How do i eliminate the pop up that appears acroos the top of the toolbar at bottom of screen. it extends all the way across screen

the pop up does not appear all the time but sporatically. i am using firefox 3.6 and windows 7

Do a malware check with some malware scanning programs on the Windows computer. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Similar Messages

How do I eliminate adware pop ups that happen indiscriminately?

How do I eliminate adware pop ups that happen indiscriminately?

Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(125678)

I double-click on event to see all the photos in that event displayed, but all I get is 1 large photo on the edit page. To see the photos in that event, I have to scroll. Need to be able to work with all the photos in that event, not one at a time.

I double-click on event to see all the photos in that event displayed, but all I get is 1 large photo on the edit page. To see the photos in that event, I have to scroll. Need to be able to work with all the photos in that event, not one at a time.

Maybe you need to adjust the zoom slider in the lower left corner of the window?
Regards
Léonie

TS4268 I still have "Waiting for Activation" while trying to activate iMessage on the iphone, noting that it was working normally and stopped working suddenly, as well I had done all the mentioned steps.. what should I do else?

I still have "Waiting for Activation" while trying to activate iMessage on the iphone, noting that it was working normally and stopped working suddenly, as well I had done all the mentioned steps.. what should I do else?

Define "mentioned steps."
See this:
iOS: Troubleshooting FaceTime and iMessage activation

How do i fix the following message that appears when i open my computer :- Apple Sync Notifier.exe Entry Point not found the procedure entry point sqlite3_wal_check point chould not be located in the dynamic link library SQLite3.dll

Apple Sync Notifies,exe.Entry point not found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have uninstalled Itunes 10.4 shut down and installed Itunes 10.4 and still get this message on opening? How do i fix this problem?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

I had to manually download the new version of itunes.. via tools, it gave me 4 items to download and i did not download all 4 compenants. Does anyone know how to get back to the pop up that contains tools so i can redownlaod all of them.

I lost my old iphone and have a new 5s.. i need to sync to itunes. i had to donwload manually via tools but i didnt download all four files. now when i plug my phone into itunes it says there is an error bc i didnt download all the files. so when i go into itunes now and check for updates it says its up to date. the problem is with the phone support file i didnt download.
Does anyone know how to get back to the pop up that has the music player update and itunes update bc this is the only place i have seen "tools" to be able to manually update all four files....
***IF i completely uninstall itunes and reinstall will it still have all my songs, photos, apps etc... bc i need to sync my new phone to get all my stuff back

this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

How do i get rid of the pop ups that are constantly popping up on my mac. Everytime i search for anything on google an ad for mac keeper comes up and every time i access Netflix another stream of ads pop up... Do i have a virus HELPPPPPP

How do i get rid of the pop ups that are constantly popping up on my mac. Everytime i search for anything on google an ad for mac keeper comes up and every time i access Netflix another stream of ads pop up... Do i have a virus HELPPPPPP

You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How do I get rid of the pop ups that ask to store space on my computer

How do I get rid of the pop ups that ask to store space on my computer?
How do I get rid of the
pop ups that ask to store space on my computer?

Set it permanently with the Flash Player Settings Manager.

How to remove the UPK inscription that appears in browser title

Hello!
how to remove the UPK inscription that appears in browser title (the browser tab). I want to leave only the module name appearing.
thank you

Hi,
I haven't tried, but have a look at the toc.html - you will find this in the data folder under the Publishing Content --> PlayerPackage.
I think that the tag you are looking for is <title></title>. Pop something inbetween and see if that sorts your issue out?
Eg <title>TESTING</title>.
You should find this close to the top of the html document.
Hope it works for you.
Regards,
Greig

Clip for trailer won't load, regardless of the size the error message keeps popping up, "That clip is not long enough. Choose a longer clip for this part of the trailer."

Clip for trailer won't load, regardless of the size the error message keeps popping up, "That clip is not long enough. Choose a longer clip for this part of the trailer."

