How do I eliminate tabs in Firfox 5?

I've just upgraded to Firefox 5. I don't like tabbed browsing and I want to eliminate the "open link in new tab" option on right click and would like to eliminate the tabs altogether. Is this possible? I'm running Vista 64 bit.

Menu > View > Show Ruler > click on the Ruler where you want them > right click on the Tab to change which kind
Peter

Similar Messages

How can I eliminate the pointless top bar, close up the spaces between bars that are wasting space and reduce the depth of the tabs so that I have the space I had before for the websites I am looking at?

I have updated to the latest form of Mozilla Firefox, and the top of the screen is altered so that it occupies far more space than it used to do, leaving far less space for what I want to look at. Why are there spaces between bars? Why are the tabs deeper than they used to be or need to be? How can I eliminate the pointless top bar which merely duplicates the information in the tab bar? Is there any way of simply restoring the previous arrangement?

Okay, I accept that this is just how it is, and there is nothing to be done about it, because no-one except me thinks that the icons and toolbars should be organised to take up minimum space in order to allocate maximum space to the page.
The crowning irony of all this is that, having updated to the latest Mozilla Firefox and consequently having this arrangement at the top of the page which I don't like, the middle of the page now comes up with its old message, 'You are not on the latest version of Firefox. Upgrade now.'
Computers are very odd. :(

On my macbook pro, how do I eliminate file automatic copying

On my macbook pro when I move a file or folder from the desktop to the hard drive, it's copied automatically. How can I eliminate that? BTW, when I move a file or folder from the HD to the desktop, it does NOT get copied. Thanks in advance for your help.

To set yahoo.com as homepag in Safari:
Choose Safari > Preferences, and then click General.
Do one of the following:
To use the page in the current Safari window or tab, click “Set to Current Page.”
To use another page, type its address in the Homepage field.
To use a blank page, delete the contents of the Homepage field so that the field is blank.
If you also want the homepage to appear whenever you open a new Safari window, choose Homepage from the “New windows open with” pop-up menu.

How can I eliminate an I-Pod Touch app?

How can I eliminate an I-Pod Touch app? I want to eliminate a few but don't want to "restore" and lose all of them. Is there any way to trash apps one at a time?

Go into itunes and delete the app then sync.
Or if you just want it off of the iphone and not out of itunes, then uncheck the app in the applications tab in itunes.
Or hold down an icon until they all "wiggle" then hit the 'x" in the corner. The app will come back when you sync unless you delete it from itunes or deselect it under applications tab.
http://manuals.info.apple.com/enUS/iPod_touch_3.0_UserGuide.pdf

How do I eliminate the "getting started with firefox" page that appears everytime I click on my home page?

Every time I click on my home page I get an additional window "Getting Started with Firefox". How do I eliminate this?
== This happened ==
Every time Firefox opened
== Immediately

See [[How to set the home page]]: Firefox supports multiple home pages separated by '|' symbols.
See also this article for more suggestions: [[Firefox has just updated tab shows each time you start Firefox]]

How can I eliminate the spell check in Firefox?

I do not want to have the spell check active when I use Firefox, how can I eliminate it?

You want to disable the spell check in forms (e.g., data entry controls like the one I'm typing in right now)? You can do this using the about:config preferences editor.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''spell''' and pause while the list is filtered
(3) Double-click '''layout.spellcheckDefault''' and change it to 0 (''zero'') and click OK.
You're done, you can close that tab.
The change should take effect the next time you reload the form.

How can I eliminate delays in one NIC when there is traffic on second NIC

Using LabVIEW TCP/IP VIs, my LV application is accessing a database though a LAN, and through a second NIC, it is controlling an instrument. The instrument is connected directly to the computer NIC with a cross-over cable. I have made a permanent route for the IP address of the instrument in the IP route table. The LAN and the instrument have different subnet numbers. Using a packet sniffer, I don't see any traffic meant for the LAN going to the NIC connected to the instrument. The OS of the computer is Windows XP and the NICs are PCI cards.
The message traffic to the instrument suffers from intermittent delays when there is traffic going to the LAN.
How can I eliminate the delays? What could be the cause of the delays? Thanks in advance for your recommendations and suggestions.

Hi LabBard,
Could you tell us a little more about the device that you are connected to? What you could try is to have a VI accessing the LAN, and a separate VI communicating with the instrument, and see how things play out.
Let us know how it goes!
Rasheel

In iWork Pages 5.1, how do I eliminate "text" in the Text Box?

