How do i enlarge a scanned photo in my f4100 series

how do i enlarge a scanned photo in my f4100 series

To scan to a computer
1. Place your original with the side you want to copy or scan face down on the left front
corner of the glass.
TIP: For quality copies, ensure that the scanner glass is clean and that there are
no foreign materials adhering to it. For more information, see Clean the glass.
2. Press Scan.
If the original is a document, the HP All-in-One scans it automatically. If the original
is a photo, a preview image of the scan appears on your computer, where you can
edit it. Any edits that you make apply to the current scan session only.
The HP Photosmart Software has many tools that you can use to edit your scanned
image. You can improve the overall image quality by adjusting the brightness,
sharpness, color tone, or saturation. You can also crop, rotate, or resize the image.
3. Make any edits to the preview image, and then click Accept when you are finished.
You can use the tools in the HP Scanning software to modify a preview image. Any
changes that you make, such as brightness, image type, resolution, and more apply only
to this scan session.
You can make additional changes in the HP Photosmart software after the image is
scanned.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Similar Messages

How do I enlarge a scanned slide in iPhoto? It scanned fine but appears quite small in the middle of the page, surrounded by black.

How do I enlarge a scanned slide that I have imported to iPhoto? My Epson printer scanned it fine but I would like to make it larger, instead of having it appear small and in the middle of the screen, surrounded by black.

Zoom into it. There's a slider at the bottom of the iPhoto Window.
Next time, try scanning to a larger size.

How can I move/copy scanned photos that were sent to my gmail account? I have not been able to move or copy to iPhoto.

How can I move/copy scanned photos that were sent to my gmail account? I have not been able to move or copy to iPhoto.

Hello SusieMacBook,
Welcome to the Apple Support Communities!
You can definitely get these photos into iPhoto if they are the correct file type (JPEG, GIF, TIFF, and PNG). The way you import the photo attachments depends on where you check your e-mail. The following article is for iPhoto 11 (but should work for previous versions as well). It outlines how to import photos from Mac Mail, other e-mail applications, and web browsers, so just look at the section that applies to you.
iPhoto '11: Import a photo sent in email
http://support.apple.com/kb/PH2354
I hope this helps!
Best,
Sheila M.

How do I enlarge a small photo I have scanned to my computer photo album ("My Pictures") to facebook; the steps that worked for Internet Explorer won't work for Mozilla?

I scanned a small photo(2 x 3) with my Dell printer and stored it in my computer photo album "My Pictures." Now I would like to upload an enlargement of the picture to my Facebook photo album. The steps I used with Internet Explorer for enlarging an uploaded photo for Facebook will not work with Mozilla. My Adobe Flashplayer that I used with Internet Explorer would not work with Mozilla, so I downloaded a plug-in Adobe Flashplayer (10.) What else do I need to do? Please give me specific instructions as I am 69 years old and not as computer literate as young people! LOL Thank you. Evelyn Drown E-mail: [email protected]

Some website that can resize images:
* http://www.resizr.com/
* http://www.shrinkpictures.com/
* http://www.picresize.com/

How do I overlay two scanned photos of a real painting?

I'm a professional artist so I need really good photos of my work for promo and gallery applications. My Brother gave me a really good Canon Scanner. He told me I should try and scan my paintings, laying them on the scanner one way then the other (from top bottom and then side to side). Once in the computer he said I should overlay them in photoshop (Elements 7) to minimize the glare from the brushstokes (It's oil paint). I attempted it with the help of an old discussion on the forum (http://forums.adobe.com/thread/944267). It worked but it's really blurry. I've tried playing with the opacity levels but can't seem fix it. Any suggestions would be very appreciated!
Andrew

