How do i edit a Lightbox Component?

Hi All,
I created a Lightbox Component and closed it off, but i would like to knw how do i re-open it to add more photos?
Rgds,
Mark

Double click on the instance of the component on the stage. This will let you edit the component. You can not edit the component via the library.
Does that help?
Chris

Similar Messages

How do I find out the component ID on a certain page?

How do I find out the component ID on a certain page? problems is that I'm using some page template which I do not have source code for that.I need to find out the component id to pass to UIComponent.findComponent(id) as parameter. is there anyway?
Thanks

If you go to the partial trigger property of any of your page component you can open the edit partial trigger browser.
There you can find the components of your template and their ids

How can you edit a previously burned DVD from an older iMovie app?

I converted VHS home movies to DVD years ago on the origonal iMovie app. How can I edit those DVD's now? Do I need a third party app to convert the DVD files for use in the new iMovie?

Yes, you need to 'reverse engineer' the highly compressed mpeg2 format of the DVDs.
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

How to make a global scope component to be thread safe?

One of my global component preserves states in its member variables, I am afraid that it's might messed up in multi-threading conditions, so how to make a nucleus global component to be thread safe?
Edited by: user13344577 on Jul 14, 2011 9:45 AM

Hi,
Just to help integrate Shaik's and my own seemingly contradictory replies:
If the member variables in your global component actually need to be globally available, so that multiple threads/sessions need to seem the same data, then you need to use synchronization or some scheme to make this data thread-safe when updating it. If the member variables are non-global data and are simply for convenience of having data available for multiple method calls or something like that, then you should do as I said (don't use synchronization) and use one of my suggestions to avoid this.
I have seen customers frequently do what I replied about and store non-global data in a global component, and Shaik simply interpreted what "user13344577" is trying to do differently. Clarification is needed to know which of our answers better applies.
Thanks.
Nick Glover
Oracle Support for ATG Products

How can I edit material from 1 or more dvds that I created from my own filmed material in iMovie but which I no longer have in iMovie

How can I edit material from 1 or more dvds that I created from my own filmed material in iMovie but which I no longer have in iMovie

You need to 'reverse engineer' them :
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

How to insert Javascript into LinkToURL component

Hi all!
I want to start several applications inside the intranet page.
To do that in HTML I can access applications by a Javascript code, instantiating Windows Script Shell ActiveX.
How to do that in LinkToURL component? Is there any other ways to do that?

Hi,
Same issue discussed & resolved in below link..
Re: Procedure: Display of HTML stream using LinkToURL/LinkToAction UI Elements
Raja T
Message was edited by:
Armin Reichert

How can I know the right component for a transaction?

Hi, I have a question
When creating a new message in Solution Manager, notif_create, how can I know the right component given the transaction code or program name?
Thanks in advance
Edited by: María Valdés on Aug 19, 2008 6:25 PM

Hello Maria,
Well, in the Support Message window, place the cursor in Component box and press F4. This will brings up another window which contains the components list to which you are authorized. From that list you can choose about which component you want to create that particular support message.
For example, if you are from Quality department, the following can be visible when you press F4.
QM - Quality Management
-- QM-ADB Adobe Forms
-- QM-ADB-PRN Print Forms
For the Print Forms, the component will be QM-ADB-PRN
I hope it helps.
Cheers,
Satish.

How to remove padding from lightbox

There seems to be a natural amount of padding when making a lightbox. How can I edit that amount of padding so that I may have a full bleed lightbox?

You can see 3 containers. Starting from the furthers outside: document/page (gray), Lightbox background(lightgray), lightbox container(black). If I widen the lightbox container(black) the lightbox background scales to keep about 20ish pixels of padding. This becomes extra problematic because if the lightbox floods out of the document then it creates errors. I would like the image to bleed from left to right with no padding; thus, no margin/padding just directly touching the page edge.

How to add feeder class to component configuration in fpm

Hi
I am using form guibb and list guibb into my wdapplication. Here i required to provide feeder class to component configuration. I don't know how to provide feeder class to component configuration. Kindly provide the steps to
how to provide feeder class to component configuration.
Thanks&Regards,
Chiru.

