How do I enable TPM in the bios on Product name: HP Pavilion dv7 Notebook PC

Hi,
I have run into a problem trying to enable MS Bitlocker on Windows 8.1 on
Product name: HP Pavilion dv7 Notebook PC
BIOS version is: F.1C
In the Windows UI, the TPM (Trusted Computing Module) management console says that I need to enable TPM in the BIOS.
Issue:
There does not appear to be any proverbial "on" switch in the BIOS for TPM versions 1.2 (or 2).
Question:
Anyone out there know how to resolve this?
I know there may be a way to get around this using group policy on the machine or to buy a USB key solution. 
Looking for the hardware solution in the laptop if possible please.
Thanks in advance for any help.

Hi:
As far as I am aware, HP consumer notebooks do not have a Trusted Platform Module chip.
Check the device manager...if there is a TPM chip, there will be a Security Devices category in the device manager, and you would see the TPM chip listed under that category.
If not, then there isn't one.

Similar Messages

  • Product name: HP Pavilion 15 Notebook PC, unable to take the recovery set using sandisk cruzer 32GB

    I am unable to take the recovry set through HP Recovery Manager by using New SANDISK CRUZER SWITCH (32 GB)
    It is prompting to insert the USB drive or Disks, once i insert the USB drive its not moving to further steps.
    Please rectify this problem
    Regards,
    Jagannadha Raju

    If you are running Windows 8 and you are using a flash drive that has the Windows 8 compatibility icon that could very likely be the problem. It is a known issue and last I heard on it HP is working on a patch/update for Recovery Manager. If it has been released it should be on your driver page. If not I suggest trying an older flash drive with no Win 8 compatibilty icon.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • What is the max RAM capacity of HP Pavilion 15 Notebook PC

    I have 2GB RAM. I want increse my PC RAM what is the max RAM cpacity of my PC
    Product Name: HP Pavilion 15 Notebook PC
    Product number: F0C25PA#ACJ

    Hi,
    Your machine is a "HP Pavilion 15-e024tu" which has 2 user accessible slots:
       http://support.hp.com/us-en/document/c03921877
    and its supports (page #4 of the manual)
    Support for DDR3L (1600-MHz) dual channel
    Support for 8192-MB of system RAM in the following configurations:
    ● 8192-MB (8192-MB×1, 4096-MB×2)
    ● 6144-MB (4096-MB+2048-MB)
    ● 4096-MB (4096-MB×1, 2048-MB×2)
    ● 2048-MB (2048-MB×1)
    Please use the following manual to get more information (RAM type) and how to replace RAM:
       http://h10032.www1.hp.com/ctg/Manual/c03939658
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I enable iTunes in the Windows Firewall

    How do I enable iTunes in the Windows Firewall?  I use ESET Security which manages my Firewall.

    Try this document instead:
    iTunes 10 for Windows: Enable iTunes in the Windows Firewall

  • How do I enable scrubbing in the iTunes 11 mini player?

    How do I enable scrubbing in the iTunes 11 mini player?  I don't see a bar or any way to manually skip to the part of the song I wish to play.

    I did notice this: If you click on the album cover artwork squre, yet another window opens—a square, frameless window that shows a scrubber when you move your mouse over it. There's still no way to just glance at the window and see your current position within the track, though. You have to hover your mouse over that square window (which lacks an obvious name within iTunes).

  • HT2731 how do you enable cookies from the iTune store so I can download music

    how do one enable cookies from the iTunes store so I may download music?

    Search for music and then buy it.
    If you already have music you want to import to the iPhone, connect it to your computer and open the iTunes application on the computer, and start a sync (in the lower right of the window).

  • How do you enable cookies on the iPad

    How do you enable cookies on the iPad?

    Settings -> Safari -> Accept Cookies -> "Always" or "From Visited"
    Regards.

  • How can I enable FTP on the DMP and How can I FTP to it and then remove the files that were deployed to the DMP flash?