Hi Neale,
Thanks for replying. The painting was scanned at a resolution of 300 dpi both times. I assume that's ample for this purpose?
Yes, one image shows glare in one direction and the other image another direction and I'm trying to blend the non-glare elements of both images.
Using a mask to paint in the non-glare elements is likely what I'll need to do.
Here are some screenshots of the scanned oil sketch that show how far I've gotten and the problem.
Above is a detail showing what I mean about the glare from the brush strokes. In a good artist grade print you wouldn't see so much of the glare.
I've got a backround and a layer - one is the 'top to bottom scan' and one is the 'side to side scan'.
When I put the one layer over the other it's a blurry mess. The only thing I can think of is that one scan is ever so slightly tilted causing it to distort.
Let me know what you think. If it helps, the scanner is the 'Canon Canoscan 9000F Mark II'.
Sorry if I'm a bit of a newcomer at this. I've had Photoshop Elements 7 for a while now but have only been using it for common purposes and I'd really like to learn how to take advantage of all the features and tricks it can do.
Cheers,
Andrew

How can I click on a photo to enlarge it in a separate box?

How can I click on a photo on my webpage and show an enlarged photo of it? Everything I read points to "thumbnails" under "slideshows". I do not need a slideshow, just an enlargement with a text box. Help.

If Thumbnails or Lightbox slideshow widgets do not fit your purpose and if its just a placed image on a page that you'd like to show an enlarged version of when clicked, you can simply use the Hyperlinks -> Link to File option to link it with a larger version and select the option to Open the link in a new window or tab from the Hyperlinks tab in the Control bar.
Following the above method would not allow you to place a text box as its just a static asset that you are linking to, however, you can choose to add the text in an Image editor program (or even Muse for that matter), save and link it. Or you could place the enlarged image on a separate page with text and everything and link the image to the page.
Thanks,
Vinayak

On my iphone 5s, in "photos" when I touch to enlarge, random new photos taken with 5s appear as old photos taken with 4 years ago - that aren't even on the laptop that I plug into. How do I correct this?

On my iphone 5s, in "photos" when I touch to enlarge, random new photos are showing as old photos. For example, let's say I'm looking in an album at a photo of a dog I took today. If I touch to enlarge- that photo of a dog is suddenly a photo of a family member taken three years ago (on my old iphone 4). This is random and has happened to about a dozen photos. This has caused me to accidently delete new photos thinking they were old ones until I figured out this was some sort of glitch. The old photos that are posing as new photos aren't even on my laptop that I plug into - they've been on my external hard drive for awhile so I don't even know how they're linking! Any suggestions??

I've tried both ways. My Computer locates the device but doesn't see the old photos, only listing the new photos.
I no longer have the iphone3; I just transferred the photos from the 3 to the 4.
Was there a format change or file type change or did the transfer process create something different? I can still see and access the old photos if I go to that album on the phone. But that's the only place where I can see them or access them.

I have an imac 27 inch O SX 10.6.8. using iphoto 11 Version 9.1.5. I have scanned some photos at very high resolution with each photo being about 45MB. They're saved to desktop. How can I reduce the size of the scanned photo's they are crashing iphoto

I have an imac 27 inch O SX 10.6.8. using iphoto 11 Version 9.1.5. I have scanned some photos at very high resolution with each photo being about 45MB. They're saved to desktop. How can I reduce the size of the scanned photo's they are crashing iphoto.

What format are they? Tiif? Jpeg? You can compress them with a lot of apps - including Preivew and just about any graphics editor out there. I'm not sure that 45mb would crash iPhoto thogh, are yo sure that's the cause? I know that some folks have mentioned pixel dimensions causing issues, as can color profiles.
Regards
TD

How to get larger scanned photos in I-photo on a Mac

Want to get larger scanned photos from scanner to I-Photo files on a Mac.

