2. Drag my old User Folder over (and if I should so this as one big drop or piece by piece).
3. Update Apps
Is there something I am missing?
Thanks!

You can only use D&D in normal projects, not in responsive projects.
http://helpx.adobe.com/captivate/kb/top-issues-captivate-8.html

How do I upload or drag and drop folders into my website folder content?

Am I limited to uploading or dragging and dropping only files? I have folder content I want to place in these folders in mmy Creative Cloud Accounts websites?

Thank you Manish-Sharma for offering help. I have way too many individual files to upload singly. It would only be opportune to upload the individual folders. Until Adobe creates such to upload folders, there is no reason to upload any content so I will not be able to benefit from displaying any content. I just do not have the time to upload by this means. So, it is a feature that makes no worthwhile availability in Adobe Creative Cloud to me. This really needs attention by Adobe otherwise it is a major point to not continue using Adobe Creative Cloud. It makes no sense to lack the ability. John

Can't drag and drop actions into a set

I'm using CS4 and haven't had this problem before. After loading various actions, I am unable to drag and drop them into one of my sets. The actions either drop above or below the set.
I'd appreciate any suggestions.
Thanks,
Carole

I can't think of any reason for this behaviour.
Maybe it's time to try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults. (A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)

Drag and Drop Action

Hi,
I have create a drag and drop slide, i wish to have difference "Interaction" so that my A B C will have it own right and wrong image.
i have try to insert the Action, example:i have create Action for A ,Show Image_17 when Success and show Image_25 when Failure, but when i wish to create another Action for B, it will automatic gave me the Action of A . If there have any solution? Thanks

You might need to do this as a two-step process. As Lieve points out, you can perform an action on drop of each object, but you also get the opportunity to perform another action when the entire interaction is submitted for evaluation.
So you could use the individual drop actions to set the value of user variables you set up to track which object is getting dropped, and then you could use the Submit action to SHOW or HIDE images based on the values of these user variables.
However, where things might run get tricky is setting up the Advanced Actions to register exactly which target received which drag object to determine whether it was a correct match or not and then execute an appropriate action. The Submit action usually only registers whether the overall interaction should be marked Success or Fail. It doesn't give you any real breakdown as to which drag objects were placed on which targets. You would need to call up the Accepted Drag Sources dialog for a given Drop Target and specify an Action to perform if the Target accepts that particular object, e.g. to set the value of a tracking variable.
What I'm trying to say here is that this can get a little complex. So don't expect everything to fall into place immediately. You may need to fiddle around quite a bit to get it working exactly the way you want.

HT1026 When I do this a copy is created, and when I try to move the old file to trash I get a warning that this clip will no longer be visible in my project. How do I make the drag and drop move the clip and not just make a copy?

In Imovie 2008 when I drag an event to another drive, the event is copied and not moved. Thereafter if I try to move the original clip to trash I anm warned the clip will no longer be accessible in the project it is linked to. How do I get to move the clip and keep it connected to the project?

I have iPhoto '09. The problem occurs when I try to move a photo from iPhoto onto a document or anywhere. I click on the photo and try to drag it to the document. When I do this a message box pops up saying that the file cannot be opened because it is empty. This only happens with a small number of photos but I just don't understand the fact that I can see these photos (and print them but only directly from iPhoto) but I can't do anything with them since, for some reason, the computer is seeing the file as empty.
Hope that helps. Thanks.

How can I make a drag and drop movie clip to disappear when it's dragged in a specific area?

I have a movie clip that also has the function to duplicate. What I want is that if the user dosent want so many duplicates, to have an area where if he drags the duplicates, they will disappear. Thank you.

I've search on google but I did not found any tutorial for this particular thing. I found instead this code :
on (press) {     startDrag ("", false);
this.swapDepths(_global.depth++);
on (release, releaseOutside)
stopDrag ();
this.swapDepths(_global.depth++);
if (this._x > 493.250000 && this._x < 636.050000 && this._y > 142.900000 && this._y < 271.350000)
   this.removeMovieClip();
    } // end if
but I don't know how to make the _x/_y to work, better said I changed the values but nothing happend, did I did something wrong ? The first _x/_y stands for the position? I've played with the range values but cant seem to make it happend.

How do I edit a drag and drop action in CP8?

Similar Messages

Maybe you are looking for