In iWork Pages 5.1, how do I eliminate the word "text" which appears in the Text Box, when I've used a color filler and no words?

Select the text and delete.
If you don't want text in the box, don't use a text box ie in Shapes there are various shapes. Select one without 'T'.

How to open "All Tabs" from previously shown pages history?

Hi,
How to open "All Tabs" from previously shown pages history. I am not asking about "Reopen from last session". I am asking about how to open all tabs from previous webpage links from a past date from history, currently its allowing me to select each page link manually by clicking it.
Thank you!

Select the first item you wish to open, scroll down to the last, Shift-click that one & all those between should be selected too. Double-click on them & they should all start to open... or you can copy & then drag/paste into a new or existing bookmarks folder.

How can I eliminate my first sign in that pops up? It's incorrect. My second sign in choice is the correct one.

When I'm asked to sign in I am presented with a non-valid sign in. My 2nd sign-in offering is the correct one.
How do I eliminate the first choice for sign in?

*Click the (empty) input field on the web page to open the drop down list
*Highlight an entry in the drop down list
*Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
*http://kb.mozillazine.org/Password_Manager
*https://support.mozilla.com/kb/make-firefox-remember-usernames-and-passwords

How do I eliminate delays in transmitting buffered CAN data?

My application using the PCI-CAN Series 2 card is programming automotive modules in a time-critical environment using a MSVC++ application running on Win2000. We need to send about 1.4 Mb of data to the module as quickly as possible, preferably less than 70 seconds. We are communicating with the modules at 500 Kbaud using standard frames (not extended).
Looking at the CAN bus on a scope, we see that the frames themsevles are about 240 microseconds wide, but after each frame of data, there is roughly 300 microseconds of delay.
In my C++ implementation, I have created a transmit object with a transmit queue size of 225 frames. The transmit object is configured to transmit "by call" and the period att
ribute has been set to 0. Using this configuration, I would assume that data would be sent as fast as possible. I am certain that the transmit queue is being filled faster than it can send the data out. What is producing the delays between frames, and how do I eliminate them?
(Attached file contains transmit object configuration and frame writing routine.)
Attachments:
CAN_code.cpp ‏6 KB

Hey Glenn,
If all you want to do is transmit as fast as possible, I would recommend using the network interface object rather than a CAN object. This will reduce the overhead and should improve your performance. Use a large transmit queue length on the network interface object, and try to keep the queue full. This should maximize the output of the CAN card. Other things to be aware of: what is your total bus utilization? If other devices are transmitting on the bus and the CAN card is losing arbitration, you could see a big performance hit. Also, make sure you are using the latest NI-CAN driver (2.2). There have been performance increases over older drivers (1.6 and previous specifically).
NI-CAN v2.2: http://digital.ni.com/softlib.nsf/websearch/C
98C33F3DB0459BE86256EBD004B6ED0?opendocument&node=132070_US
Hope this helps.
Scott B.
Applications Engineer
National Instruments

How I can eliminate commas in a concatenation when the records is not there

I am getting these results
Holly Eliza Congdon, 2002, Son, John Harvey , 1981, other, , ,
Peter Allen, 1966, other, Duke Beardsley , 1992, other, , ,
Nellie Wood, 2011, Son, , , , , ,
Shawn Burns, 1986, other, , , , , ,
Jay Taylor, 1977, , , , , , ,
William Travis Stoll, 2013, Son, , , , , ,
Mary Beth Cockerham, 1982, , , , , , ,
Alice Tower Knapp, 1981, , Chris Tower Zafren , 1975, other, Dana Rose Tower, 2012, other
Jahd Khalil, 2011, Son, , , , , ,
Lauren Scott, 2009, other, , , , , ,
Danielle Restuccia, 2008, other, , , , , ,
I want to be able to NOT display the , , , , , (commas) if the record have only one relative
this records has 3
Alice Tower Knapp, 1981,Mother , Chris Tower Zafren , 1975, Other, Dana Rose Tower, 2012, Other
looks fine
but this one:
Jahd Khalil, 2011, Son, , , , , ,      LEG     09/20/2009 10:55:46
Only one, how I can eliminate the , , , , , ?
Here is the query:
SELECT spriden_pidm, 201090, '1', '1',
                   szcasup_relative1_name
                || ', '
                || szcasup_relative1_class
                || ', '
                || decode(szcasup_relative1_relation,'S','Siblings','O','Other','M','Mother','F','Father')
                || ', '
                || szcasup_relative2_name
                || ' , '
                || szcasup_relative2_class
                || ', '
                || decode(szcasup_relative2_relation,'S','Siblings','O','Other','M','Mother','F','Father')
                || ', '
                || szcasup_relative3_name
                || ', '
                || szcasup_relative3_class
                || ', '
                ||decode(szcasup_relative3_relation,'S','Siblings','O','Other','M','Mother','F','Father'),
                'LEG', SYSDATE
           FROM saturn_midd.szcasup, saturn.spriden
          WHERE spriden_ntyp_code = 'CAPP'
            AND szcasup_common_appl_id = spriden_id
            AND szcasup_relative1_name IS NOT NULLEdited by: peace4all on Sep 20, 2009 8:18 AM
Edited by: peace4all on Sep 20, 2009 8:18 AM