Thanks for providing that information Fudgeface.
Are you using the Full Feature Software and Drivers?
HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
Check the driver name that is installed for the printer. The Airprint driver might be installed instead of the Printer's driver. (usually defaults to Airprint)
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
If the printer name shows Airprint, then that is the Apple drivers. Delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
With the HP Software, once you go into Edit, you should have the option for custom sizes.
Using the Apple Printer and Scanners software, you will also have the option for custom sizes.
I have provided a document for how to scan with HP Software or Apple's Software and make changes.
How to Scan: OS X v10.9.
Let me know how you make out.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do I get my HP 7525 scanned photos to show up in my Windows Photo Gallery?

When I scan photos on my HP 7525, they show up in Documents on my Dell PC. I want them in my Windows Photo Gallery. How can I make make this happen? My PC is connected to the printer with a USB cable.
Thanks for any help you can offer.

I don't have a windows photo gallery on my PC (I'm running Windows 7).
I pulled the following from the Microsoft help page:
When I import pictures and videos from my camera, how do I change where they are saved and what they are named?
By default, all pictures and videos are saved to the Pictures folder in a folder named for the current date and the tag you assign to the pictures when they’re imported. Each picture is given a name that includes the tag. To change the way your pictures and videos are saved to your computer, do the following:
Open Windows Photo Gallery by clicking the Start button , clicking All Programs, and then clicking Windows Photo Gallery.
Click the File menu, and then click Options.
Click the Import tab, and then do one of the following:
Click Browse to change the folder that pictures and videos are copied to.
Click the Folder Name list to name the folder using other elements, such as the range of dates in which the pictures were taken. You can add several items together to create a more descriptive folder name.
Click the File Name list to change the information that is used to create the picture's file name.
When you are finished making changes, click OK.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How do I re-assemble two halves of a large scanned photo to create the original picture in CS3

How do I re-assemble two halves of a large scanned photo to create the original picture in CS3

Good day!
Is there overlap between the scans?
If so File > Automate > Photomerge might be enough, otherwise you can load both images in one document and manually align/distort them and address color/brightness-diferences with Adjustment Layers.
Regards,
Pfaffenbichler

How do I save an enlargement of a photo on i photo from the original?

I want to save an enlargement of a photo on i photo from the original but don't know how.

That is done with cropping - crop to show the desired area and click Done - the cropped ("enlarged") image is saved
LN

After several years of taking photos(thousands) I seem to have many duplicate photos in iPhoto. How do find them all without going through 10,000 photos? they are mostly scanned photos that I have reused over the years

after several years of taking photos(thousands) I seem to have many duplicate photos in iPhoto. How do find them all without going through 10,000 photos? they are mostly scanned photos that I have reused over the years not ones that I have recently uploaded from my camera.
Thanks whoever can help

Where are you seeing these duplicates? In the iPhoto window or in the Finder?
OT

How to scan photos to computer

How do I scan photos to the computer so that they show as a photo image? When I scan a photo, the printer does not recognize the edge of the photo. Instead it scans the entire glass and shows me a photo in the corner of a large white document.

Hi,
Probably it is not smart enough therefore we have to tell it by select from a pull down windows from the menu:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I scan photos to my macair?

How do I scan photos using an HP M2727 Laserjet printer? I hooked it up, but I don't get all the features.

how do i add photos to my ipod without losing photos that already exist on the ipod but not the computer?
Well, If you've deleted the photos off your computer, then when you connect your iPod, they'll probably be automatically deleted off of it.
Try this, though:
Open iTunes.
Go to "Edit -> Preferences -> iPod". Without the iPod connected, it should say "No iPod connected". Leave this Preferences windows up and running; I believe this may prevent iTunes from seeing your iPod as a connection.
Then, if you want to copy photos from your iPod to your computer, then see these programs:
iPodPhotoCopy
CopyPod Photo
Then, move those photos that you have transferred to your computer to a new folder, for example. Name the folder, then add the other photos that you previously were wanting on your iPod into this new folder.
In Edit -> Preferemces -> iPod -> Photos, select this new folder to sync to your iPod ("Browse" for location).
I hope this helps,
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

How do i enlarge a scanned photo in my f4100 series

Similar Messages

Maybe you are looking for