How do I enable Integrated Graphics on Win 7, w/ bootcamp 5?

Since I bought a 2012 MBP(15-inch, 2.3hz I7, gt 650m 512mb vram), and installed Windows 7, via Bootcamp, I've been having problems with temperature.
I've searched the web a little bit about it, made some tests, and most of it is about Intel Turbo Boost excessive heat and mainly about the dedicated graphics.
Under OS X 10.8.5 or 10.9(recently), i run games using limiters to disable both, the turbo boost (limiting at 2.3ghz) and the graphics to Integrated only. Games such as, Path of Exile, Team Fortress 2, League of Legends, Dota 2, runs under these conditions very smoothly, around 65 fps, at 75-80 oC with both coolers at 4700 rpm, what is OK, since I'm playing medium-heavy duty games. BUT, not all my games are compatible with mac, so I installed Windows.
Under Windows, I was not able to find how to disable the dedicated graphics, and because of that, the same games runs (with the turbo boost disabled only) at over 90 oC (coolers at full speed, 6200rpm both), and the GPU keep droping FPS, since it underclocks itself, due to overheat.
my Question is : HOW DO I DISABLE THE DEDICATED GRAPHICS, AND ENABLE THE INTEGRATED ONES????
many games runs well with intel HD 4000, nvidia 650m is not necessary! but I cant limit my computer resources.
Thx for your attention.

ok then,
do you know if there is an alternative way, such as underclocking permanently the GPU, just as I did with the CPU?
at least it would stabilize the temperatures around 80.. or sth

Similar Messages

How can enable switchable graphics in Windows 8.1 (Bootcamp)

So I just dropped $3,000 on a high end (late 2013) 15" rMBP and immediately installed Windows 8, and then 8.1, through Bootcamp. I need Windows for a lot of engineering programs, as well as occasional gaming. I bought a MacBook because I prefer OSX for programming - I love Ubuntu, but my previous laptop had driver issues (ironically enough, also due to the graphics card) that would cause it to overheat and only give me about 45 minutes of battery life.
After using it for a little, I realized that the MacBook was VERY hot. I closed all of the power intensive applications and proceeded to browse reddit on low brightness and power saving settings to let it cool down, but it did not cool down much. I shut it down, and turned it on about 15 minutes later, when it had successfully cooled down. I realized that just being booted into Windows caused the laptop to get unreasonably warm - I'm assuming that it's because I have the Nvidia GeForce GT 750M graphics card in it. I can not seem to find an option to enable power saving graphics.
Is there any way to use the integrated Intel graphics rather than the discrete card? Not being able to run Windows reasonably well would really make me regret this purchase, especially when I could have bought a different laptop for much less and installed a Linux distro on it.
Any help is appreciated.

Sorry, but I think the above post is bad advice. It's unlikely to be a fan issue as these are generally controlled by firmware. If your laptop is getting very hot in Windows with only minimal and light use then that suggests a power management issue.
The first thing you'll want to do is check that your Power Management settings are not set to "High Performance". A lot of people select this option thinking it gives them the most out of their computer and hardware purchase without realising what it does and that it comes with significant issues and tradeoffs.
What the High Performance setting does is disable CPU throttling, forcing the CPU to run at its maximum speed constantly (on all cores) and draw its maximum power load, even when not required. This causes the laptop to heat up very hot very quickly even if you aren't doing much, while simultaneously killing battery life. If you found a way to replicate this behaviour in OS X (and turn graphics switching off) you'd find the laptop would get equally hot and fans would ramp up to maximum speed just to try to keep things cool. If you hear your fans spinning at maximum then that is evidence that fan control is working.
It's a very unnatural behaviour and there are almost no situations where you ever need to use it. Microsoft should really make an effort to hide it and make it harder to access. High performance sounds nice and "Why wouldn't I want my laptop to run with high performance" is what most people think. Of course, Microsoft isn't very good at understanding what people think.
For most purposes "Balanced" is the Power management setting you'll want to use and this more closely reflects what Apple uses in OS X. Failing this, it could be that whatever software you're using is very badly coded for power management, but this is less likely and unlikely to cause the severe heating issue you described.
Finally, there's no need to regret your purchase. It's an amazing laptop and the best way to run Windows in my opinion. The only thing missing I can think of is switchable graphics driver support but this isn't anywhere near as severe a problem as what you've described.

