How do I edit EX1 footage?

EX1 footage gives me MP4 files. When I import these files into CS3 I get a message whereby Premiere can't handle this format. I have the latest Premiere upgrade patch. Am I doing something wrong?

I'm no expert at this but have been working with CS3 and EX1 for a few months now. No problem at all. Just plain pleasure. Importing_times over usb cable - well about realtime I guess. (Invested/upgraded to ProspectHD but wouldn done that if it wasn't for my FX7- backup cam).
btw: If you can afford I really would reccomend VortexMedia's guide on using EX1 - includes one chapter on file handling & workflow,

Similar Messages

  • Editing EX1 footage with Premiere!

    I could not yet get a straight answer on the Adobe forums so I'll try again.
    Up until now I used Cineform codec (Aspect) to edit HDV. I would import in Aspect, edit Aspect, and Export Aspect. All my rendered archive footage is in Aspect.
    Fine... now here comes the EX1 with its EX1 files. (Let's call it EX1 codec).
    I have two options:
    (1) Either I use the old technique and stick with my Cineform Codec, make the conversions and edit in Cineform. (The advantage is that I can render AVI files which I can render back and forth from one program to the next or do color correction on it with minimal generation loss). This option would require me to purchase Cineform Prospect HD (for full HD resolution) and convert all my EX1 files prior to editing. It would also require me to edit in CS3 as Cineform is not yet compatible with CS4.
    or
    (2) I can edit the EX1 footage natively in CS4. This option would allow me to avoid the conversion hassle and having to purchase Prospect codec. However I don't see how I could render AVI files for going from one program to the next. Moreover I don't know what that means in stability or rendering speed and/or general processor handling capacity once I have 10 layers of footage to run. Also I don't know about color correction and the generation loss one can expect when doing it natively.
    Does anybody have experience with this? I don't have any feedback and have not been able to make a decision on this yet.
    Thank you for any help.

    >Also I didn't hear you tell everyone you actually purchased CS4.
    The troll actually told everyone that it did not buy a license for PPro and has only purchased upgrades. The troll protests too much.
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • How do I edit R3D footage from my Red One and Epic?

    Log and transfer is gone.  Native support not available.  It says 4K on the website, but it won't edit 4K in the real world.

    Hi Try a Reboot press power button & menu button hold both down until you see Apple Logo This can take upto 30 Seconds. Also you need to update software to ios 8.1.1 If you still have problems it maybe a Hardware Fault. Cheers Brian

  • Edit HD footage

    How to you edit HD footage? when I watch my footage in the viewer it is 1080, but as soon as i drag it onto the timeline it turns into standard definition. How do I allow the footage to be edited in 1080 HD on the timeline?

    Create a new Sequence with the settings for the type of HD footage you're working with.
    -DH

  • In version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

    in version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

    The switch is in the upper right of the viewer.

  • I am using 4K Footages for editing in Premiere pro CC 2014, but its getting crash in between at every 15 to 20 mins. Kindly suggest how can it be solved, does any plugins or settings needed to edit 4K footages? Also would like to mention that footages fra

    I am using 4K Footages for editing in Premiere pro CC 2014, but its getting crash in between at every 15 to 20 mins. Kindly suggest how can it be solved, does any plugins or settings needed to edit 4K footages? Also would like to mention that footages frame rates are 29.97 and i have set timeline to 25 FPS is requirement by client. kindly revert. Thanks

    Thanks Richarad ..It has solved the problem but still crashes some times .As the programme has the break (bumper)after every five minutes ,i hope it will not compress bumper time too after export.

  • How efficient is CS5.5 on a 7200 RPM HDD to edit HD footage?

    I presently have two Seagate Cheetah HD -146.8 GB internal 3.5" SAS 15Krpm 16MB in RAID 0. This is the recommended configuration from Adobe to manage uncompressed HD footage.
    If I install the Production Premium on a 7200 RPM HD, would it be the same efficiency as the RAID 0 configuration to edit HD footage?
    I also have an Intel Core i7 Extreme Edition/ 3.2 GHz processor, a ASUS P6T DELUXE /OC PALM MOTHERBOARD 1 390.00 390.00 AB Motherboard - ATX - iX58 - LGA1366 Socket - Serial ATA-300, and a Quadro CX Graphics Card NVIDIA PCIE 1.5GB with 24 GB of RAM. I also have a 1 TB 7200 RPM HDD for storage.

