How do i enable my iphone when i forgot my passcode?

I am locked out of my phone and cannot enable it because i forgot my passcode. is there a way to bypass this?

You have to restore it using iTunes. Plug the phone into a computer with iTunes loaded on it, and launch iTunes. Select the iPod under DEVICES, then click Restore. Once it is complete, your data can be restored from your most recent backup.

Similar Messages

  • HT1212 how do i diable my ipod when i forgot the passcode

    how do i disable my ipodtouch when i forgot the passcode.

    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up    
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    

  • HT201302 how to unlock iphone when you forgot the passcode

    how to unlock iphone when you forgot the passcode

    Back up and then restore the phone in iTunes on the last computer it was synced with, as outlined in this article: http://support.apple.com/kb/HT1212.

  • How can i access my iphone when i forgot my password

    i need to access my phone its URGENT!!

    You can't access your iPhone if you forgot your passcode. That's the purpose of a passcode. It wouldn't provide very good security if it was easily bypassed.
    See here: http://support.apple.com/kb/ht1212 for what to do.

  • HT1212 how do i unlock my ipad2 when i forgot my passcode

    How to unlock an iPad2 when I forgot the passcode and the instructions in the manual is not working?

    How to unlock an iPad2 when I forgot the passcode and the instructions in the manual is not working?

  • HT1212 how do reset to factory setting when i forgot the passcode

    Can someone please tell how to factory reset my ipod touch 1st gen as i have forgotten the passcode and want to sell it..

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

  • How do you enable your iPhone when it is disabled

    I just got the iphone 5s and was setting up my phone i did the passcode option and wasnt paying attention press the code in and locked myself out of it. I thought I knew it tried it several more times and locked myself out, I think for good. I dont even have the option on  putting in the passcode anymore and it tells me to connect it to itunes but i cannot, because it says put in the passcode in order to access itunes.

    http://support.apple.com/kb/HT1212

  • HT4623 how to unlock my iphone when i forgot my passcode?

    the truth is thta you have to connect it to itunes and plug it but it might not work becuase you havent conformed it but go on youtube and it will give you the respond

    Do as the manual tells you to do.  Restore the iphone

  • How do I unlock my iphone when I forgot my pasword?

    Please help me by answering as soon as possible. Thank you.

    Do as the manual says to do and restore your iphone

  • How do you unlock your iphone if you forgot your passcode and blocked it?

    I have overguessed my passcode and now cant get on my phone?

    I offered you help which included much more than just saying you're fishy, and I said this sounds fishy and it certainly does with or without your so called "facts", which certainly can't be proven based on what you say alone.
    If you use the same computer that has been used for syncing with your iPhone, it shouldn't make any difference that you changed the passcode out of the blue last night that can' be remembered.
    If not, you must place the iPhone into recovery mode. If successful, this will required restoring your iPhone with iTunes. If done on a computer not used for syncing your iPhone, you won't be able to restore from the backup, none of the photos on your iPhone that were transferred from the computer used for syncing your iPhone will be available, your contacts will not be available unless you are accessing an email account that includes over the air syncing for contacts, and none of your iTunes content will be available to be re-transferred to your iPhone - no music, movies, tv shows, or apps.

  • HT201304 how to reset phone when you forgot the passcode

    How can I reset my iphone when I forgot the passcode in resrictions.

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • HT4759 ow do you restore the iphone when there is a passcode and you do not remember it??

    how do you restore the iPhone when there is a passcode on it and u for get the passcode?? help me please

    You need to follow the steps in this knowledge base article, may take more than one attempt for it to work.

  • HT4623 how do I unlock my iphone if i forgot passcode?

    How do I unlock my iphone if I forgot my passcode?

    Follow the directions here:
    http://support.apple.com/kb/ht1212

  • HT201317 how do I unlock my phone when I forget the passcode?

    How do I unlock my phone when I forgot the passcode?

    Please see http://support.apple.com/kb/HT1212

  • How to respond on my iPhone when it disabled?

    How to respond on my iPhone when it disabled?

    You don't.  It's disabled.  You need to re-enable it.  What have you done to re-enable it?

Maybe you are looking for

  • Can't get rid of background image of toolbar buttons

    I am just a front-end developer and responsible for the front-end look of an ADF application that we are creating: We are using jDeveloper 11.1.1.4.0 (and we cannot upgrade due to being told no...so I cannot USE the skin editor which when I tried to

  • Focus problem in 1.4_2 after JPopupMenu show

    Hi, there: I have an application, with a JTextField when that textfield gained focus, a popup menu is shown, and when it lost focus, the popup menu is hidden. My focus listener class is listed below, where popup is JPopupMenu, and function displayPop

  • Java 6 plug-in

    I have been updating Java 6 with update 1,2,3,5,7,11 and J2SE runtime environment 5.0 update 6,9,10. They are all listed in the add/remove program section of xp. Are they all being used when I use java or simply occupying space on the HD? Could I uni

  • Export multiple queries to Excel

    I am trying to export multiple queries to an excel file. How can i run multiple queries all in one go and then export them to an excel file?

  • Copy G/L Account

    How can I copy all of G/L accounts from one company code to another company code?