Maybe, but if there are trailing blanks
SELECT REGEXP_REPLACE('Jahd Khalil , 2011 , Son , , , , , , LEG 09/20/2009 10:55:46',' ,', '') FROM DUAL;
you need to take care of that first:
Jahd Khalil 2011 Son LEG 09/20/2009 10:55:46 <-- no commas at all!
1 row selected.
I guess there are many ways, and the old REPLACE is more than capable.
WITH dummydata AS (SELECT   'A' one,
                            'B' two,
                            NULL three,
                            'D' four
                     FROM   DUAL)
SELECT   one || ', ' || two || ', ' || three || ', ' || four record
FROM   dummydata
UNION ALL
SELECT   REPLACE (record, ', ,', ',') record
FROM   (SELECT   one || ', ' || two || ', ' || three || ', ' || four record
            FROM   dummydata)
UNION ALL
SELECT      one
         || CASE WHEN two IS NULL THEN '' ELSE ', ' END
         || two
         || CASE WHEN three IS NULL THEN '' ELSE ', ' END
         || three
         || CASE WHEN four IS NULL THEN '' ELSE ', ' END
         || four
            record
FROM   dummydata

How do I eliminate duplicate email accounts on my Mac?

how do I eliminate duplicate email accounts on my Mac?

Go to Mail Preferences/Accounts. Select the Account you want to remove and hit the minus button.

I have three Safari icons. Two in the dock and one on the desktop. How do I eliminate them?

I have three Safari icons. Two in the dock and one on the desktop. How do I eliminate them?
One from the dock and the one on the desktop.

nezzer wrote:
the desktop item will not delete or "move to trash"
In Finder, select the item. Choose File > Get Info (or do ⌘I). Look under General > Kind. Does it read "Alias" or does it read "Application (Intel)"?
If the latter, then it is likely that you're not allowed to delete because it's actually open. Quit Safari. Check if there is an item called Safari in your </Applications> folder. (In Finder, you can get directly to the Applications folder using ⇧⌘A -- that's Shift-Command-A.) Check if it's an application. If it is, then you have an unneeded copy of Safari. You can delete the one on your Desktop. If there isn't, them move the one on the Desktop to the Applications folder -- that's where it belongs.
If you're new to the Mac, consult
Mac 101
<http://www.apple.com/support/mac101/>
If you're coming in from the Dark Side, consult
Switch 101: On Windows, I used to...
<http://support.apple.com/kb/HT2514>

How do I eliminate the space above a spry menu bar?

I made a table, set the CellPad and CellSpace to 0, and set
the width to 800 pixels. Then, I inserted an image (with a width of
800 pixels) into the table, and set the V and H of the image to 0,
and aligned the image to the top. Then, I copied a spry menu bar
(with a width of 800 pixels) above the table and pasted it in the
table underneath the image. There is a vertical space of 16 pixels
between the image and the spry menu bar. How do I eliminate this
vertical gap?

The Spry Updater is at:
http://labs.adobe.com/technologies/spry/home.html
If there is a spacing issue it is hard to tell without the
code. By default the Spry menu bar has 0 for margin and padding.
Make sure there is not a <p> tag within the table because the
<p> tag has an inherit padding/margin to it and could be
causing issues. The image and Spry should just be within the
<td> </td> without any <p> tags inside.

How do I eliminate tabs in Firfox 5?

Similar Messages

Maybe you are looking for