How do I enable (turn on) wireless on my Envy laptop?

i dont knw how to switch on the wirelss on my Envy
This question was solved.
View Solution.

Check the Lights on the F12 key if it is amber that means your wirelss is not on ..try to push the F12 Once it will turn Blue and thn try access the internet
that might help you
Good Luck
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Similar Messages

How I can enable "turn the page" with two fingers

my problem is I want to enable the option to "turn the page with two fingers" to serve everywhere (Google Chrome, Finder, etc) but the problem is notserved with two fingers, serves only the option to turn pages if I put three fingers
Help!
All this happens in my macbook with OS X Lion

I had already tried that, but does not work, just when I put "three fingers" work everywhere, but when I put "two fingers" does not work in any place

How do I enable my touch screen for my new laptop?

Just bought a New Hp Pavilion TouchSmart 15 Notebook n090sa and was wondering how i enabled the touch screen as i cant seem to find any information on this.
Thanks in Advance

You shouldn't need to do anything, as the TouchScreen was enabled at the factory when Windows was installed.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How do I delete Wild Tangent games from HP Envy laptop?

I'm trying to delete the Wild Tangent games from my laptop, but they won't delete. I already went into the Control Panel and deleted the Wild Tangent folder, but the games are still there. In the uninstall program folder it says a bunch of apps, but I can't find HP games. Instead it says:7-ZipAdobe Shockwave PlayerBonjourCyberlink Meida SuiteCyberlink MediaExpressoCyberlink PhotoDirectorCyberlink Power MediaCyberlink Power2Go 8Cyberlink PowerBackupCyberlink PowerDirectorCyberlink YouCamDropboxEnergy StarFoxit PhantomGoogle ChromeHP 3D DriveGuardHP CoolSenseHP DocumentationHP Registration ServiceHP SimplePassHP Support AssistantHP System Event UtilityHP Wireless Button DriverIntel WiDi Media ShareIntel Management Engine ComponentsIntel(R) Pro/Wireless DriverIntel(R) Virtual ButtonsIntel(R) WiDiIntel(R) Wireless Bluetooth(R)Intel Graphics DriverIntel Rapid Storage TechnologyMcAfee LiveSafeMicrosoft OfficeMicrosoft Visual C + + 2005 RedistributableMicrosoft Visual C + + 2005 RedistributableMicrosoft Visual C + + 2008 x64 RedistrubutableMicrosoft Visual C + + 2008 x86 RedistrubutableMicrosoft Visual C + + 2010 x64 RedistrubutableMicrosoft Visual C + + 2010 x86 RedistrubutableMicrosoft Visual C + + 2012 Redistrubutable (x64)Microsoft Visual C + + 2012 Redistrubutable (x86)RealTek Card ReaderRealTek Ethernet Controller DriverRealTek High Definition Audtio DriverSynaptics Pointing Device Driver Which one do I have to delete to get rid of the Wild Tangent Games? Thank you.

I found I could uninstall them by going to the Program Files (x86) folder. Search for a folder with Wild Tangent in the name BUT DO NOT DELETE THIS FOLDER YET. Under that folder you will find a folder for each game. Run the uninstall program in each game folder. As you run the uninstall that folder will be deleted. Once all games have been uninstalled the Wild Tangent folder should be empty. You can now delete it. Hope this helps.

[solved] How to re-enable wireless without rfkill?

After disabling networking with KDE's network manager's Airplane Mode and rebooting, the network manager no longer recognizes my wireless card. All the articles I can find suggest using rfkill, but I do not have rfkill installed, and I'd rather not go through the hassle of trying to install a package without internet access.
I've had this issue before, and I saw a suggestion in a forum somewhere to check a specific networking-related file that listed the networking devices (I think) and enable it there, which worked last time. The problem is, now I can't find that forum post, and I can't remember which file it is that I need to check.
Does anyone have any suggestions for how I can enable my wireless this way?
Last edited by TheGuyWithTheFace (2014-12-24 21:37:32)

Part of the original issue is that when this happened, I did not have rfkill installed. That being said, once I installed it and recreated the issue, the output was:
rfkill list:
0: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: no
Interestingly, after I ran
rfkill unblock 0
the issue persisted, though Wireless LAN was no longer listed as blocked. I tried rebooting afterward but to no avail. The only way to fix it that I could find, even with rfkill, was to modify /var/lib/NetworkManager/NetworkManager.status

HT5594 After updating to iOS7 on my iPhone4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

After updating to iOS7 on my iPhone 4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

I finally just resolved this after not being able to enable location services since upagrading to iOS 7. Posting the solution here 'cause I couldn't find it anywhere else.
I enabled Restrictions under Settings > General > Restrictions and created a passcode (I'm not sure if this was part of the solution, but it wasn't enabled for me by default.)
In Restrictions, under Privacy, Location Services was set to "Allow Changes" (This still didn't solve the issue of the greyed-out Location Services switch though - I still couldn't turn it on.)
Also in Restrictions, I also switched "Find My Friends" to "Allow Changes"
Once I did step 3, the switch under Settings > Privacy > Location Services was no longer greyed out and could be switched on.
Hope this helps!

