How do I enable ACL on an external unit in Mavericks?

I have an external hard disk via FW 800 on a Mac Mini Server running Mavericks. I can not enter any settings in the ACL because every time I get an error message saying that I can not enter anything in the ACL because the ACL is not enabled on the unit.
How do I enable ACL on an external drive in Mavericks?
Regards
Jonas Möller Nielsen

The problem is solved.

Similar Messages

How do I enable ownership on my external hard drive backup volume so I can copy it to a new external hard drive?

I just got a replacement external hard drive from LaCie. And, I have an older smalller LaCie external back up hard drive that I want to copy the information to the new one. But when I drag the old backup files folder to new one I get this message:The backup can’t be copied because the backup volume doesn’t have ownership enabled. How do I resolve this?

Try this:
Open the Terminal in your Utilities folder. Enter the following at the prompt:
sudo chown root:admin
Put a space after "root:admin" then drag the Desktop icon of the new drive into the Terminal window. Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen. Press RETURN again.

How do I save emails to an external drive in Mavericks?

The title pretty much says it all....

Hi. Thanks for the information. I did follow your advice, but I do not have a Mail & Mail downloads file in my (my name) Library folder. There is one in the Guest folder, but all it does when I click on it is come up with Calculating Size, and stops there. There is also no Mail folder in the Shared file. Do you have any other guess where the Mail folder could be?
Thanks again!

I have my photos on an eternal USB connected drive. I am trying to import them to PSE. The "Copy on Import" button is greyed out. How can I enable it so I can disconnect the external drive?.

The "Copy on Import" button is greyed out. How can I enable it so I can disconnect the external drive?.

"Copy" is normally used when connecting a camera or card reader.
Simply copy or move folders from your external drive to your computer hard drive, then from the Organizer menu click:
File >> Get Photos & Videos >> From Files & Folders
Then navigate to the new location on your internal hard drive.

How do I enable the Move Option When Importing (It's Greyed Out)

Bonjour,
I am trying to figure out why Aperture 2 does not ask to delete photos from camera (Canon SD950 IS) after import or why the "move" option is 'greyed' out. I have searched the forums here and have only seen people offer advice why this is not good. Not to be an A##, but I don't want advice. I need an answer to my question. How do I enable this functionality? I know that it is technically possible as the simple app "Image Capture" that comes with Leopard does exactly this.(Imports then Deletes from my camera) It's just that Aperture cost too much money in my opinion to force one to use an external app to do what you want done, especially since it is not a difficult function to perform as evidenced by aforementioned app in Leopard. TIA.
Hardware: 17' Glossy HiRes Mac Book Pro 3.1 Intel Core 2 Duo 2.4 Ghz 4GB Ram
OS: Mac OS X 10.5.3 All updates applied
App: Aperture 2.1
A bientot,
William.

Please don't take the following as a flame...
<quote>The move option is grayed out when importing from a card to save you from yourself. At least that's what I've always assumed.</quote>
That's a bit draconian don't you think? Why have the option greyed out if you don't want the user to be able to do this. It's kind of like saying hahah, this is possible to do, but, you, the user, are a moron. Why even place the option on the page in the first place.
<quote>It just happens to be a bug that few on this forum care to see fixed because most of us feel that using it is unwise due to the danger of lost images and corrupted cards.</quote>
Again, why put it on page as an option if it weren't intended to be enabled in a plist somewhere for those who wish to be 'unwise.'
My logic is as follows: If Apple provides software that is more accessible to the 'unwashed masses' (because it's included with Leopard ie. Image Capture) and it deletes images directly from the camera, then why would a professional package (Aperture) limit the so called 'professional' from designing and using his/her own workflow governed by their own experience. Which could include first a backup to dvd or other device of your choice (keyword here: CHOICE) THEN import images and delete directly from the camera. Logically this is completely BACKWARDS, the app available to the 'masses'(Image Capture) should NOT let the user delete images directly from the camera and the 'professional' app (Aperture) should allow more flexibility for the advanced user who understands the implications of his/her work flow and adjusts accordingly.
Besides, And I quote myself "I have searched the forums here and have only seen people offer advice why this is not good. Not to be an A##, but I don't want advice. I need an answer to my question. How do I enable this functionality?"
Therefore, respectfully, your answer is: non sequitur.
Best Regards

