How do I enable SPDIF pass through on Audigy 2 ZS Notebo

I'm trying to pass Dolby Digital from a DVD played through Cyberlink Power DVD to my home receiver. Power DVD is set to output SPDIF. It seems that the Audigy 2 ZS is doing the decoding, then passing it to my receiver as 2 channel PCM. I can't find anywhere in the documentation where I can pass through the bitstream. It's just a regular movie with a standard AC3 soundtrack. Thanks for any help.
Message Edited by acribb on <SPAN class=date_text>0-07-2006 <SPAN class=time_text>08:43 PM
Message Edited by acribb on 0-07-2006 08:50 PM

http://us.creative.com/support/kb/article.asp?l=2&sid=2929
Maybe you need to switch into Advanced Mode?
http://us.creative.com/support/kb/article.asp?l=2&sid=7460
jutapa

Similar Messages

How do I get to the screen on my Audigy 2ZS where I can enable 'SPDIF Pass-through'

I see the screen on your support page but I cannot get to this screen with my software. Do I need to download a driver or application to get this option. I have a set of Logitech Z-5500 digital speakers on my Dell XPS 600 computer. I am using the digital coax cable but I need to enable SpDIF passthrough to let the speakes decode the digital output from my sound card in order to get surroun sound from the 5. speakers.

Click on Media Source "Go", then click the "Product Settings" tab, then choose "Device Controls" and click on the "Decoder" tab.

How to enable GRE pass-through

I have a router cisco 1811 and I need enable GRE (Generic Routing Encapsulation. How I can do that?

Hi, I have my router cisco 1811 K9, with Failover and LoadBalancing... and with the NAT rules to pass through the respective ports to have Web and Telnet Access...
now I'm trying connect from an external connection, with the windows xp client VPN conection, to my office (internal LAN) Windows 2003 VPN server....
I'm already NAT the ports 1723 Tcp and 1701 Udp but doesn't work....
VPN Client(Win XP)---->Internet===>router cisco1811===>VPN Server(Win 2003-ISA Server2004)----> LAN
Note: I'm not using the cisco vpn client and cisco vpn server, only Microsoft Windows VPN client and server configuration.
Thanks a lot!

How can I have each pass through a for loop communicate with a new indicator?

Hello,
I am using 16 color boxes to indicate how 16 channels are behaving. If a color box is blue, its respective channel is running correctly, red means it has failed etc. I am continuously checking each channel using a loop, and I wanted to update the channel colors every loop. I have made an array of 16 numbers corresponding to the color I wish to have (which are blue = running, red = failed, green = completed, black = not in use). However, I cannot find a way to pull these 16 numbers out of the array and to the color boxes short of 16 index arrays connected to the color boxes.
I understand how to convert each individual number to a color, I just don't know how to use a 16 times for loop to communicate with a different color box each pass through. Is there any way to do this or should I just go for brute force?
Thank you.
Solved!
Go to Solution.

Sorry I keep making new posts. Attached is an example i wrote up. There are three cases in the disabled structure, each has a different implementation of what i belive your specs are.
Tim Elsey
LabVIEW 2010, 2012
Certified LabVIEW Architect
Attachments:
update color box.vi ‏24 KB

Howto enable spdif output through the combo ja

I have an Audigy model #sb0090
I am running Vista Home Premium
I am connecting this computer to my Dolby 5. receiver.
Creative Vista drivers are installed and reporting no errors.
On the back of the Audigy card there is a digital output jack labeled: "digital out or 3"
I purchased the Digital IO Module from:
http://us.creative.com/products/product.asp?category=&subcategory=6&product=780
When I plug it in, I don't get audio from either the coax or the optical outputs. I have enabled spdif output in the OS. I also have a daughter board model# ct4660 (from an older sound blaster li've) that I can connect to the audigy via a ribbon cable. The ct4660 also has a coax output. When I use this, the Dolby Digital output is sent to the receiver and everything works. The problem is, I don't have room in the case for the ct4660 which takes up an extra pci slot. How do I tell the card to send digital out to the "digital out or 3" output on the Audigy?
Thanks for the help...

I went out and purchased a new Audigy SE. Using the IO module, I now am able to get Dolby Digital sound from digital sources such as DVDs and ATSC television. I do not get any other sound such as Windows sounds and music. In the Audigy speaker properties on Vista, the "Digital Output Only" checkbox is not checked. How do I get all sound to output via the spdif output?

How does client certificate get passed through TMG/ISA to destination server (eg. SCCM)?