Z77a g43 | i5 2500k | Disable integrated graphics

As the title states how do I disable integrated graphics from the bios on my z77a g43 motherboard running a 2500k. Finally got a dedicated video card Radeon HD 7870

Don't want it warming up the CPU (Overclocker a few degrees can make a difference ) and to get optimal performance out of my Radeon 7870.
And yeah the Radeon is already up and running.
So I'm guessing there's no way of completely disabling it from bios?

How to disable iNTEGRATED graphics On the Y40? in bios

i want to fully disable the integrated graphics through bios. in the switchable graphics and uma, either use both or integrated basicly. how do i change it so its dedicated instead of integrated?

Good luck, but i dont recommend third party softwares to control the hardware of a laptop (especially the ones that have no reviews)
Chrome should work fine on an integrated chip, heck I could play games on the integrated chip back in 2006. I think your issue may be loss of performance in Battery mode.

How do I make Visual Studio 2013 use my dedicated graphics card instead of integrated graphics on my laptop?

I am using Alienware 13 as a portable workstation. I do game development on Unreal Engine 4 using Visual Studio 2013. The issue I am having is that when I want to debug codes in Visual Studio 2013, it launches Unreal Engine 4 through the debugger and uses
the integrated graphics card rather than my dedicated graphics card, which is an nVida Geforce 860M.
When I wanted to change the settings in the NVidia Control Panel, I see this:
The drop-down menu is grayed out, so I cannot select to change the graphics card to my dedicated card.
What should I do? How do I make it so that Visual Studio uses my dedicated card? Thanks in advance.

Hi tom_mai78101,
Thank you for posting in the MSDN forum.
It seems that it is not the correct forum for this issue, since this forum is to discuss Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
As you said that you want to change the setting so that Visual Studio uses your dedicated card in NVidia Control Panel, since this NVidia Control Panel is third-party tool, we are not support it. So please post this issue this issue directly
to this NVidia Control Panel Official website:
http://www.nvidia.com/object/nvidia-communities.html , you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to tell if my laptop integrated graphics uses UMA or discrete memory?

Hello,
I'm looking to buy a replacement heatsink/fan assembly for my DV6-6117DX laptop as the ball bearing on my fan is dieing. Using the service manual I've narrowed it down to two parts:
650848-001 (For use only with computer models equipped with an AMD A8, A6, or A4 processor and a graphics subsystem with discrete memory)
650847-001 (For use only with computer models equipped with an AMD A8, A6, or A4 processor and a graphics subsystem with UMA memory)
I'm just not sure whether my laptop's integrated graphics uses discrete memory or UMA memory. The processor is an AMD Quad-Core A8-3500M with integrated AMD Radeon HD 6620G Discrete-Class Graphics. This is copied from the HP specs page. Does the "discrete-class graphics" imply that it uses discrete memory?
Thanks for any help!
-J

JunoMalone wrote:
In my original post, I've already narrowed it down to one of two parts. My CPU is the AMD A8, my GPU is the AMD 6620G. I just don't know how to tell if my graphics use discrete memory or UMA memory, which will decide between the two heatsink/fan parts.
Put this way if you have AMD video that is the discrete video and you most likely can't upgrade that video if that what your thinking of doing. It should have 1-2gigs of Video RAM that what it usualy comes with but that doesn't qualify it for a Gaming laptop if that is what your looking do to. Gaming laptops cost upwards to 2000US for decent game play and those Video are the higher end video chipset. And if you want to know if you have shared memory with the video look at your UEFI or Bios and look for shared video memory and you will have more insight into the video itself.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