HT5467 I can't slide the slider across to turn on location services, anyone know how I can enable it?

I can't slide the slider across to turn on location services, anyone know how I can enable it?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Misplaced my ipad mini now i have found it . how do i enable it . i turned it on and the message read disabled try again in 22,809,570 minutes. really.

misplaced my ipad mini , now i have found it how do i enable it . i turned it on and the message read ipad is disabled try again in 22,809.566 minutes , really

Restore it.

How do I enable the security for my wireless connection?

How do I enable the security for my wireless connection?

Enter the setup page (192.168.1.1), hit the Wireless Tab, then the Security tab.

How do i enable wireless n

Hi
I have a Wireless adaptor with the following spec as displayed in Network Utility:
Wireless Network Adapter (802.11 a/b/g/n)
Linkspeed : 130M bit/s
Card Type: AirPort Extreme (0x14E4, 0x88)
How do I know if the n router is enabled? if it is not, how do I enable it?
Appreciate advise.
Regards
Jojo

Did you Option-Click on the Airport menu bar icon to see if the Mac is connecting to a channel that is 136 or greater, and if it says 5GHz?
Also are you measuring your speeds between computers in your home? Or are you expecting your internet speeds to increase?
If measuring speeds in your home, what was your test? For example, I've tried copying files, and discovered that the destination disk drive was too slow. I've also tried different file transfer protocols and found them to behave differently. Apple File Sharing (AFP) was fairly good. But there is also CIFS/SMB, scp, sftp, ftp, rsync, carbon copy cloner over the net, etc...
802.11n between computers in your home or to a TimeCapsule backup device should allow faster transfers.
However, 802.11n will NOT make your broadband connection go faster, unless your broadband service is in the neighborhood of 30 megabits/second or faster. An 802.11g WiFi setup can easily handle 25 megabits/second speeds. The other 802.11n benefit is in a dense neighborhood, where WiFi base stations are stepping on each other, 802.11n offers more non-overlapping channels.
Finally, not all 802.11n base stations are created equal. I know that in the early days, some vendors were offering the 802.11n protocols, but using under powered hardware that was lucky if it could sustain 50 megabits/second when other vendors were easily doing 100 megabits/second. That was a few years ago, so I expect things have changed since then.

Re: Equium L40-156 - How can I turn on wireless?

Please help!
Toshiba Equium lL40-156 wireless swich or FN+F8 wont turn on wireless function.
Never used it before but the light used to come on.

Hello
If you want to enable WLAN card you must move WLAN switch to position ON and then use FN+F8 key combination to enable WLAN card.
I don't know what do you mean with your last posting but if you install Vista again the WLAN card will be installed properly and must be shown in device manager.
When finished do what I wrote and I am pretty sure the WLAN card will be enabled properly.
Good luck!

To sync WIRED, need to turn off WIRELESS feature on BB. HOW?

The Desktop Mgr says to turn off the WIRELESS feature on my Curve 8310 in order to sync with my home laptop. On the BB, where is this nonwireless/wireless feature? I'm trying to sync thru the USB port with a cable. Previously this Curve was synched wirelessly to an employer's computer at a job I no longer have.
Solved!
Go to Solution.

Well you can do one of 2 things:
Go into the database (Calendar, Address Book, etc), hit the menu button, choose Options. From there you can turn the Wireless Synchronization Off. You can leave the settings to Off for each database that you want to synchronize with.
You can follow these steps to remove the IT policy from your phone. This will remove any polices that may still be in effect on your device when it was connected to your company's BES. Doing so will take those wireless synchronization lines off of your phone. http://www.blackberryfaq.com/index.php/Remove_IT_Policy
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

How do I turn OFF wireless for HP d110 printer

I'd rather it just go through my USB since my wireless is shaky at best.
There does not appear to be an 'OFF' option when you use the printer's menu for wireless.
Please help!
Thanks,

Also, you could turn the wireless off using the Network menu on the front panel of the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement.

After a Windows 8.1 automatic update yesterday my other wireless devices like smart phones, tablets, etc can't use my routers wireless signal unless my laptop is turned on

Hi guys, please help, I'm desperate.
After an automatic update to my windows 8.1 yesterday none of my other other wireless devices like smart phones, tablets, etc. can join my wireless network unless my laptop is turned on. If I turn my laptop off, after a couple of minutes my iphone,
my wife's iphone and my Galaxy Tab lose connection and are unable to join my router's network. When I turn my laptop back on, all the other devices are able to use my router's wireless internet without any problems. How can I fix this???
Thanks.

Hi,
First, I suggest to reset the router, meanwhile disable the network card and enable it again, because it is obviously network issue.
Then, as you post this happened after windows update, try to find the update that was already installed on your computer
Restore your computer by following the way listed below:
http://windows.microsoft.com/en-us/windows-8/restore-refresh-reset-pc
Hide the update if it is not an important one and related to wireless internet according to this article:
http://technet.microsoft.com/en-us/magazine/ff382716.aspx
I hope it works for you .
v-yamliu

How do I enable (turn on) wireless on my Envy laptop?

Similar Messages

Maybe you are looking for