How do I enable New page pop up automatically

I'm trying to launch a reading course that I.need to get done tonight but it tells me that it will open up in a new page but it's not it's asking me to enable it but I don't know how can someone please help!

Hi ChinnaDoll,
This message is a bit late and I am sorry for the late response. However for the future, if you would like to enable a pop up for a particular website you can add it to the exceptions list in desktop, but not android. To enable all pop ups with these instructions:
#Open up about:config and refer to the solution mentioned by Ralph:
[https://support.mozilla.org/en-US/questions/1027074]

Similar Messages

How to call the new page in smartforms

Hi friends,
How to call the new page in smartforms.
Thanks,
Ravi

Hi,
Create a command node and click the 'Go to new page' check box specifying the page u want to go.
You can enter your condition for which it should branch to a new page in the 'conditions' tab.
Regards
Shiva

How can I make new pages software spellcheck a selection like in appleworks?

How can I make new pages software spellcheck a selection like in appleworks?
I just installed pages a new download from apple store.
1. I cannot find any way to activate a spellcheck for a selection in a document.
2. I want to elemenate a red line under a word it doesn't like the spelling of.

Safari--open in new page--pop under?

Is there a Safari preference setting that causes new pages to load under the one currently being read instead of on top? I like the sort-of tabbed browsing, but most often, I want to read the linked page only after I've finished the page I started with. As it is now, I see something I want to look at later, click open in new page and am automatically zipped over to it, so I have to switch back to the original page, then wait for it to reload. What sane person uses the Internet the way it does now?!?
Should I submit it as a bug if there is no way to fix this?

Easterling wrote:
Is there a Safari preference setting that causes new pages to load under the one currently being read instead of on top? I like the sort-of tabbed browsing, but most often, I want to read the linked page only after I've finished the page I started with. As it is now, I see something I want to look at later, click open in new page and am automatically zipped over to it, so I have to switch back to the original page, then wait for it to reload. What sane person uses the Internet the way it does now?!?
Should I submit it as a bug if there is no way to fix this?
It's not a bug. It's how Mobile Safari works on the iPhone, iPod and iPad. I've gotten used to it, and I'm quite sane! It was annoying at first, now I don't even think about it. Remember, there's limited real estate on the iPad to implement everything we would want. It is supposed to be a stripped down version of a full powered browser, to make it load faster with less bandwidth, to make it visible on the screen, etc. I think it's a good compromise.
But if you want to make a suggestion to improve it, go to http://www.apple.com/feedback/ipad.html

How do u get New page in Smart form dynamically

How do u get New page in Smart form dynamically

page break in smart form
Re: New Page in Smart Forms
Page break inside a loop in smart form

How we can acess GOS to pop up automatically to user from workflow is our a

we plan to implement invoice verification workflow to start when an invoice is scanned and placed in holder in OAWD. So that workflow will start from then onwards with SAP archive link.
Please let us know how we can link scanner and SAP Archive link so that we can place the scanned document directly in to OAWD. how we open the image automatically when approver or AP clerk execute the workitem.
The process we want to follow is
1. Scan document and place in OAWD
2 Workflow is started based on the document type of Archive link( we want to use BKPF)
3 AP clerk receives workitem and execute it. APclerk see the transaction code FV60 to enter document and image of the scan automatically
4 AP clerk fill the document and park the document.
5 Workitem is sent to approver based on the rule specified
6 Approver execute the transaction invoice iamge is opened and sap document is displayed.
7 Approver check both image and sap docuemnt and take decision
8 Approver approves document , sap document is posted and ready for payment
9 If rejected go back to AP clerk.
Here issue is when user or approver execute the workitem ,how we can open image automatically along with sap screen.
or how we can acess GOS to pop up automatically to user from workflow is our another isssue

Hi,
It is possible to launch the stored image as soon as workitem is executed. You will need to maintain the archivelink customization to display stored document. Check the following link
[Displaying Stored Document|http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/993685446d11d189700000e8322d00/content.htm]
Hope this helps
Cheers!!!
Samanjay

OBIEE 11G - Navigation:How to open in New page/new tab.