    How can I enable FTP on the DMP and How can I FTP to it and then remove the files that were deployed to the DMP flash? My platform of DMS is 5.2.2

    Hi Temur, ok. I do the above procedure and it worked fine
    Now, I have other question?
    How can I reproduce any file (for example: a video, an url page, an image), that is in the flash of DMP?
    Índice de ftp://172.17.15.22/tmp/ftproot/tmp/ftproot/tmp/ftproot/usb_1/
    Subir al directorio superior.
    Nombre Tamaño Última modificación
    Sample Videos.lnk
    1 KB
    17/06/2011
    06:25:00 a.m.
    deployment
    29/06/2010
    04:14:00 a.m.
    lost+found
    25/02/2010
    12:00:00 a.m.
    video futbol en la playa.mp4
    1390 KB
    29/06/2010
    01:08:00 a.m.
    videofutbol.mp4
    1390 KB
    29/06/2010
    01:38:00 a.m.
    I like, that el DMP when loss conectivity with DMM, It display at the LCD screen, the video named videofutbol.mp4, this video As I show in the picture above, already in the flash of DMP.
    I appreciate your early response.
    Thanks

  • HP Pavilion dv7 notebook, Windows 7: How do I disable an audio jack?

    My Pavilion dv7 notebook includes two audio jacks for headphones on its right side (my left when facing it.) Long story short, a hefty piece of an iPod headphone has dislodged and been stuck inside one of these two jacks; there's no way I'd be able to remove it without taking apart the notebook. I can still receive audio via headphones when I plug headphones into the other jack, but I can no longer receive audio from the internal speakers. 
    I'd like to diasble both headphone jacks manually when I'd like to hear the speakers --  but I can't figure out how. When I access my 'Speakers and Headphones Properties' (IDT High Definition Audio Codec, through Sounds --> Playback Devices) and attempt to disable the device, all sound is disabled. There appears to be no way to selectively disable either just the speakers or just the headphones. 
    Any ideas? 

    ...I'm still curious as to whether I can receive any assistance regarding this issue.

  • Bios update failore with black screen and 3 time flashing, my product name is (Pavilion g6-2162se) .

    Hi
    I have Hp Laptop, my product name is (Pavilion g6-2162se), I downloaded The drivers from the page, when I installed all drivers, the bios updatede to, but its failore, and now my computer not working means with black screen and 3 time flashing .
    please help

    Hi,
    Check if this helps:
    Restoring the BIOS
    If it is blinking 3 times it usually indicates memory issue..So you can try reseating the memory modules or try one memory at a time in each slot..
    Refer the links below:
    HP Notebook PCs - Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot
    Removing and Replacing a Memory Module for HP Pavilion g6-2000, g6-2100, g6-2200 and g6-2300 Noteboo...
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • Using the touch pad on my new pavilion dv7-6b50ea

    hi, can anyone tell me how the touch pad switches on and off,and if it is possible to scoll using the touch pad on my new pavilion dv7-6b50ea

    Did you try '''Ctrl'''+'''0''' (zero) to reset the zoom.
    You did that with by holding the control key and scrolling on the right edit of the pad, which is equivalent to Ctrl+scrollwheel on the mouse.
    Ctrl+0 to restore zoom to normal (Ctrl+- zooms out, Ctrl++ zooms in )
    The problem with the Zoom toolbar buttons (+ and -) builtin to Firefox 4 is that there is no way to zoom directly to normal (100%) nor even tell what zoom level you are at.
    For more control over zooming things see these [http://dmcritchie.mvps.org/firefox/firefox.htm#zoom zoom links]
    To set the zoom permanently on a per site basis, try the [https://addons.mozilla.org/firefox/addon/nosquint/ NoSquint] extension, which optionally remembers on a per site basis.

  • Is there a fix for the noisy keys on a HP Pavilion dv7 6163 US? Especially around the "a" key

    Is there a fix for the noisy keys on a HP Pavilion dv7 6163 US? Especially around the "a" key

    I have the same problem, and this did NOT fix the issue!
    Edit:  I would give you negative kudos if I could.  I have seen hp reps post this as a solution way too many times.  THIS DEFINITIVELY DOES NOT FIX THE ISSUE!

  • How do I enable sounds in the finder in 10.8.2?