How do I Enable Crud and other properties in ListViewWebPart programmatically

In SharePoint (SharePoint Designer) 2010, to use a custom list in different sites, we used the resource to export the to site gallery. So the list became a list web part where I could use all the available resource list created on the
same site (examples: list settings, crud, views ...)
We need to provide the same functionality in 2013 programmatically for the user. We try ListViewWebPart class to use, but the resources of crud on the list were not available.
I Would like to how do I enable crud and other properties in ListViewWebPart or if there is another class that does it.
Thanks in advance

Try below:
http://www.dotnetcodesg.com/Article/UploadFile/2/216/CRUD%20%28Create%20Read%20Update%20Delete%29%20Operations%20on%20a%20SharePoint%20List%20programmatically.aspx
usingSystem;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using Microsoft.SharePoint;
namespace SharePoint__CRUD_Operations_on_a_List
{   publicpartialclass Form1
: Form   {
public
Form1()   {
InitializeComponent();
private voidForm1_Load(object
sender, EventArgs e)
BindAllRecords();
private void BindAllRecords()
  using
(SPSite site = newSPSite("http://localhost:7000"))
  using
(SPWeb web = site.OpenWeb())   {
SPList list = web.Lists["MyContacts"];
SPListItemCollection items
= list.Items; cmbItemId.DataSource = items.GetDataTable();
cmbItemId.DisplayMember =
"Id";
cmbItemId.ValueMember =
"Id";
private void btnAllItems_Click(object
sender, EventArgs e)   {
GetAllItems(0);
private void btn_Search_Click(object
sender, EventArgs e)
using (SPSite
site = newSPSite("http://localhost:7000"))
using (SPWeb
web = site.OpenWeb())
SPList list
= web.Lists["MyContacts"]; SPListItemCollection items
= list.Items; foreach(SPListItemlistItemin
items)   {
if (listItem["ID"].ToString()
== cmbItemId.SelectedValue.ToString())   {
textBoxTitle.Text = (string)listItem["Title"].ToString();
textBoxName.Text = listItem["Name"].ToString();
textBoxAddress.Text = listItem["Address"].ToString();
textBoxContactNo.Text = listItem["ContactNo"].ToString();
textBoxCountry.Text = listItem["Country"].ToString();
lblErrorMsg.Text =
"Search Result";
lblErrorMsg.Visible =
true;
DataView dv = items.GetDataTable().DefaultView;
dv.RowFilter="ID="
+ cmbItemId.SelectedValue; dataGridViewAllItems.DataSource = dv;
private void btn_AddItem_Click(object
sender, EventArgs e)
using (SPSite
site = newSPSite("http://localhost:7000"))
using (SPWeb
