How do I enable network capabillities that have been disabled on printer?

HP Officejet Pro 8600 all-in-one CN578AWindows XPMessaage: Built-in network capabilities have been disabled.Contact network administrator or person who set up the printer.Cannot connect printer to wireless network.

Hi,;I still get the same error message:Messaage: Built-in network capabilities have been disabled. Contact network administrator or person who set up the printer. I Cannot connect printer to wireless network. i tried uninstalling and reinstalling the printer and disconnecting the router. Please help

Similar Messages

How do I enable my ipad that has been disabled?

Hi...my friend tried too many incorrect passcodes on my ipad and now it is disabled. I have seen some answers here that say to sync it back to to the laptop but I have never previously sync'd my ipad to my laptop before so that didn't work because the 2 devices have never been connected. Any other suggestions on how to fix please? I had never actually set up a passcode but my friend who has never used an iphone or ipad before has somehow set the passcode whilst she was thinking that she was trying codes to unlock it...and has no idea what she set it to!

Link it up to your com or if all else fails , wish you good luck.

How to check the sales orders that have been created with an Rebate Agreeme

Dear Experts,
Do you know how to check the sales orders that have been created with an Rebate Agreements?
Thanks!!

Hi Hoo Laa,
I have one way but little lengthy.
Rebate condition always appears in the billing document.
So 1st you extract the sales order list from Table VBAK.
once you have the sales order list then you can put your order list in Table VBFA --> Extract the billing document list.
Now put that list in the table VBRK.
In VBRK you will get the "Doc. condition" --> put that doc condition in table KONV with your rebate condition type.
It will show the result.
Later, through VLOOKUP you can identify in which order you have given rebate to your customer.
Already said, Little lengthy
Regards,
MT

How do i retrieve deleted items that have been deleted by mistake

how do i retrieve deleted items that have been deleted by mistake ?

If they’re not in a backup, try using a data recovery product such as the ones listed here. Don't write anything else to the drive until the files are recovered or you choose not to recover them.
(116899)

HT5622 how do i retrieve text messages that have been deleted

How do I retrieve text messages that have been deleted? How much do I Have to pay to get them back? I meant to delete one message that was sent and I accidentally deleted all of precious pictures

those text message should be in your backup, if you backup on a regular basis. restore your phone to that backup.

How do i delete the songs that have been downloaded onto my iphone?

how do i delete the songs that have been downloaded onto my iphone?

doesn't work... it still shows i hv all the songs in my iphone...
i've deleted all the songs... emptied the Recycle Bin too...
i used to be able to just clear all the music away and sync in a whole new set of songs..
but i can't do it now...
sad...
any help available as i do not want to have to do it manually one by one unchecking the songs...

HT1212 how do u restore an iPod that has been disabled and has never been connected to the computer

How do i restore an ipod that has been disabled and has never been conected to itunes

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How do I delete my pics that have been synced to my iPad?

How do I delete my pics from my iPad that have been synced from my MacBook?

You are not getting the same screen as you used to sync them to your iPad ? e.g. if you select the iPad on the left-hand sidebar of your Mac's iTunes (option-command-S enables the sidebar) then on the right-hand side of the screen the last tab should be Photos :
If the tab isn't showing then is your iTunes screen wide enough for the tabs to fit ?
To delete all synced photos try selecting an empty folder on that tab and sync that.

HT1212 how can i restore a ipod that has been disabled with a different computer

how can i restore a ipod touch that has been disabled with a different computer

Restore it in Recovery Mode: http://support.apple.com/kb/HT1808

When sending e-mail messages to a mail-enabled public folder that have been replicated from old Exchange Server 2000/2003/2007, Exchange Server 2010 environment mails are rejected with NDR.