    When I deleted a file in the Finder or emtied the trash I would have a sound that I don't have in ML.
    How do I enable it? Do I need Tinker Tool, or am I missing a setting somewhere?
    Thanks

    HI,
    So...
    Like mine it reads Headphones but is in fact a device that is plugged in to that Socket.
    You can see that I have some Extra (Custom) sounds and these are stored in ~/Library/Sounds.
    Do you have any additional Sounds ?
    If yours are Built-in (System) ones only which ones are listed ?
    The System ones are the ones you were talking about at the beginning.
    In Messages > Preferences > Alerts are the ones for Messages  (They are tucked away in the App).
    Do the Sounds Play in Messages when you test/change them ?
    Select the current choice showing in the sound choice drop down to Play in Messages.
    This volume may be different to the System Alerts as they are played by different methods.
    Does Skype have similar sounds for Logging in, Inviting and connecting and so forth ?
    Can you hear those ?  (either in the App or as Alert sounds in normal use)
    7:49 PM      Saturday; November 3, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How do i enable spanish in the safari dictionary?

    I understand from the last sentence on description of the safari dictionary on the Apple website, Spanish should be supported.  But no definitions for Spanish words come up.  How do I enable Spanish?  Is it possible to obtain translations to English as well as definitions in Spanish?
    http://www.apple.com/osx/apps/all.html#dictionary
    Dictionary
    Words at your fingertips.
    Find definitions and synonyms using the New Oxford American Dictionary and Oxford American Writer’s Thesaurus, which include over 250,000 words, in Dictionary. You can look up words directly from a variety of applications, including Safari and Mail. When you’re connected to the Internet, you can look up terms in Wikipedia directly from the Dictionary application. That means access to millions of articles written by thousands of people all over the world. Dictionary even includes a list of Apple terms and definitions — such as “Finder” and “AirPort” — that help you get to know your Mac better. And Dictionary includes support for British English, Japanese, Japanese translation, Japanese synonyms, Simplified Chinese, Spanish, and German.

    To enable dictionaries, you go to dictionary.app > preferences and check the box you need.
    Apple doesn't supply a translation dictionary for Spanish, but you might be able to add it if you can find one somewhere:
    http://m10lmac.blogspot.com/2013/01/adding-dictionaries-to-dictionaryapp.html

  • HT5492 How do I enable Books in the list of Controls?

    I can't even select Books .. It's disabled. It's the only option in the list I can't change. Every other one is enabled. How do I enable Books to change it?

    I'm afraid that this doesn't help. From the research I've done, I suspect I need text to add to the registry to make Firefox appear in the default programs list.
    Incidentally, I may not be able to reply after this to messages in this thread, as much as I would like to. I just received a bewildering message indicating that my IP address has been banned from the Mozilla board until April 14 -- although this message is the only one I've posted on the board for several years!
    If an answer is given, though, I hope I can view it ... on another computer, if necessary.

Maybe you are looking for

  • Issue with iTunes organizing music

    I'm having some questions about the way iTunes organizes my music. In this image below shows what I mean. It's putting random songs in a compillations folder when they are part of the same CD as the ones that aren't in the folder. It makes no sense a

  • Change settings on how I open an image

    Everytime I click on one of my pics I no longer see the "open with" option and it automatically opens with PSE 11.  How do I change this?  I want to be able to choose which editor I want to use and not be forced to use PSE 11 every time..

  • I have an iMac 24" bought in sept. 2008.

    I need to improve it's speed. I now have 2GB DDR2 SDRAM in one slot and the other one is free. Would any DDR3 generation be compatible with the mother board in my computer ? Do I have to by exactly the same generation of DDR memory card ?

  • Error -50 when starting iTunes Store

    I'm running the newest version of iTunes on a Windows XP machine and iTunes itself seems to work, but evertime I hit the iTunes Store button on the left side I get an error message stating 'We could not complete your iTunes Store request. An unknown

  • CS6 Three-Way CC not importing setting from CS5.5 Timelines or from Saved Presets from CS.5.5

    Hello, I had created two presets for the CS5.5 Three Way Color Corrector that I use in almost every project for dealing with sun shadows and hightlights on talents's skin and they no longer work in CS6.  I've tried loading the old project/timeline/se