web = site.OpenWeb())   {
web.AllowUnsafeUpdates =
true;
SPList list
= web.Lists["MyContacts"]; SPListItem Item
= list.Items.Add(); Item["Title"]
= textBoxTitle.Text; Item["Name"]
= textBoxName.Text; Item["Address"]
= textBoxAddress.Text; Item["ContactNo"]
= textBoxContactNo.Text; Item["Country"]
= textBoxCountry.Text; textBoxTitle.Text =
textBoxName.Text =
textBoxAddress.Text =
textBoxContactNo.Text =
textBoxCountry.Text =
Item.Update();
web.AllowUnsafeUpdates =
false;
lblErrorMsg.Text =
"Item Added Successfully...";
lblErrorMsg.Visible =
false;
GetAllItems(0);
private void GetAllItems(
intItemID)
using(SPSite
site = newSPSite("http://localhost:7000"))
using (SPWeb
web = site.OpenWeb())   {
SPList list
= web.Lists["MyContacts"]; SPListItemCollection items
= list.Items; if (ItemID == 0)
dataGridViewAllItems.DataSource = items.GetDataTable();
else
DataView dv = items.GetDataTable().DefaultView;
dv.RowFilter =
"ID=" + cmbItemId.SelectedValue;
dataGridViewAllItems.DataSource = dv;
  private void btn_UpdateItem_Click(object
sender, EventArgs e) {
  using (SPSite
site = newSPSite("http://localhost:7000"))
using
(SPWeb web = site.OpenWeb()) {
web.AllowUnsafeUpdates = true;
SPList list
= web.Lists["MyContacts"]; SPListItem
Item = list.GetItemById(Convert.ToInt32(cmbItemId.SelectedValue));
Item["Title"]
= textBoxTitle.Text; Item["Name"]
= textBoxName.Text; Item["Address"]
= textBoxAddress.Text; Item["ContactNo"]
= textBoxContactNo.Text; Item["Country"]
= textBoxCountry.Text; textBoxTitle.Text =
textBoxName.Text =
textBoxAddress.Text =
textBoxContactNo.Text =
textBoxCountry.Text =
Item.Update();
web.AllowUnsafeUpdates =
false;
lblErrorMsg.Text =
"Item Updated Successfully...";
lblErrorMsg.Visible =
true;
GetAllItems(Convert.ToInt32(cmbItemId.SelectedValue));
private void btnDeleteItem_Click(object
sender, EventArgs e) {
  using
(SPSite site = newSPSite("http://localhost:7000"))
  using
(SPWeb web = site.OpenWeb()) {
web.AllowUnsafeUpdates =
true;
  SPList
list = web.Lists["MyContacts"];   SPListItem
Item = list.GetItemById(Convert.ToInt32(cmbItemId.SelectedValue));
Item.Delete();
web.AllowUnsafeUpdates = false;
lblErrorMsg.Text =
"Item Deleted Successfully...";
lblErrorMsg.Visible =
true;
BindAllRecords();
GetAllItems(0);
http://blogs.msdn.com/b/vssharepointtoolsblog/archive/2010/05/05/walkthrough-of-enabling-crud-for-sharepoint-2010-external-lists-using-visual-studio-2010.aspx
If this helped you resolve your issue, please mark it Answered