Hi,
What i would do is the following.
1. Create a feeder class by Copying the existing Feeder class .
2. Go to the FPM_LIST_UIBB component and select a component configuration->Start configuration.
3. An explorer window is opened->copy the configuration
4.Fill in the new configuration details.
5.Press the change button (in your new configuration ).
6.When you are in the configuration screen->press Edit feeder button
7.Enter your new feeder class which you have created in step-1.

How do you edit text that is in a text box?

How do you edit text that is in a text box? I just want to change the font color of the text. Solution in the Help files recommends selecting the text and then selecting Optional) To make further changes to the text box:
   Using the Select tool or the Text Box tool, click an edge of the text box to select it, and then drag a corner to resize it. Use the Properties toolbar to change the border and fill options.
   Double-click the text box to edit the text or change the text attributes. Drag across text to select it, and then select options from the Properties toolbar.
This is what the help files recommend
(Optional) To make further changes to the text box:
   Using the Select tool or the Text Box tool, click an edge of the text box to select it, and then drag a corner to resize it. Use the Properties toolbar to change the border and fill options.
   Double-click the text box to edit the text or change the text attributes. Drag across text to select it, and then select options from the Properties toolbar.
When I try the above solution I don't have a "Options" in the "Properties" toolbar.
Why would they change a process that was so simple in previous editions to such a hidden awkward process?

Try with a Brightness/Contrast adjustment layer and/or changing the blending mode.
If the effect is too much for the rest of the bulb, you may be able to mask it out.
It would help if you post a representative picture here on the forum page for us to look at.

How do I edit text in a fill-in form?

How do I edit text in a fill-in form? I am using Adobe Acrobat Pro version 10.1.8 in Mac OSX. The document was created in Word, saved as a pdf, opened in Acrobat, and form fields added. Now I need to change some of the text on the original form (mostly just dates). Ideally, I wish there were a way to edit the forms overall - add or delete lines, edit text, etc. I've done this before, but I always seem to need to go back to Word, edit the original document, and then re-create the form fields... it takes me a huge amount of time, making sure each field is formatted correctly (font, size, wrapping, text resizing, etc) so it looks ok when the user enters their data and prints it. Please, tell me there is a better way!
If the solution is upgrading to a higher version of Acrobat, I'm listening... but ideally I can get this batch done in the software I have, then worry about learning the newest version.

Fonts are Licensed asset's subject to single user use. They are not intended to be exchanged, redistributed, etc.
As part of the PDF standard they included in a document so that the document can be viewed reliably without the font be installed on the viewing station.
To edit you must have the font installed on your computer. The ability for second parties to use the font would violate font licenses.