Hi, I would like to share with you issue that I’ve solved regarding mail-enabled PF that migrated from Exchange 2000/2003/2007 to 2010, I’ve searched & contacted my MVP leader – there’s no official KB regarding this issue right
now, so I’m posting here in order to share this among others.
Note: There’s article(s) that talked about PF replication from Exch2000/2003/2007 to 2010 – this is the same issue as well.
Symptoms
E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
“#< #5.2.0 smtp;554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn’t found. ObjectNotFoundException: The Active Directory
user wasn’t found.> #SMTP#”
Sometimes Exchange Server 2010 is documented as well Event ID 1020 on the Event Viewer with this information:
“Log Name: Application
Source: MSExchange Store Driver
Event ID: 1020
Level: Error
Description:
The store driver couldn’t deliver the public folder replication message "Hierarchy ([email protected])" because the following error occurred: The Active Directory user wasn't found.”
Cause
In an environment where Microsoft Exchange Server 2000 or Microsoft Exchange Server 2003 previously existed, and all those servers have been removed, there is a chance that an Administrative Group (First Administrative Group or another custom Administrative
Group) remains with a Servers container, but no servers inside it.
During replication, when the Exchange 2010 Store Driver sees the empty Servers container in Active Directory, it's expecting a System Attendant object inside the container and when it is not found the error occurs.
Resolution
To work around the issue, delete the empty Servers container. This can't be done through Exchange System Manager. Use the ADSI Edit tool to remove it using the following steps:
Warning If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows
2003 Server, Microsoft Windows Server 2008, Microsoft Exchange 2010 Server or both Windows and Exchange. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes
at your own risk.
1.
Start the ADSI Edit MMC Snap-in. Click Start, then
Run, and type adsiedit.msc, and then click OK.
2.
Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand
CN=Configuration,DC=DNSDomainName,DC=com.
3.
Expand CN=Services, and then CN=Microsoft Exchange, and then expand
CN=YourOrganizationName.
4.
You will see an empty Administrative Group. Expand the
CN=YourAdministrativeGroupName.
5.
Expand CN=Servers.
6.
Verify there are no server objects listed under the
CN=Servers container.
7.
Right click on the empty CN=Servers container and choose
Delete.
8.
Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
Applies to
Exchange Server 2010, Standard Edition
Exchange Server 2010, Enterprise Edition
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

How do you open the downloads that have been saved? I can make it to the download list but it will not let me open any of them.

When I open an email with an attachment, it downloads the attachment and saves it to my downloads. At a later time, I return to the download list and try to open it and it will not allow me to open them. How do I open my saved downloads?

If the Open or Open Containing Folder entry in the right-click context menu of a file in the Download Manager is grayed then that means that the file is no longer in that original download location. It may have been removed by cleanup software or anti-virus software if you haven't deleted the files yourself.

How do i remove email addresses that have been imported from my email account?

Im not sure how i did it but somehow i have a ton of email addresses in my contacts and I want to remove them....Is there a way to do this without have to remove them one at a time.....I hardly send anyone emails from my contact list and would love to get my list back to just people with phone numbers....
Any suggestions would be greatly appreciated!!!

Select each photo in the smart collection with the missing question mark icon. Use Cmd+Click or Shift+Click on the first and last if they are all in a consecutive block. Then click top left on the Catalog tab and choose All Photographs. Confirm from the information strip (above the filmstrip) that you are in All Photographs and the number of photos you have selected and then use the menu:
Photo >> Remove Photos From Catalog

How do I see the pictures that have been saved to my iCloud

How do I see the pictures that I've saved to my iCloud account

Welcome to the Apple Community Larry.
The iCloud.com website doesn't have the PhotoStream feature, PhotoStream is currently only for sharing photos between your photo apps on your various devices and computers.
You can see your PhotoStream photos on a mobile device in the photos app when it is logged into iCloud using your Apple ID. You can see them on a computer in iPhoto or Aperture on a Mac or your designated PhotoStream folder on a PC when the computer is logged into iCloud using your Apple ID

How can I open picture files that have been downloaded from my I Phone 4 to my Windows 8 laptop and share them?

How can I open apple picture files that I downloaded from my IPhone 4 to my windows 8.1 laptop?

ronylouis wrote:
i deleted notes fom my old iphone and surprised to see that they have been deleted from my new phone ..how can i get them back ...i dont have any backup??
Why would you be surprised? You were syncing your Notes with iCloud or a Mail Account. Synchronization means when you make a change on one device, it affects all other devices that are synched for the same purpose. Like when you delete an email (usually) it also disappears from your other devices as well.

IMovie How do you join video clips that have been split

In Imovie project, How do I join video clips that been split

Hi
And if the clips are not contiguous - Then You have to do as in all versions of iMovie from the very beginning.
• Put the clips into one new project
• Export this as full quality QuickTime movie
• Import this new merged QT-clip into Your main project
This is a way around that are very basic and used whenever more elaborated scenes are prepared - e.g. multiple text clips or when in need of adding several functions into it.
Tedious - but it always been like this - in contrast to FinalCut.
Yours Bengt W

How do I enable network capabillities that have been disabled on printer?

Similar Messages

Maybe you are looking for