How do I email and letter with a picture if I want it to send as one piece, with no attachment? Please help
How do I send an email with a picture from pages and have it show up with the picture still intact where I have it inserted in the letter? I do not want it to go as an attachment.
Hi Carol,
I've read the rule of the commas for modules, but not for tags ... so thought maybe this is why is not working ... but again, I'm just trying to figure it out.
I'm still confusing about when and how use modules and tags properly.
I've found this short guide for TAGS that says literaly:
"Note: Tags are not transferrable and cannot be shared across all modules. Use the specific tags listed with each module as shown below: "
http://kb.worldsecuresystems.com/134/bc_1342.html?bc-partner
You may access through your BC aacount ... search by "Tags - Quick Reference" ... this is a little different that the one from ADOBE site.
You'll see that the tags can be customizable by modules and not the way you are doing.
HOWEVER, take a look at another short guide that might give you another options ... I'm gonna try this too.
This is at http://forums.adobe.com/docs/DOC-2721 .... scroll down until STEP 4 and see some customizations for Product Tags
I have a similar case like yours .... I want to show discounts and previous prices only on Sale items ... like I do at http://tesonline02.businesscatalyst.com/outerwear/avatar ... and hide all these for regular items.
Haven't found a clear tutorial, neither the responses are completly satisfactory... someone told me use the tag_sale and the rest through CSS ... but ... how??? ... this is so frustrating
.. have you found a good tutorial?
I'm trying to find a response for that ... keep you posted so you may apply it in your case.
Regards!!
Eva
Similar Messages
-
i need to buy an iphone from NY store and let FEDEX ship it to me here in EGYPT , would any one give me a feedback please
Thanks All , But i was asking if i bought it online and let apple leave the i phone at NY store , FEDEX will go to the mentioned store and get it
-
I have attempted to upgrade os4 to os7. At the end, it threw an error that i had to turn off "Find my iphone" on my phone, which seems to be impossible at that stage as i could not access beyond the upgrade screen.
I thin chose to set up as new iphone, but icloud has taken an old expired email address for which i do not know the password. icloud will not recognise my current itunes email and password, so i now have os7 but am unable to restore from my itunes back up.
Desperately need help please... Any help appreciated
ThankyouIf you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support. -
Email photos with info attached - please help
I have iphoto '09 8.1.2 (424). I want to send photos to my photography teacher with the info attached ( ISO, f-stop, etc.) Is this possible; what is the process? When I press option + command + i, I can see the info, but I don't know how to attach this info to the email. The photos go, but he info does not.
The info is not attached
The EXIF and IPTC data is part of your photo and is included when you send the photo. To see it you have to use a photo application
I suspect your teacher is not using a photo application to view the EXIF data
You can export the photo to the desktop checking the boxes to include everything and then use a program like simple EXIF viewer to look at the EXIF data prior to sending
LN -
I saw a software update in general settings so i let it downloaded.. it took hours and now the screen with apple sign appears and going but the phone is not turning on.. iphone 4
Coincidentally I have had the same problem and I am also on Reliance network. I learnt the lesson in an expensive way (Read at Rs.17/min as this is the ISD rate of Reliance for calling to USA). I did mnp (mobile number portability, you oldie!) from Airtel to Reliance. So I had the inactive nano sim of Airtel. I took out the Reliance sim and inserted the Airtel sim into my iPhone 5s. By the time it was serching for the network, I quickly navigated to settings>phone and turned that damned dial assit off. That's it. Now when I inserted the Reliance sim and dialled the toll free numbers it was working perfectly, means free of cost. But I still wonder how come Reliance does not send the post call charge notification after the ISD calls? I had to call 198 to know about the balance deduction.
-
HELP PLEEEEEASE
- You can always redownload apps amd some other iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Try here to get the iPod working again. The pocess may result in erasing the iPod. But you may have a hardware problem and may not get it working. -
How do I reset my iCloud old inaccessible email and password with my new iTunes email and password currently working on a different device? Thanks for any suggestions ,
TThat's the problem. I've tried to delete the current icloud account but in order to that you need to put in the old password which I don't have so it kicks me out.
-
I haven't get any receipt of purchases since mid January 2014. How can I contact and let the itune fix this? (I live in Thailand, not available to call or find local support.)
Has the ISP modems and routers been power cycled then tested again?
Possible ISP connection issues or LinksysSmartWiFi.com service outage maybe...
Are FW versions on all routers up to date?
To safely update FW, I recommend doing the following: Download the FW file from the support site first.
Disable the auto update feature on the router. <If this was on, possible someting was updated recently. I recommend leaving this OFF.
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way. -
How to get gui_download and gui_upload with popup filename?
how to get gui_download and gui_upload with popup filename?
Here is a short example.
report zrich_0003 .
data: ifiletab type filetable.
data: xfiletab like line of ifiletab.
data: xstring type string.
data: rc type i.
data: itab type table of string.
data: xtab type string.
start-of-selection.
call method cl_gui_frontend_services=>file_open_dialog
changing
file_table = ifiletab
rc = rc.
read table ifiletab into xfiletab index 1.
xstring = xfiletab-filename.
check not xstring is initial.
call method cl_gui_frontend_services=>gui_upload
exporting
filename = xstring
changing
data_tab = itab.
loop at itab into xtab.
write:/ xtab.
endloop.