How do you turn off the integrated graphics on the msi k8mm-v motherboard?

i recently bought a 3d fusion nvidia 6200 video card(agp) and it will not let me install it, untill i turn off the integrated graphics on the motherboard.
any suggestions
Thanks,
Daniel

MSI K8mm-v motherboard
VT8237R chipset
AMD Athlon 2800+ processor, at 1.60 ghz
512 MB RAM
3DFuzion Nvidia 6200 Video Card
maxator 11.9gb hard drive
dvd rom drive
raidmax 12v 380 W PSU
3.3v(26a) 5v(29a) 12v(11a)

How to find out Integrated weblogic server version

hi experts,
am using jdev11.1.1.5.0
i h'd big doubt ;)
how to find out Integrated weblogic server version
i think am using weblogic10.1.3. but am not sure?
so how can i found out.
this my log. but i dont see any info about version.
*** Using port 7101 ***
"C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\DevSuiteHome_1\jdk\jre\bin\classic;C:\DevSuiteHome_1\jdk\jre\bin;C:\DevSuiteHome_1\jdk\jre\bin\client;C:\DevSuiteHome_1\jlib;C:\DevSuiteHome_1\bin;C:\DevSuiteHome_1\jre\1.4.2\bin\client;C:\DevSuiteHome_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and   *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console        *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client   -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Duser.timezone="+05:30" -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\gmds   -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 17, 2012 5:50:39 AM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.>
<Feb 17, 2012 5:50:40 AM GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Feb 17, 2012 5:50:42 AM GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00220. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Feb 17, 2012 5:50:48 AM GMT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log00102. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log.>
<Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<MessageLocalizationHelper> <getLocalizedMessage> The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.
<Feb 17, 2012 5:51:02 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application GeneralLedger is not versioned.>
<Feb 17, 2012 5:51:07 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Rapppdf is not versioned.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00208. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Feb 17, 2012 5:51:27 AM GMT> <Warning> <Server> <BEA-002611> <Hostname "rmsys0061", maps to multiple IP addresses: 192.168.0.161, 192.168.2.161>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.2.161:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.0.161:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 51640 ms.
IntegratedWebLogicServer started.
[Running application frmtesting on Server Instance IntegratedWebLogicServer...]
[11:21:30 AM] ---- Deployment started. ----
[11:21:30 AM] Target platform is (Weblogic 10.3).
[11:21:31 AM] Retrieving existing application information
[11:21:31 AM] Running dependency analysis...
[11:21:31 AM] Deploying 2 profiles...
[11:21:32 AM] Wrote Web Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting\ViewControllerWebApp.war
[11:21:32 AM] Wrote Enterprise Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting
[11:21:32 AM] Deploying Application...
<Feb 17, 2012 5:51:33 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application frmtesting is not versioned.>
[11:21:40 AM] Application Deployed Successfully.
[11:21:40 AM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[11:21:40 AM] http://192.168.0.161:7101/frmtesting-ViewController-context-root
[11:21:40 AM] Elapsed time for deployment: 11 seconds
[11:21:40 AM] ---- Deployment finished. ----
Run startup time: 10812 ms.
[Application frmtesting deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/frmtesting-ViewController-context-root/faces/untitled6.jspxhttp://127.0.0.1:7101/console/login/LoginForm.jsp. it stated as weblogicserver 11g admin console
At the botton(copy right section) 10.3.5.0

Hi,
There is one more method,i know
Set the JAVA_HOME and PATH
then execute the
$WL_HOME\wlserver_10.3\server\bin>setWLSEnv.cmd
Go to directory which contains weblogic.jar ($WL_HOME\server\lib) and run below command
$WL_HOME\wlserver_10.3\server\lib>java -cp weblogic.jar weblogic.version
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255
Hope this will be helpful,
Regards
Fabian