Enable ACL on XSAN without using OD. Is it possible?

I've tried using fsaclctl - but no results. How to enable ACL on XSAN?

Are you using xSAN 2 or 1.4? With v2, you can stop the volume and open it's settings, checking ACL's. Oddly, I'm curious to why ACL's would make your permissions management easier. It generally in my experience has made it far more difficult to deal with permissions from different macs when enabled since there are additional "layers" of users above those assigned by XSAN directly.
If you have any OSX Server product running on the XSAN, you can start up a Directory Service on it. Just make sure all your XSAN clients and controllers have that machine's IP or Servername (xserve1.local) designated in the the app found in Applications/Utilities/Directory Utility. While it isn't maybe best practice to have the Metadata controller doubling as an OD server, it isn't really a huge deal if your SAN is small. Any performance hits on the SAN would be minimal compared to the huge task of keeping up with all your mac's users and settings all the time.
Making your own simple OD server would work as long as your XSAN isn't part of a larger network. My company has Active Directory for the main LAN and the addition of a simple but separate OD for xSAN users has caused many problems when those same macs write to the LAN volumes.

How do I enable the FM receiver on my iPhone 6

how do I enable the FM receiver on my iPhone 6

The FM receiver is there, as its part of the Hardware. but its inaccessible, and not connected to anything. Even if you could enable it, the lack of an external antenna would render it useless.
There are groups that will open the Phone (voiding the warranty in the process) and enable the Fm antenna and maybe even attach it to the external casing, but as has been amply mentioned already in another thread, FM requires a pretty long antenna (i.e wired earphones) to work even remotely well.
So there would have to be some major reworking of the iPhones internals to even begin to get it to work.
You can read Lawrence Finch's excellent explanation on the subject here:
FM radio for iPhone!, FM radio for iPhone!
In short, its not something easily accomplished, nor is the end result really worth all the trouble.

Step by Step how we can connect SAP CRM to External system..

Hi Experts,
I want to know the informations of how we can connect sap CRM to External system, and what are the settings we have to do ,to enable XIF adapter..
This is very imp requirement kindly give support.., how we can connect to other system..through XIF Adapter..??
IS it possible to create ZBAPI in SAP CRM..?
Thankz in Advance
Regards
J Sarathi

Hi,
- Xif adapters and service process the BDOC messages.
- adapters for inbound and outbounfd processing.
-it will forward the messages from the inbound queues to the control component.
-BDOC is a business document where the flow of data to and from the CRM system takes place.
-Bdoc is a container that contain business data
- it describes the hierarchial structure of the business data.
-you can also create custom specific BDOC types,
-BDOC's as a data container to process business objects as one unit and this avoid having to transport several individual tables.
Bdoc types are found in BDOC repositry.
Bdoc types have two part
Header- consist of one single segment so-caooed control segment
Body - consist of one or more data segment
Idoc having three types of data:
control record
Data record
status record
hope it will useful.
thanks
Hemant ghiya

After a Lion clean install, how do I retrieve my data from external back-up? Following Apple advice for use of Migration Assistant did not work creating similar issues leading to clean install.

After a Lion clean install, how do I retrieve my data from external hard drive?
Following Apple advice I used Migration Assistant which crashed new system twice which is why I had to clean install Lion in the first place.
Is there a sure way of doing it?
I have only a few programs that I will have to install myself and that should not be a problem.
I just want my data, music and photos back where I can use them.

Time machine backups. I went to migration assistant a few hours ago and limited my selection to "users", no need for applications, settings and other files. Stuff started moving over at a fast pace but has now seemed to stall.
I will let it run overnight as there are lots of songs and photos as well as a few movies.
If that does not work, then I will go into TM and try restore. I have restored some things in the past such a mail files and it has worked well.
The Apple fellow at the store told me to go right into TM, he may have had a point. I'll get it eventually.

HT2518 How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

Hi, did you try iTunes>File>Import?

I can't figure out how to save my events onto an external hardrive

I have been looking at the event libraries and everywhere to figure out how to save my files onto an external hardrive. I currently use FCPX to edit Call of Duty Montages for people as my job so I need this to work. I don't know what I'm doing wrong and I really need storage.

In the Copy Files Into: field there is a pop up that allows you select where your media is copied to.
Looking at the above screen shot if I want files to be copied to my External LaCie drive I just tick that one.
Firstly you will have to create at least one Library on the External to send it there.
There is the CHOOSE option that allows you to navigate anywhere on the the system to manually select a destination.
Al

I have a Verizon IPhone 4 and i can't figure out how to get my ringtones from an app to my iTunes account, it doesn't have a tab for Ringtones! I have tried unplugging it and checking if would show up but it didn't, how do you enable the ringtone folder?

I have a verizon IPhone and i can't figure out how to get my ringtones from the app to iTunes, my account doesn't have a ringtone section in the liRingtone Folder?brary, how do you enable the ringtone folder?

Edit > Preferences. Select the check box for Ringtones, this will add them to the listing in iTunes.
Not sure that really answers your question though.