Regards,
Rich Heilman -
How to create database and table with GUI?
How to create database and table with GUI?
for linux can do that?
or have only way to create table by use sql*plus.
everyone please help me.
thanksgo to www.orasoft.org
here is a gui tool.
null -
How to pass username and password with the portal url
i want to access portal from my web site. i have created username and password fields in my web page. when submited , my portal page should open. so how to pass username and password with the portal url.
This is not straightforward; but it is doable.
First tell us about your portal version; portal 10.1.4 has a slightly different method of doing it and the pre-10g portals were completely different animals.
And if you are in AS Rel 2, then the most important document for you would probably be the following:
[Creating Deployment Specific Pages| http://download-west.oracle.com/docs/cd/B14099_19/idmanage.1012/b14078/custom.htm#i1015535]
You might want to use it in conjunction with some metalink notes about your portal version and such a login page.
hope that helps!
AMN -
How can I authenticate and authorize with Web Service on ESB ?
Hello,
I want to authenticate and authorize client with Web Service published
by HTTP/SOAP BC.
Simply if it is an Web Service as J2EE application, I will use
Basic Authentication with JAX-RPC and Realm.
But I think that Web Service published by HTTP/SOAP BC is not belong
to J2EE Application. Threre is no place to describe security role mapping
(like web.xml).
JBI 1.0 the section "5.5.1.1.3 Normalized Message Properties" comments
JAAS Subject is given in the NM Properties. Really in this package
com.sun.jbi.internal.security.*
implements JAAS autentication and authorization (at JaasAuthenticator).
But I can't see how to configure my Service to use this.
How can I authenticate and authorize with Web Service on ESB ?
I referred to the resources.
Mutual Authentication for Web Services: A Live Example
http://developers.sun.com/prodtech/appserver/reference/techart/mutual_auth.html
XML and Web Services Security
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security7.html
JAAS Authentication Tutorial
http://java.sun.com/j2se/1.4.2/docs/guide/security/jaas/tutorials/GeneralAcnOnly.html
Thanks,
Takurou
- environment ---------------------------------------------
OpenESB : Project Open ESB Starter Kit
AppServer : Sun Java Systems Application Server 9.0 PE
OS : Windows XP
I don't assume to use SSL (if It's necessary I will try).
User information is stored in a LDAP Server.
-----------------------------------------------------------Hello,
I read this resource.
SecurityDesign
http://www.glassfishwiki.org/jbiwiki/Wiki.jsp?page=SecurityDesign
Then I think [non-ssl and ssl/tls and so on] securing by basic authentication is ongoing feature at this time.
But I can't see well why this page comments 'HTTP over SSL, TLS'.
HTTP/SOAP Binding Component Overview
http://download.java.net/general/open-esb/docs/jbi-components/httpsoap-bc.html
Does BC support only "SSL server authentication" ?
Doesn't BC support "SSL client authentication" by username/password ?
Thanks,
Takurou -
Anyone knows how to export ROLES and SYNONYMS with exp command?
Anyone knows how to export ROLES and SYNONYMS with exp/imp commands?
Help is needed. Thanks.Hi,
Pls. post this query in RDBMS forum since Portal export import forum does not handle this.
Thanks,
~Kirit. -
How to use audio and mic with multipoint server with out it crashing on you
how to use audio and mic with multipoint server with out it crashing on you when i use them to make calls thru my station (zero client) at the same time it crashes on me and i need to restart the multipoint is there a setting i may have mist that enable's
them to work at the same time and if posible can i use a non USB deviceLook for "Single Sign-on Using Kerberos in Java" in google or on Sun's web site. Maybe this paper will help you.
Claude -
Hi All.
How to end/terminate and assignment with end dated entered by user Apps R12.1?
when i try to end or terminate and assignemnt the sysdate is begin registered for effective_end date.
any help is reaaly greatly appriciated
thanks and regards
SoniHi Soni,
What is the end date you want to enter as. Are you talking about 31-Dec-4712. If not, please change the sytem effective date (calendar icon on the oracle menu) to the date you want to terminate and follow the termination process.
Thanks,
Avinash
Maybe you are looking for
-
Employment status mismatches in loan report
Hi, I have just joined in a support project. Need some guidance to solve a issue. The employee's loan report was taken from a Adhoc Query and it was found that the employment status is "Active" for the left employees. Pls let me know how to rectify t
-
Error in Accessing Virsa Firefighter
Hello Friends, I have installed Virsa FF 620_47 & assigned all roles Like administrator,FF & Owner.I have Done all the Configuration part & When i click on LOG ON Its shows the below error.I have updated the virsa support pack to Latest 10.I cannot s
-
Aperture 2 won't recognize Canon G10 CR2 RAW files
The Canon G10 just came out and I got one!! But Aperture will not recognize the CR2 files that it makes. Any idea how to make this work?
-
Hi APPLE! I have one question, Why does my iPod Touch 5-th generation WiFi is not working, When an iPod is in sleep position It appeared after the update iOS seven!! Please tell me how to fix it!!
-
Calander and time help important documents showing up here
hi, when i click to see the calander, time so on and it comes up somehow a important document shows up as well, how can i delete this from the clock, calander area? thanks