Virtual XP Mode Asks for Password after "Could not enable Integration features

With Win7 64 bit professional as the main OS I installed the VM XP Mode several years ago and occasionally when XP is booting up, it asks for a password for the username XPM User. I have never setup passwords for Win 7 or for XP so that the PC simply boots
up into first the Win 7 and then I can choose to boot straight into XP if I wish. On the occasions that XP asks for a password, I have simply closed down and rebooted successfully. Over the past two days I have received a dialog box telling me that the integration
features could not be enabled and on closing that dialog box, I am being asked for a password - which does not exist! As a result, I cannot access the personal finance application that I 've been using for the past 15 years. This is the only application I
run on XP and is the reason the virtual machine is in use.
I read through the existing posts on "could not enable integration features" and none seem to offer much of a solution to me. There is no .vsv file.
How do I access the files that are stored for use with XP?
How can I create a password that XP will accept?

Hi,
When finding the .vsv file, have you unchecked the show hidden files option? Go Control Panel | Folder Options | View and uncheck the option to "hide extensions of known file types" and also enable showing hidden files and folders. The file type is
Virtual Machine Saved State. If it exists, please delete it and restart the XPmode.
Regarding the password issue, have you checked those two threads?
the integration features could not be enabled
Removed XP Mode password in Windows 7 and now cant login
The suggestions is to enter safe mode and make a password reset OR reinstall the intergration features. Please take a check with more suggestions offerred by the folks here.
If the above is not working, then we may consider to backup important files with XPM VHD file via Disk management, and then reinstall Windows XP mode.
Reference:
Creating Virtual Hard Disks
Best regards
Michael Shao
TechNet Community Support

[GT780DXR] Integrated graphics eneable.

HI guys, I'm have msi GT780DXR and am desperately looking for help.
These days it has broken my GTX570M and I would like to enable the integrated graphics to at least use the laptop. Currently my only options to use the laptop, is connect remotely. I can not do anything with out windows. (the screen does not go, hdmi does not work.)
After 18 hours of searching online. The only solution I see is to get a bios configured with the integrated graphics of the cpu activated.
Please .. I can not buy a new graphics because I live in the Canary Islands and not sent here. I want to at least have a laptop but can not play with it.
Please, help me.
Raycol.

Quote from: raycol on 07-July-14, 05:32:00
Hi again guys. Im talk with Svet and he build me a new bios edited with a integrated bios eneable.(IGD Multi monitor eneable)
Im can now look a intel hd eneable. But my laptop screen is black. Hdmi and vga some. I'm crying because I can not find a solution to this problem.
All connectors are plugged. I have reviewed 2 times. But still black screen notebook.
1 Question. How can you see the status of integrated GPU and use DDU if your screen is black?? Do you put back Nvidia GPU for this purpose?
Anyway. Your laptop does not have Optimus. Which means it does not use integrated GPU. Perhaps SVET could tryt o enable it in this options and perhaps another one
BUT in case you get a black screen with BIOS with such settings, you will have to reset BIOS. Which means you should remember what buttons to press and its exact order: Del, then F11 in 3-4 seconds etc, etc.

Motherboard MSI Z77 - Integrated Graphics.

Hi,
i just tried to configure the Integrated graphics on my system.
I've consulted the manual, and configured the following:
. Virtu Technology : D-MODE
. Initiate graphics adapter : IGD
. IGD Multi Monitor : Disable.
When i've saved the bios, the system dont post, the screen doesn't receive any signal, and i get the Led Debug Code 62.
The problem is that I’ve tried this configuration upon buying the board, and crashed BIOS A. I was running on Bios B, that now also crashed : My Bad, all the way. At the time, should have corrected Bios A.
The only thin I have, is a copy of the BIOS on a usb pen.
How can I resolve this?
My Rig:
Motherboard MSI Z77 MPower
Intel Core i7-3770K 3.5GHz 8MB Sk1155
PSU LC Hyperion 700W
Kingston HyperX DDR3-1600Mhz 4x4GB
SSD OCZ Agility 3 180GB

Probably co-incidence
Quote
Don't understand how enabling Virtu Lucid in the BIOS with OC Genie 'ON' could have such a result.. Has MSI tested this??
I am sure they tested it, most likely the board was defective and whatever switch was flipped by this change allowed the damage to occur.

