How do I eject a DVD that won't appear on my desktop?

I tried to read a DVD furnished to me but when I loaded it into the computer it won't appear on the desktop. How do I get it to eject?

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
  1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
  2. Press the Eject button on your keyboard.
  3. Click on the Eject button in the menubar.
  4. Press COMMAND-E.
  5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

Similar Messages

  • How do I eject a dvd that does not show on the desktop

    How do I eject a dvd from the drive when it does not show on the desktop?  I tried restarting and the drive makes noise but does not eject the dvd.

    oldlarry wrote:
    How do I eject a dvd from the drive when it does not show on the desktop?  I tried restarting and the drive makes noise but does not eject the dvd.
    Hold down the mouse button while restarting. This should eject any disc in the drive.

  • How do I eject a CD that won't come out of the optical drive.

    How do I eject a CD that won't come out of the optical drive on a MacBook Pro . I have tried the ejcct key on the keyboard. There is no longer an eject disk on the drop down menus. Any ideas...?

    reboot while holding down the mouse/trackpad button until the disc ejects.

  • How can i eject a dvd that seems to be in a reading loop

    how can i eject a dvd that seems to be in a reading loop

    A few options: restart holding down the mouse button; launch Disk Utility in Utilities folder, select the DVD on the left and click on the eject button.
    More suggestions here: http://osxdaily.com/2009/08/28/eject-a-stuck-disk-from-your-mac-dvd-super-drive/

  • How do I eject a DVD that just keeps turning in drive but will not eject?

    How do I eject a DVD that just keeps turning in drive but will not eject?

    check out Kappy's user tip:
    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
    1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
    2. Press the Eject button on your keyboard.
    3. Click on the Eject button in the menubar.
    4. Press COMMAND-E.
    5. If none of the above work try this:
    Open the Terminal application in your Utilities folder. At the prompt enter or paste the following: /usr/bin/drutil eject.
    If this fails then try this:
    Boot the computer into single-user mode. At the prompt enter the same command as used above.
    To restart the computer enter "reboot" at the prompt without quotes.

  • How can I eject a disk that won't eject from my iBook G4?

    What can I do to eject a disk, that won't eject. from my iBook G4?

    If it is trying to eject and won't it may be that the slot opening
    is blocked by the protective cover. Mine was torn and after a couple of attempts
    to repair it I ended up removing it.
    If jocho's suggestion doesn't help try:
    http://support.apple.com/kb/HT2179
    Or (I've never used it but saw the link from someone here):
    http://mac.softpedia.com/progDownload/Force-Eject-Download-34780.html
    Good Luck,
    A

  • IMac screen colour, how to show tints and shades that won't appear

    iMac screen colour, how do I show tints and shades that won't appear on screen
    I have a 2 month old imac, with a great screen. But for some reason I cant  se light shades of colour like 5% of a tint.
    yet on older macs, and a 2 year old imac, i can see them prefectly.
    Some designs have light panels with 5% colours, some a precent of a colour.
    Can anyone suggest a way to calibrate the screen, or set the screen to show all the colours n tints used as accuratley as possible.
    Advice much appreciated

    The fdisk output shows that it is a single GPT disk. Has any disk manipulation been done, like resizing or repartitioning.
    Your GPT looks correct. If you create a Hybrid MBR via gdisk and include partitions 2,3 and 4 and make 4 bootable, does Windows partition show up in Startup and as a separate volume in Finder?
    Please see https://discussions.apple.com/thread/5641066 for Hybrid MBR creation.

  • How can I eject a dvd that will not play and says "supported dish not available,  also DVD player encountered a system error  -69902

    I am unable to eject a DVD.  When I try the screen says "Supported dish not available."  Before that a DVD stopped playing and the screen said 'DVD player encountere a system error  -69902.  How can I get the DVD out?

    restart your mac while holding down on the mouse.

  • HT1338 How do I eject a dvd that may have been put in upside down by my toddler?

    How do I manually eject a DVD. It may have been put in upside down.

    Depress the mouse pad on startup. Should eject.
     Cheers, Tom

  • How do I eject a disc that won't eject

    I put a disc in and it won't eject

    Run the following command in the Terminal followed by the Enter or Return key:
    drutil eject
    It may take more than once.

  • How can I eject a disc that does not appear in the Finder?

    I put a CD into my Mac that spun and spun but never registered in the Finder or anywhere else, but now I can't eject it.  Is there a physical way to do that like there is on a PC?

    ... or press the (left) mouse button immediately after chime, and keep it until disk is ejected.

  • How do I eject a DVD?

    How do I eject a DVD that is stuck in my DVD drive slot?

    Force eject a stuck cd/dvd
    TRY THE ONES IN BOLD FIRST
    First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
    If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
    Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
    If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
    Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
    Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
    Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
    Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
    If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
    Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

  • How do I eject a dvd disk that will not eject when I highlight it and click the eject disk in finder, has anyone had this problem?

    How do I eject a dvd disk that will not eject after I have highlighted it and clicked the eject disk in finder file menu?

    Complements of Kappy:
    Try:
    1. Restart the computer and after the chime press and hold down the 
    left mouse button until the disc ejects.
    2. Press the Eject button on your keyboard.
    3. Click on the Eject button in the menubar.
    4. Press COMMAND-E.
    5. If none of the above work try this: Open the Terminal application in
    your Utilities folder. At the prompt enter or paste the following:
    /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

  • How can I solve a CD that won't eject?

    How can I solve a CD that won't eject?

    Press the mouse while your Mac is starting until the disc is ejected. If it doesn't work, hold Command and S keys while your Mac is starting, and type:
    drutil eject
    exit
    If this doesn't work, the disc is stuck and your SuperDrive has to be replaced, so take it to an Apple Store or reseller. Another option is to use an external disc drive.
    If the last step doesn't work, other steps won't work because there isn't any app using the disc

  • How do I eject a disc that is not supported by My DVD player?

    How do I eject a disc that is not supported by My DVD player? I cannot eject a disc that is currently in my computer.

    Welcome to  Discussions, francescafrommt
    If you cannot find this info by searching for "eject DVD"
    (without quotations marks) in your Mac's Finder > Help,
    the web help version is here: http://support.apple.com/kb/PH6753
    Message was edited by: EZ Jim
    Mac OSX 10.7.4

Maybe you are looking for

  • Rendering previous images in a new CMS workflow

    As an alternative process photographer, I have never bothered much with monitor calibration. However, with today's instruments being as inexpensive as they are now, I see no reason not to. However, I am concerned that by doing so all of my, pre-color

  • WDS keep existing computer name

    Hello, We have WDS up and running on a recently setup server.  Most of it is all defaults apart from the fact that we have added boot images and system images.  We have an unattend file with the %MACHINENAME% in it, but for some reason it always gene

  • Sql Server Analysis Server Filter Connection Issue

    Hi All,    I am using Sql Server Analysis Web-part and when I try to give connection to Connection I am not getting any options to give connection as below.Can any one help me how can I solve this Thanks, Quality Communication Provides Quality Work.

  • Pages will not update, I plug in my user id and password and click update and it just keeps asking for my user id and password

    I have an update for 'Pages', however, when I put in my yser ID and password and click update I get routed back to the enter user ID and password screen.  It;s just a loop each time.  Any suggestions?

  • What is "missing bundle identifier"

    Hi. I'm curious about something. If I run either of these commands from the command-line: softwareupdate --list pkgutil --pkgs I get several lines referring to packages in /Library/Receipts that say: PackageKit: * Missing bundle identifier So, my que