How can I enable embedded pl/sql gateway to run on port 80

I have a new 11G install on OEL 4.0, database created. I would like to be
able to access the instance using the pl/sql gateway. Works fine with
port 8080, the default. How to I enable it to run on port 80?
I found this statement in the following docuementation:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb22pro.htm#ADXDB2500
Using HTTP(S) on Nonstandard Ports
By default, HTTP listens on a nonstandard, unprotected port: 8080. To use HTTP(S) on
the standard port, such as 80, your DBA must chown the TNS listener to setuid ROOT
rather than setuid ORACLE, and configure the port number in the Oracle XML DB
configuration file /xdbconfig.xml.I have root priviledges on the box.
I've tried setting the listener file permissions:
chown root:dba /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
chmod 6775 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
Also put root in the dba group.
The permissions turn out like this:
-rwsr-sr-x 1 root dba 830854 Jun 17 21:04 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
I stopped the listener, bounced the database, and started the listener again.
But it still shows the process being owned by oracle:
oracle 29682 1 0 21:08 ? 00:00:00 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr LISTENER -inherit
Changing the port is easy:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
8080 2100
At this point, I can access the apex home page with the following url:
http://hostname:8080/apex/f?p=4550:10:1454849288245548
I can than change it to port 80:
SYS>begin
dbms_xdb.sethttpport('80');
dbms_xdb.setftpport('2100');
end;
2 3 4 5
PL/SQL procedure successfully completed.
SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
80 2100
When I try to access apex with the following url:
http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
I get the following:
Failed to Connect
Firefox can't establish a connection to the server at hostname.com.
Though the site seems valid, the browser was unable to establish a connection.
* Could the site be temporarily unavailable? Try again later.
* Are you unable to browse other sites? Check the computer's network connection.
* Is your computer or network protected by a firewall or proxy? Incorrect settings
* can interfere with Web browsing.I can set the port. Just can't talk to it.
This is the entry from the listener log:
<msg time='2008-07-03T15:40:09.741-06:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='hostname'
host_addr='xxx.xxx.xxx.xxx'>
<txt>TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
Linux Error: 13: Permission denied
</txt>
</msg>
So this looks like an permissions problem. But where? I posted
this on the apex forum here:
Re: How can I enable embedded pl/sql gateway to run on port 80
They suggested asking here.

No, that thread did not provide the information that I need. Some more data:
I have the port set to 8080:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
8080 2100
At this point, I can access the apex home page with the following url:
http://hostname:8080/apex/f?p=4550:10:1454849288245548
I can than change it to port 80:
SYS>begin
dbms_xdb.sethttpport('80');
dbms_xdb.setftpport('2100');
end;
2 3 4 5
PL/SQL procedure successfully completed.
SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
80 2100
When I try to access apex with the following url:
http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
I get the following:
Failed to Connect
Firefox can't establish a connection to the server at hostname.com.
Though the site seems valid, the browser was unable to establish a connection.
* Could the site be temporarily unavailable? Try again later.
* Are you unable to browse other sites? Check the computer's network connection.
* Is your computer or network protected by a firewall or proxy? Incorrect settings can interfere with Web browsing.
I can set the port. Just can't talk to it.

How do I enable an add-on in Firefox safe mode?

So recently I have had a problem with Firefox crashing all the time and found out it was an add-on that was causing the problem.
I have tried opening Firefox in safe-mode to disable add-ons but they are already disabled, so I want to know how to enable an add-on and then to permanently disable it so Firefox will open normally again. . .
I have already tried to permanently disable all add-ons by using the Firefox options box but nothing happens after I click on the 'make changes and restart firefox' button. After I click it nothing happens and it remains frozen. ([https://support.mozilla.com/en-US/kb/Safe%20Mode Safe mode Window])
So to make things short, how do I enable an add-on in Firefox safe mode?

In Firefox 4 and later [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and also disables hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
You should still see a Disable button or Enable button (if you disabled them all) in the extension Manager (Tools > Add-ons > Extensions) if you start Firefox in Save mode.
*https://support.mozilla.com/kb/Safe+Mode

How do I enable ACL on an external unit in Mavericks?

Similar Messages

Maybe you are looking for