Hi All,
When I click on a link in report it opens another report on the same page. Instead I have to open the report in a new page/new tab. Is this feature available in obiee 11g version? If yes, could you please tell me how to make it possible?
Thanks in advance,
Sunita

hi
Use Action Link...to open link in New Window
1.Go to edit Dashboard...
2.Select Action Link from Dashboard Objects.
3.Click the Action Link Properties and Type your Report Name in Link Text Box.
4.Select New Action Button and Go to Navigate to BI Content
5.Choose your Report from your path and click ok button
6.Enable Open Link in New Window(IMP) and click ok.
7.save and check your dashboard page...
thanks,
kavi
Edited by: Kavitha on Jul 12, 2011 12:11 PM
Edited by: Kavitha on Jul 12, 2011 12:12 PM

How to create a new page in SRM5.0 and return data

Hi,Everyone,
    I want to create a new page,for example:
     when user select a po item,and then we want to create a custom button at po item basic data screen,when user click the custom button,
    we want to pop up a new page for our custom logic.at the pop up page,when user complete some data selection, and then the data should return or refresh to po item.
   And now,I have a question for that:
    How can i return or refresh data(for example,the price) to po item. I have create a bsp page for our pop-up page.
Thanks.
andy

HI,Masa,
   Thanks for your reply. and it's a very useful ways.and i will consider for that way.
   But i think if there have any other way ?
   for example: i create a bsp page for our new page,and through the custom button of po basic item page. and that can realize.but how can i return data to the select item.
Thanks.
Regards,
Andy

OBIEE Guided Navigation Link - How to open in New page.

Hi,
I am using Guided navigation links in OBIEE dashboards to link some of my reports.
When i click on the Link it opens the report on the same page. Instead i have to open the report in a new page. This Option is available in 'Link OR Image' section, not in 'Guided Nav. Link' section. Please suggest me if there is any way to achieve this.
Thanks
Swami

Hi
We have the same need: from within a report we have guided navigation to a detail report, that uses the values of the record in the master report as filterparameters. When clicking a row in the master report , we should open the detail report in a new window, while leaving the master report in the dashboard open. How can we achieve this?
Swami just mentioned the Link or Image object to indicate that this possibility of choosing the same or a new window is present there, and asked where to find the same choosing option for guided navigation.
Frits

How to open a new page from a Spry Table click, with element info?

Hello, Spry experts!
This is probably simple, but I've searched for hours and can't find what I need. I'm using Dreamweaver CS4 and Spry 1.6.1 to create a simple Spry Table from an XML data set using PHP as my back end. I've used Dreamweaver's Insert->Spry->Spry Data Set to create everything, and the table is working fine. Colors, clicks, sorts, etc., are all working correctly as expected.
What I want is to be able to add a behavior such that when a table row is clicked, I can open a new page. Moreover, I want to pass a parameter from the table to the new page, like http://www.mydomain.com/newpage.php?aid=12345 or whatever.
So, for example, my table has two columns, "a_id" and "a_name", and my repeat region looks like this:
<div spry:region="xml_assignments">
<table width="500">
<tr>
<th spry:sort="a_id" class="spry_header">ID</th>
<th spry:sort="a_name" class="spry_header">Assignment</th>
</tr>
<tr spry:repeat="xml_assignments" spry:setrow="xml_assignments" spry:odd="spry_odd" spry:even="spry_even" spry:hover="spry_hover" spry:select="spry_select">
<td>{a_id}</td>
<td>{a_name}</td>
</tr>
</table>
</div>
What I want is to be able to open an entirely new URL, passing the value of the {a_id} in the selected row as a parameter to the new URL, as in something like: http://www.mydomain.com/newpage.php?aid={a_id}
So my questions are:
1. How best to apply the action to the table? Add an onclick to the tr tag? Something else?
2. How to extract the {a_id} value from the current row and pass it as a parameter to the action?
Or maybe just take another approach entirely?
I know that I can make the actual text in the table cells hyperlinks, and use them to link to the new page, which is fine. The desire here is just to make it so that the user can click "anywhere" on the table row (as they can currently do with the spry:select behavior) and have the link kick off, whether they actually click on the linked text or somewhere in the row where there is no text.
I'm sure this is obvious and simple, but I'm new to this level of Spry detail, and my brain is fried from hunting. Any guidance will be gratefully appreciated!
Glen Barney