    To Mylenium. You're right, it's not about the footage. The Raid 0 configuration at 15000 rpm is for the Adobe Premium CS5.5 64 bit. When you open Premiere, After Effects or Photoshop, it's incredibly fast because of the Mercury Engine. And you can playback HD footage in real-time without rendering. That's what Adobe and most experts recommend. But I was wondering how the Premium CS5.5 performs when installed on a regular 7200 rpm HD.

  • How do I edit Quicktime .mov video file in CS5 Extended ?

    Hi !
    I'm a photographer using Photoshop CS 5 Extended and editing video using Apple Final Cut Pro 7 NLE editing studio.
    I'd like to edit video footage in CS5 Extended. I have a Quicktime video .mov file that was shot with a Canon 5D2 and Canon 15mm fisheye lens and i would like to defish the footage to rectilinear using Photoshops Lens Correction Filter.
    I have tried opening the movie file in CS5 Extended and it appears as a video layer in my layers window. I can defish the first frame (according to Animation palette), but the lens correction needs to be over the whole footage not just the first frame.
    How do i do this and then output retouched / defished .mov file ?
    I assume you can use a similar process to clone out dust spots in footage too ?
    Any help and advice would be much appreciated ... thanks ...

    Wow ! That was a speedy reponse ... thankyou !
    I didn't realise i needed to convert into a smart object ... I tried that and it works !
    Woohoo !!
    Only problem is ... the 10 second QT .Mov file has changed from 65Mb file size to 2.2Gb. It looks similar quality and the Quicktime settings were just default (High).
    Any idea why file is sooooo big ?! Or how I can reduce it without losing too much quality ? Can't quite understand why the file size has ballooned and would be a problem editing it in Final Cut Pro 7.
    Thanks again ...

  • How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?

    Hello,
    How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?
    I have tried several tutorials but these either:
    - show correction in premiere sequence (which is not practical; given the huge number of files we have)
    - or show the editing in audition of a sequence, not the clip.
    We have started merging audio and video (removing the original audio during merge) but some of the merged clips are out of sync, so we need to correct manually, BUT we want to correct the merged clip, which may or may not end up being used, so we do not want to take it to the sequence as all we are doing is prepare the synced files for editing.
    Any idea how I can correct the synchronisation in Audition?, when I right click on clip and select "Edit in Adobe Audition" I get a list of files but not a multitrack session where I can see my video and audio tracks.

    if premiere pro doesn't sync your footage properly, and you have a huge number of files, you may want to look at pluraleyes.  there is a demo, and if it works properly, it would save you time to have it done right the first time, instead of tracking down random merged clips with bad sync.
    premiere will either export a complete sequence or "edit clip in audition". the edit clip will create a copy of the original audio and open that in audition. there is no dynamic link, its just an audio file open in two programs at the same time.  since there is no dynamic link, its not possible to bring merged clips into audition.
    Adobe Premiere Pro Help | Synchronizing audio and video with Merge Clips
    Once created, the merged clip cannot be re-synchronized, or adjusted. You must make a new merged clip.
    Merged clip audio results in mono track audio only.Final Cut Pro XML and AAF interchange formats are not supported.
    this doesn't give me much hope that audition or any other adobe program outside of premiere will help you fix the problem merged clips.

  • How do i edit move file in pre elements

    I shot in a canon 60d  the footage is not supported in pre elements ,how do i edit move file in pre elements

    issac
    What version of Premiere Elements are you using and on what computer operating system is it running?
    When you write "move" file, do you mean "movie" file?
    Do you have QuickTime installed on your computer along with Premiere Elements? If not, please do so.
    Generalizing because you did not give all the details, I would say that the Canon 60D AVCHD.mov file should be supported by
    Premiere Elements as long as you have QuickTime installed on the same computer with Premiere Elements.
    Please review and consider and supply more details.
    We will be watching for the details.
    Thank you.
    ATR

  • How do I edit 1080/50p from my TM700

    I have a Panasonic TM700 and am not sure if Premiere Pro CS5 can edit my footage and if it can, what preset should
    I use. (my computer handles the raw footage perfectly, I just don't know how to edit it)

    Start a new project
    Start a new sequence
    Select custom and put an own name there (e.g. TM700)
    Select TM700
    Select the "general" tab
    Enter the settings
       editing mode = desktop
       time base = 50 frames per second
       frame size 1920:1080
       square pixels
       progressive scan
       display format 50 fps
    Start editing your video
    When finished select: export - media
    Export settings: match sequence settings
    That is it!