To avoid the 403.7 errors when the destination server requires certificate authentication, how does SSL bridging reverse proxy inspect the traffic for safety without breaking the certificate authentication?
I'm not asking for specific configuration steps on this. I just want an easy to understand overview on the process of how the laptop or smartphone authentication device certificate would pass through while TMG/ISA is still protecting the destination
from attacks.

I'm not sure if SSL Bridging is the same with Cert Authentication,...but...
The way it works when Bridging SSL for published SSL web sites is by the ISA having a copy of the same Cert used on the published site. You buy the cert for the Site and install it on the web server and get it set up with the site,..then export it
with the private key. Take the exported Cert and install it on the TMG and configure it into the Web Publishing Rule.
The SSL tunnel coming in terminates at the TMG,...meaning the SSL Tunnel was only between the user and the TMG (not between the user and the site as it would appear on the surface). Then the traffic is inspected or whatever would be intended to do with it.
Then a new distinct independent SSL Tunnel is created between the TMG and the SSL Site and the traffic is passed on to the site at that point. AFAIK, the Reverse Proxy only happens between the two tunnels while the traffic is unencrypted.

How do you disable postscript pass-through using Mac OSX 10.6

My Phaser 4600DN prints quite slowly when printing a PDF, a 28 page documents takes nearly 7 minutes to print. On Windows 7 PC the same document takes 6 minutes to print. If I disable Postscript Pass-Through option on the driver the 28 page documents takes two minutes to print. I need to know if there is a similar option in Mac OS 10.6.8?

andyfoster wrote:
I need to know if there is a similar option in Mac OS 10.6.8?
If, when printing to a Postscript printer, an app generates its own Postscript programme, it is possible for the printer driver to send it directly to the printer w/o any other modification; this is called Postscript pass-through. CUPS, the Mac OS X printing system, does allow for this option, but it is implemented in the printer driver, not the OS. So, whether or not disabling this option is available to you depends on the driver for your printer. Consult its docs or ask Xerox tech support.

Live! spdif pass through? h

Hi, I have a SB Li've soundcard (CT4670) and digital i/o card module. I have sky+ and I am trying to copy some programs on to my hard dri've, I can see the picture without any problem but I can not work out how to record the audio.
I have fed the SKY+ svhs into my Powercolor x800xl video card with vivo.
I thought I would be able to put the spdif cable from my Sky+ box into my sbli've digital i/o input and then a spdif connection from the digital i/o to my surround sound 5. system.
I can not hear sound - what can I do to rectify this?

Hi there,
I have the same problem and could not find an answer...
As this restriction is not mentioned in the manual or box I?ll try to get my money back and buy a Product I can use to copy my old DAT recordeings !
I can "hear" the SPDIF input from my DAT but not record ;o((
As I have seen several postings with the "SPDIF PROBLEM" I am asking myself when Creative can sup?ly an answer...
Good Luck
Bummer

801.1ab (LLDP) pass through on SRW208P?

My SRW208P is blocking all 801.1ab (LLDP) traffic. Is there a way to enable this pass through?

redbarron wrote:
How do I attach the *.cfg file to a post?
Good question.
Is there a command line interface to the switch? If not, how about posting screen shots?
-- Dan Meyer
http://www.linkedin.com/in/danielrmeyer

IPSec pass-through in IOS router

Is there any command need to enable IPSec pass-through on 2800 router?

Assuming there are no ACLs on the interfaces, no. If there are ACL's on the interface(s) then you will need to allow it through via the ACL.
HTH and please rate.

Trying to get SPDIF to work with Audigy 2... help! (I read the guide)

?I have the following miniplug/TOSlink cable purchased from Amazon:
Amazon.com: Cables To Go 2707 Velocity Toslink-to-Optical Mini Plug Digital Cable (3 Meters): Electronics: Reviews, Prices & more
I enabled SPDIF output from the Audigy 2 card as the default sound device in Windows 7. I have the miniplug end plugged into the white output of my Audigy 2. There is a sound bar next to the SPDIF output showing that there is output if I play a DVD or music. But, when I look at the TOSlink end of my cable, I see no red light AKA no signal is being output.
In the audio console, I have tried both the SPDIF passthrough and the onboard encoder options without success from either. What am I still doing wrong? Thanks guys

so what i understand is i cant connect my home theatre (optical out only) with my audigy 2 zs even i use optical to mini plug adapter?

Analog to digital, how does one actually pass through a TRV120 or TRV950E ?