I found the answer myself, after posting this, of course!
I changed:
<tr spry:repeat="xml_assignments" spry:setrow="xml_assignments" spry:odd="spry_odd" spry:even="spry_even" spry:hover="spry_hover" spry:select="spry_select">
to
<tr spry:repeat="xml_assignments" spry:setrow="xml_assignments" spry:odd="spry_odd" spry:even="spry_even" spry:hover="spry_hover" spry:select="spry_select" onclick="window.location.href='./newpage.php?aid={a_id}';">
Basically just added the onclick parameter...
And it all just worked!

How do I add new pages to a document and move them around?

Before I used to be able to add new pages at any point in the document.
I could also restructure the document, changing the page orede as I pleased.
I can't figure out how to do that now...
Am I missing page Layout and only using word processing or is this just the new Pages program if so FIX IT APPLE I dont like it!

Nonsense, everyone at Apple says you love it!
Peter

How to create a new page as a hyperlink to an external one?

I've been trying to solve this for like 2 hours and still haven't found the way!
When you create a new page in iWeb, it automatically adds its name into the navbar and creates a new page and folder with its content. Well, I want to create a new page that is a link to an outside webpage opening in a new tab. How do i do this? Editing the new page .html? I've tried that, but what should I write?
Anyway, hope somebody can give me a hand...
Thanx!

This may be what you're looking for:
http://discussions.apple.com/message.jspa?messageID=9105295#9105295

How do I get new pages in new tabs to automatically go the same setting as my home page? Google is my home page, and I want the opening in new tabs to default to Google also.

Whenever I open a new tab, I want the new page to open to the same setting as my Home Page (in my case, Google). Instead it takes me to Bing. Even my Home Page reverts to Bing after I've set it to Google.

The default New Tab in Firefox is a blank page and there is no built-in option to change that.
*CTRL+left-click the Home icon will open a new tab to your set home page.
**See --> http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
*This Add-on will open a new tab when clicking the new tab "+" icon (or when clicking New Tab from the menu) to whatever page you set in the options for the add-on:
**'''''New TabURL''''': https://addons.mozilla.org/en-US/firefox/addon/newtaburl/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

How to insert a new page when data don't fill in the principal page?

Hi to everybody!!
I don't know how to do this, I have, in the main window a table with a loop, the loop is this
XFORM INTO ZXFORM (where Xform is type PC408) and in line to line I put the line for example 25 to 30.
Under this table I have another table to another type of data....
The problem is that in the case the data exceed the 25 to 30 lines...where I can see this data? How can I make a new page with the exceed data and how I can retrieve?
Thanks and regards
Rebeca

Try this, it will help you to close the thread.
for displaying new page
Inside you form
/E   POS_NEWPAGE   "Element
/:   NEW-PAGE
Inside your driver program...
Calls a New Page
      CALL FUNCTION 'WRITE_FORM'
           EXPORTING
                element = 'POS_NEWPAGE'
           EXCEPTIONS
                OTHERS = 1.
Regards,
SaiRam

How to insert a new page to word document

Does anybody knows how i can insert a new page to the opened word document ?
I am searching for the documentation for the activex word functions and i have no idea where i can find it ?
I am using LabWindows CVI 8.5.

Hello Boris!
You can use the WordRpt_NewPage function to add a new page into an opened word document.
Here is some documentation about this function: http://zone.ni.com/reference/en-XX/help/370051Y-01/toolslib/functionreference/cviwordrpt_newpage/
You'll also find useful hints on how to use it in the sample program that ships with CVI: <samples>\activex\word\wordrpt.prj.
Best regards!
- Johannes

How do I enable New page pop up automatically

Similar Messages

Maybe you are looking for