  • Editing Red Footage in premiere help

    Hi,
      Finally, I decided to edit red footage in Premiere cs6 this is my first edit can any one plz help how to Edit red footage,i mean red is a raw footage,am i first grade(basic color correction) the footages or edit the footage  (my confusion) and then finally grade it,i am choosing speedgrade to grade- plz tell me the whole pipeline thanks.

    Information FAQ http://forums.adobe.com/message/4200840 questions to answer
    Red Camera http://forums.adobe.com/thread/876142
    -and http://forums.adobe.com/thread/901142
    -laptop http://forums.adobe.com/thread/900733
    -Rocket Card http://forums.adobe.com/thread/906227

  • How to re edit nested sequence?

    i've already nest and render a whole 3 mins video. now i would like to make changes in some parts of video. how do i edit the rendered video?

    Hey thanks but it just turn into green. Previously it was blue in colour. The raw footages are not with me. So, i can't import those files. I need to edit the titles. Is there any options to re edit the title?

  • How quick to export HD footage on new Macbook Pro?

    I have a mid 2007 Macbook Pro (2.4 ghz Intel Core 2 Duo, 4 gig memory, 7200 rpm hard drive) and will be editing HD footage soon. I've been told I should avoid it with my laptop though it seems to work fine on the whole.
    What it does seem slow on is exporting and was wondering if someone could help me judge this....
    I exported a Quicktime Movie of 2 mins 59 secs of XDCam EX footage shot at 35 mbs and it took 10 mins 51 secs. (I put a couple of lower thirds on it and few video tracks.) Just how does this hold up against a new Macbook Pro? Is this good or bad?
    Thanks

    do some searching here.  My experience has been to set up my xdcam sequences  to render as prores.  I thought this sped things up as I think every bit of an xdcam sequence has to be rendered even if you're exporting with current settings, but I seem to remember a recent thread saying this wasn't true.

  • Sony EX1 footage renders jumpy

    Hi,
    This is frustrating me to know end.
    I just imported a PPro Mac project into AE Mac with Sony EX1 footage.
    When I render, some of the clips jump back and forth (forward and backward) randomly.
    It plays fine in PPro and I can RAM Preview a single clip in a separate comp just fine, but a render or RAM Preview jumps.
    Any suggestions?

    I'm creating a work-around for the EX-1 black-dropped-out frames in After Effects (X64 CS3 CineForm):
    1. Edit a 'story board' in Premiere with the EX MP4 raw-files
    2. Convert only the files I need (from all the 150 shot) in the CineForm-HDlink app to .MOV files
    //filesize will become a little more, will shift a couple of frames from the MP4-raw, quality the same
    //HDlink is a BAD application, because I have to transcode every MP4 file seperately. MXF files are bugging in HDlink
    //HDlink does NOT trancode the audio into the new .MOV file! Sucks.
    3. Replace the Premiere 'edit-MP4-raw-files' with the converted .MOV files in After Effects
    4. Re-sync all the audio, 'export audio' from the MP4-raw files in Premiere to AE
    5. Voila! Render without troubles
    I love Quicktime!
    -Yeah, it sucks not to work natively-
    Any new suggestions would really be appreciated!

Maybe you are looking for

  • Default formula in report painter

    Hi, We have added one total 'column formula' and one percentage 'line formula' The problem is in the cell met by these two formulas. The system takes the column formula by default. How can we modify this so that the system takes the line formula by d

  • For GR material Docc is not posted to backend

    Hi, I have a problem when try to do the GR. We have a PO for 2 line items. User has done the Invoice for these two line items for full Qun but with lesser amount than the PO. After that user have done confirmation for one line item. But this confirma

  • Every time I update Firefox I can't get back on the internet. I have to uninstall and go back to an old Firefox.

    I have an old Firefox. Every time I update to a new version, I can't get back on the internet. It tells me it can't find the server. So I have to uninstall the updated version and go back to my old version.

  • Down Payments only with Down Payment Request

    Hello, is there a way to post a down payment only from a down payment request, i mean that the user only can make the down payment from a previously down payment request. I notice that there is a SAP message F5002 , how can i activate this message, b

  • Mapping the hand tool to a mouse button

    I know you can use the tab key to switch between tools, but what I'd really like is to map the hand tool to the middle mouse button.  When I press the middle mouse button, I want the hand tool to pop up and grab the diagram so I can drag it around th