I would need some technical advice on how to connect a camera with pass-through feature in between a VCR and the computer.
I am trying to copy VHS-C cassettes to the Mac via a Digital8 Sony TRV-120. I use A/V pin connector from the VCR, Firewire to the Mac. I get the VCR image on the TRV's LCD, but nothing on the Mac. iMovie says the camcorder is empty, dot. If I put a tape inside, iMovie launches the tape and I get the image from the tape. I was pretty certain that the TRV-120 had the pass-through feature, having seen it mentioned on some reviews. Is there a special manipulation to do? Or do I need the sVHS cable? (would be weird).
Otherwise, I tried the TRV950E as a converter. The only way I could make the link work through is by recording the analogue signal onto the camcorder tape. I thought it would be easier, am I missing something?
Thanks in advance for your help!
Paul

In my unnEUtered Sony TRV320E Analog to DV passthrough goes like this:
1. Take the tape out of the camcorder
2. Connect the analog device's audio and video to the camcorder's minijack, use the S-Video jack for video if the output device supports S-Video
3. Put the camcorder into VTR-mode
4. Select A/V->DV out: ON, in VTR mode's menu choices
5. Disable the info display on the the camcorder by toggling its DISPLAY button
6. Put iMovie (or other DV application) to the Camera Mode
The analog image should now appear on the camcorder's screen as well as on the iMovie's screen.
Note that if you have a tape in the camcorder, you have to put the camcorder's VTR into REC mode (you may pause the tape) but this is not advisable because it produces wear to the tape.
* Note that the SCART which comes with the European nEUtered TRV320E camcorder is Out-only.
Notice that some analog to DV passthrough converters (like the TRV320E) don't work in iMovie HD 6.0.2 like they do in iMovie 4.0.1:
http://www.sjoki.uta.fi/~shmhav/iMovieHD_6_bugs.html#analogDV

How can I see how much data passes through my Time Capsule?

I am thinking of using a cellular data plan at home. My current, rural internet provider is slow and unreliable. I use a MiFi as a backup and have 4G service which is much faster and rarely goes down. I need to see how much data is downloaded and uploaded to compare costs. All our data passes through my Time Capsule.

A similar app to what Bob mentions is peakhour.. it works on any of the newer OS.
https://itunes.apple.com/au/app/peakhour/id468946727?mt=12
It is a good app. BUT.. fat ugly BUTT.. just the same as Bob has explained, it depends on SNMP to work.. and so due to apple removing a very useful and functional protocol from its airport range you can no longer use it. Bizarre.
I strongly recommend a Netgear WNDR3800 (older model now but you can pick up one cheaply on ebay) and a 3rd party firmware called gargoyle. Apple delete my posts if I point you to it, so you will have to search yourself.
Replace your tall TC with the Netgear as the main router.. bridge the TC to it and you can continue to use its wireless and for TM backups. The advantage is that gargoyle will not only measure everyones usage, by IP, it is able to set a quota on everyone using the net and you can set that quota for hourly, daily or weekly or monthly. It will track the usage and you can see at a glance what everyone has used.
It is simple to load.. just like a standard firmware update. The interface is as clear as anyone can make it with such of lot of tools. And the actual router is powerful enough to provide excellent QoS and parental controls on top of measurements and quota.

How to create pass-through-proxy?

How do I create some kind of pass-through proxy that can listen and receive OCI, and then forward the commands to the oracle database (sometimes where the SQL is slightly altered). What is the best way to do this?
I failed to find any relevant help in the docs. :-(
Thanks in advance!

Anyone? I guess what I'm looking for is how to receive instead of just sending OCI commands, and extract the SQL from the received OCI commands/packages for possible modification/refactoring.

How to export PDF without recompressing all images (pass-through)

I have a simple two page document, each page has a background image linked to a perfectly sized jpg file from photoshop. Each jpg has been painstakingly optimized in photoshop. When I export to PDF, there is no passthrough option. I read in forums that setting compression to "maximum" will essentially pass-through as long as no downsampling is done. However, this is not the case.
Both jpegs are around 250KB, so I'm aiming for a pdf around 500-600KB. However, when I set "do not downsample" and compression to "none," I get an uncompressed file (70MB) essentially converting my jpegs to tiffs. When I set the compression to "maximum" I get a file that is 1.2MB. When I set the compression to "medium" I get a pdf file that is 400KB. So, this tells me the export is clearly recompressing the file no matter what setting I choose. How do I set it to not touch the images and pass-through the files? I want photoshop to do all the compression work, not indesign.
Is there anyway to achieve this?

You can see what happens if you compare an uncompressed PSD with an overly compressed jpeg placed in ID.
The two side by side in Photoshop where you can clearly see the artifacts in the jpeg:
Placed in ID the jpeg's overly compressed pixels are still visible—these are the pixels that get exported
If I export to PDF with minimum quality you can see the compression artifacts in the PSD and newly added artifacts in the jpeg:

How do I enable SPDIF pass through on Audigy 2 ZS Notebo

Similar Messages

Maybe you are looking for