I got it out!
Here is how.
None of the Apple-suggested ways worked. However, before totally giving up I started Roxio Popcorn and pressed the big eject button on it. It came out effortlessly!
So, I thought "Weird..."
I put the CD back in and reproduced my original problem. I got it out just as easily using Roxio Popcorn Eject feature.
So, I then thought "Maybe it is the disk?" There is nothing wrong with the disk as far as I can tell. It is perfectly round, has a smooth label-side surface. It is not even a label, it is a standard software install disk you buy in stores.
I inserted a different disk. The mini mounted it, I browsed it, and then ejected it by dragging it to trash. Worked fine.
I tried a few other disks.
The drive seems to work fine.
Maybe that CD is cursed, I dunno. I tried that disk in my PowerBook and it works fine there.
Who knows ?
I am still backing up my hard drive as I type this message in case I need to take it to the store.

TS1387 this is the pop up that comes up when i plug in my phone "itunes could not connect to this iphone. Could not allocate a resource" what should i do?

The pop up that comes up as soon as i plug my iphone into my mac is 'itunes could not connect to this iphone. could not allocate resource" what should i do?

HOW TO FIX CANNOT ALLOCATE A RESOURCE ERROR!!!
I found a fix that worked for me after failing with all the others:
IF your computer has an old cydia app called Wi-Fi Sync (you'll recognize it on your toolbar as a black silhouette of an iphone that NEVER goes away), then this is probably your main culprit. Simple fix.
1. Goto your hard drive in the finder
2. Goto Library
3. Goto Launch Daemons
4. Throw this in the trash: com.ghughes.wifisync.root.plist
5. Goto Library
6. Goto Application Support
7. Throw this in the trash: Wi-Fi Sync (it's an entire folder).
8. Restart.
9. Thank me.
Peace and Love, Peace and LOVE!

How can I change the Apple ID that appears on my iPod Touch? It's not the correct ID.

Somehow the email address that appears as my Apple ID when opening my iPod Touch (5th gen) is not my correct email address/Apple ID. How can I change my Apple ID withing my Touch so I can access apps?

You might have to transfer purchases to your account. If its signed in on a different account. Or,
1. Go to iTunes on your iPod.
2. Click music and scroll down to the bottom on your iPod.
3. It should show the apple ID that's signed in, and press it and choose sign out.
4. Then click sign in and it should work.
Hope this helps.

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

1. Use the mouse to select the field and then press the space bar.
2. A null string is the same as zero. What is the result for division by zero?

How do you edit the template image that appears at the top only in portrait mode?

I am using a customized version of the iBooks Author template which has the space image. I have replaced the images for the book cover, chapter and section. But I noticed that when you rotate the ipad to view the entire TOC, the original space image is still there. How can I edit the template image that appears at the top of the Table of Contents only when you rotate the ipad in portrait view?

I just tried w/that template - switched to Portrait mode...tapped once to select that image....cut - gone. Switched to Landscape...not there. Back to portrait...still gone.
What process did you use?
Can you repeat your issue with a fresh book?

How to view the settings of the sequence (info that appears when you first open sequence)?

Hi I would like to ask how to view the current settings of the sequence i am already working in, the same information that appears when you first open a new sequence
eg.
General
Editing mode: QuickTime DV PAL
Timebase: 25.00fps
Video Settings
Frame size: 720h 576v (1.4587)
Frame rate: 25.00 frames/second
Pixel Aspect Ratio: D1/DV PAL Widescreen 16:9 (1.4587)
Fields: Lower Field First
Audio Settings
Sample rate: 48000 samples/second
Default Sequence
Total video tracks: 3
Master track type: Stereo
Audio Tracks:
Audio 1: Standard
Audio 2: Standard
Audio 3: Standard
I have forgotten which setting I chose for my current sequence and have tried to look under project settings and also sequence settings
but the info that you see when you first open a new sequence doesn't show, especially if the editing mode is PAL or NTSC etc.
How can I find out this information that my current sequence is on?
Thanks

Thanks for your reply
Is there a way to see what preset I chose when i first chose the sequence? As under 'sequence settings' i don't see this info.
e.g
DV PAL "Widescreen 48kHz"
As i do not remember and fear it may ruin the HD video I am currently editing.
Thanks

How do i eliminate the pop up that appears acroos the top of the toolbar at bottom of screen. it extends all the way across screen

Similar Messages

Maybe you are looking for