How do I Edit an Existing PDF Form Without Losing Form Functionality

I'm brand new to Acrobat but familiar and proficient with Flash, PhotoShop Premiere Pro, After Effects, Dreamweaver, Fireworks etc.
The company I work for sells office supplies. We sell 57 distinct items. We have Acrobat 9. I am designing a PDF order form with fields that can be emailed to our clients as an attachment. They fill out the form, it calculates the total, they send it back to us, we fill and ship the order. Basic and straightforward.
I can add form fields to my order/pricelist... not a problem. The question is:
Once I have brought a PDF into Acrobat and add 57+ fields and calculations, which is a time consuming process, how do I edit an item price at a later date, if someone in the company decides to make a change to our pricing?
See..., If I save the original Microsoft Excel document as a PDF, Acrobat can't edit the text for some reason. Something to do with "Renderable Text". Now if I open the PDF saved from Microsoft Excel in Adobe Illustrator, I can use the text tool to make changes. That doesn't help me... just saying. Why can't I edit "Renderable Text" with the Acrobat Text Tool? Someone in a forum stated that Acrobat is NOT a word processing program! If that is an accurate statement, it would appear that Acrobat can at least work with base PDF documents to make certain types of modifications and add functionality. Is that correct?
Here's the problem. I create a PDF with form functionality. Everything works great. The boss says, I want to change the price of the scissors. I can't change the text in Acrobat because of the "Renderable Text" nonsense. Does this mean that I have to re-apply all of the form fields and calculations to the new base PDF document every time there is a minor change? I know there has to be a simple work around. Should I upgrade to a newer version of Acrobat?
Is it possible to save the original existing form functionality as a layer or overlay to be applied to the new modified base PDF document? Kind of like so many other Adobe products do including PhotoShop, Fireworks, Premiere Pro, After Effects, Flash etc., so that all of the form functionality can be applied in one big chunk? Premiere Pro has the time-saving feature of "Paste Attributes". It's a real time saver.
It may be simpler to just direct me to a video that goes through the process of creating a PDF order form with fillable fields that multiplys quantity by unit price and totals one column.
I already created a prototype of the form in PhotoShop which can be saved as a PDF. The finished order document appearance has 95 horizontal 3px wide lines and 6 vertical 3px lines, kind of like what one might expect to see in an Excel spread sheet. The form also contains some graphics and unconventional text areas that acrobat could overlay text fields and everything would be fine.
With these great number of horizontal dividing lines, It doesn't seem practical or even possible to create the basic layout in Acrobat. As I originally stated, I'm new to Acrobat and would like suggestions for a workflow that enables easy editing of an existing PDF document with form fields. I want to avoid the monumental task of re-doing all of the fields and calculations.

For what you are trying to do that is probably what you want -- Replace Pages. There are a few more issues that you need to be aware of since this is a business form. If customers are using Reader XI, it is not an issue.
On the renderable text, can you see the text list when you look at the font tab in the document properties (ctrl-D)? If not, they you do not really have fonts to edit. This may be the type of fonts you used in the original or the way in which you did the conversion to PDF. You need to have fonts that are on your system and then be sure to embed them (otherwise others may not be able to read them because of different OS or such).
As to e-mailing the form, that is fine (though there are sometimes problems with various clients and PDFs -- but usually on the sending end).
For collecting the data you may want to try a different route. For users of Reader XI, they can save the form with the data. Prior versions could not do that unless you enabled the form for Reader. However, this latter process has a 500 form use limit -- A license issue. If the data is submitted, then it does not make a difference. The folks with Reader XI can still save the form with the data, others will have to print a copy for their records.
The data can be imported to the form on your end and so you would have the exact same results as what was filled out. However, the submission process should be set up to submit to a web script for your receipt and not use mailto. The latter has problems that you have no control over due to proper operation with the mail client on the user machine. Typically the mail client must be the default and use MAPI. In any case, it is not reliable (not for business use). So submission to a web script is useful. The data in AcroForms would be of the type FDF (or possibly XFDF). If for some reason use created the form with Designer, that limit any editing in Acrobat since it is no longer a real PDF, but an XML container that Acrobat and Reader can display and interact with, but not change. Again, submission to a web script is still preferred.
For dealing with a web script and some coding for various languages, you can check out the FDF Toolkit. It has been around a while, but should still handle the CGI needs of the submission. In addition, it has tools for adding the data to a database and other typical operations for data collection. You can save the FDF files and import them to the form and deal with the data there also.
The use of Replace pages would do the job if all your form fields will still need to be in about the same location. Form fields are mark up and the pages are referred to as the document. Thus the replace pages will just original page and leave all the form fields. You will still need to go back and fix the value within the fields themselves, but that is a field edit.

How do I edit my pictures on my computer?

How do I edit my pictures on my computer?

This should help. The Revel apps for mac, iphone and ipad have editing. The web version does not support editing (adoberevel.com). What platform(s) are you on?
Pattie
EDIT
FAQ: How do I edit photos in Revel?
http://forums.adobe.com/message/5088287#5088287

How can i edit contacts in bulk

Bought an iPhone 5 and transfered contacts from my old phone and my phone contacts first and last name were reversed. How can I edit my address book contacts in bulk instead of one at a time? And then have these updates in my iPhone 5?

to any1 that wants to use the scripts and have them work just type "save" on the next like after end tell and itll do it........

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How do i edit a Lightbox Component?

Similar Messages

Maybe you are looking for