Intel's integrated graphics chipsets

Im considering about intel's integrated graphics chipsets. I have dedicated ati radeon mobility hd5650 graphics card. My processor is 1st generation intel core i5. All intel processors have built-in graphics chipsets like (intel hd2000, or lower configuration)??? If they are how can i disable my ati card and start using intel's built-in graphics chipset?

I have the same setup (first generation i5, Radeon 5650). Here is how I do it:
1. Mount debugfs in /etc/fstab (to get the vgaswitcheroo directory needed later)
2. Black list the radeon driver in /etc/modprobe.d/modprobe.conf
3. If using an xorg.conf file, make sure the intel driver is used
4. (Using KDE) I have a script in ~/.kde4/Autostart called ati-off that contains the following
sudo modprobe radeon
sudo sh -c "echo OFF > /sys/kernel/debug/vgaswitcheroo/switch"
The last step is necessary because if the radeon card is not enabled and shut off with VGA switcheroo, it will still consume power and make the laptop temperature rise.
I don't know if all these steps are currently necessary -- I set it up like this probably 18 months ago and haven't changed it since.

Only Use Integrated Graphics When Using Battery

Can someone tell me how I can set-up my 2011 MBP 2.3GHz i7 so it only uses Integrated graphics card when I am using the battery? I just upgraded to Lion 10.7.1 and my barrery life stinks. I downloaded and am using gfxCardStatus and set it to Integrated graphics only for battery power. When I launch Twitter and other apps (Angry Birds), it still switches to Discrete graphics. I also set my Energy Saver Preferences to Automatic Graphics switching to help preseve the battery.
Thanks

First, go to iMovie/Preferences and enable the Advanced Tools.
Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

T410 with integrated graphics - DVI output not working on Mini Dock 3 (4337)

I tried connecting my external monitor to the DVI output of the Mini Dock and it did not work. I have since connected it with no issus to the VGA output.
However, I want to use the digital (DVI) connection for my monitor........how can i fix this issue?
NOTE: I have a T410 with the integrated graphics so my laptop screen does not display while docked (I keep the lid closed).

Hi MarkinIt,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with no Display when connected to docking station on your ThinkPad T410.
Have you checked updating the Intel graphic driver from Lenovo support site?
Please provide the current Graphic driver version showing in device manager.
Is the system having Windows 7 or Windows 8 OS?
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How do I enable an add-on in Firefox safe mode?

So recently I have had a problem with Firefox crashing all the time and found out it was an add-on that was causing the problem.
I have tried opening Firefox in safe-mode to disable add-ons but they are already disabled, so I want to know how to enable an add-on and then to permanently disable it so Firefox will open normally again. . .
I have already tried to permanently disable all add-ons by using the Firefox options box but nothing happens after I click on the 'make changes and restart firefox' button. After I click it nothing happens and it remains frozen. ([https://support.mozilla.com/en-US/kb/Safe%20Mode Safe mode Window])
So to make things short, how do I enable an add-on in Firefox safe mode?

In Firefox 4 and later [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and also disables hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
You should still see a Disable button or Enable button (if you disabled them all) in the extension Manager (Tools > Add-ons > Extensions) if you start Firefox in Save mode.
*https://support.mozilla.com/kb/Safe+Mode

How do I enable Integrated Graphics on Win 7, w/ bootcamp 5?

Similar Messages

Maybe you are looking for