How do I ensure my hard drive is not partitioned?

I am trying to run bootcamp assistant to partition the hard drive prior to installing Windows on a Mini Mac 2,1. The assistant says I have already partitioned the drive but Disk Utility says it is an 'extended' drive. Do I need to reformat the main drive and reinstall OS 10.5.x?

Your HDD is partitioned, and it's good that way because then you have an OS X installed and access to the Boot Camp Assistant.
So, you don't want to change that, and Boot Camp does not change it, either. The only thing that Boot Camp does is to "take" a part of that partition and make it a separate one for Windows. You want to make sure it's big enough, depending on what you are up to with Windows, but no harm will be done to your data on the main partition where OS X lives.
"Extended" is only a name for the HDD format that OS X prefers, no further interpretation or even worries needed.

Similar Messages

External hard drive will not partition correctly

This is a somewhat long post, but the point is this: I have a new 1TB Fantom GreenDrive (attached via USB) which I cannot partition the way that I want to. I want to allocate 300G for a Time Machine backup partition and the remainder as a partition for everything else. For some reason, I'm only able to partition the drive so that it has two equal-size partitions. While this isn't terrible (the 300G figure was somewhat arbitrary), I'm curious to see if anyone knows what's going on here. As part of my tale, I list three "mysteries" that have really stumped me.
For at least a year now, I've had two external USB drives attached to my machine through a hub. One (a Fantom Titanium-II 500G drive) was for Time Machine, and the other (a LaCie 150G drive) was for other files. These drives were almost always connected to my machine, and they were almost always powered on. About three weeks ago, the Time Machine drive started unmounting, seemingly randomly, from the computer. When I tried to verify it in Disk Utility, it gave me an error, and the drive would again unmount. At the same time, I started having problems with the LaCie drive - when I plugged it in, the Mac gave me a message saying that the drive wasn't working properly and that I had to back up everything on it.
This all seemed too coincidental to me, and so is the first mystery of my saga. However, I saw the GreenDrive on sale and decided to pick one up, rather than trying to fix the two drives. When I connected the GreenDrive to the computer, it was formatted at NTSF. When I tried to format it as Mac OS Extended (Journaled), Disk Utility gave me an error.
If I booted the Mac into Windows, I could format the drive again as NTSF, and it would work fine. When I went back into the Mac side, it worked there, too (that is, I could read from it and write to it). Also, I could use Disk Utility to format the drive as MS-DOS (FAT). Of course, I needed to format the drive for the Mac so that it would work for Time Machine.
When I went into the Time Machine preference pane and selected the GreenDrive for Backup (which was still formatted as MS-DOS (FAT) at the time), and did the erasing from within Time Machine, I was able to get the drive formatted as one large Mac OS formatted partition. Why I was able to successfully format it from Time Machine, but not from Disk Utility (which I believe is what Time Machine uses for the erasing, anyway) is the second mystery.
So, now I had a 1TB hard drive set up a single partition. I still wanted to divide it in two. However, when I tried using Disk Utility to partition it the way I wanted, I got an error saying the partition failed. Just as a test, I tried partitioning as two equal-size partitions, and this worked. Why it would let me partition in this configuration, and not the way I wanted, is the third and final mystery.
In the end, I'm almost where I want to be. I had to spend a little bit of money, but I have more total storage space available, and it seems to be working fine. Also, I was able to format the LaCie drive, and it seems to be working well, so it wasn't a total loss. Still, any answers you guys can provide would be greatly appreciated.
<Edited by Moderator>

Be sure your drive is initially partitioned into one single volume. Then format the volume for Mac OS Extended. Once that's done re-partition the drive into two volumes (if that's what you desire) then resize them as you want. How you do the resizing may be important. Usually the larger volume is the first or top volume. Select it by clicking on its rectangle in the sizing gadget. Then in the Size field enter the size you want. That should result in the first volume being resized to what you want and the second volume automatically resizes accordingly.
Here's how I suggest doing it:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the drop down menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Hard drive will not partition

Any steps or changes I need to do in order to partition my hard drive?
An error message keeps popping up saying "Couldn’t modify partition map because file system verification failed."

Do what? Backup? This will get you started.
Basic Backup
Get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.
Once you have a backup then you will need to do the following:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one or more. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU when the process is completed to return to the installer. Install OS X on the first volume if you created more than one.
NOTE: Do not make more than one partition if you intend to use Boot Camp Assistant to create a Windows partition.

How to back up a hard drive with Time Machine

Yesterday I left my MacBook Pro at the airport security check. I called today and they told me it was gone, probably stolen. Since I didn't want my files or data to fall into the wrong hands, I used iCloud and logged on to my account, found my MacBook device, and selected Erase Mac. Lo and Behold, as fate would have it, I received a call from airport security 15 minutes later that they had in fact found it. Unfortunately, my call to Apple Support indicated that once Erase Mac is selected, it's like pushing the launch button on a nuke. It cannot be undone. Further conversations revealed that in order to not completetly lose all my files, I need to back up my MacBook to another hard drive prior to connecting to WiFi.
So, here's my plan. I have another iMac at my house with approx 500G of available hard drive space. My plan is once Fed Ex delivers my MacBook, to use Time Machine to back it up. I've never done this before. I have a FireWire cable for this task.
Is my thinking correct for the following steps:
1. Open MacBook in a Non Wifi environment.
2. Click on Time Machine Preferences
3. Connect my MacBook Pro with my iMac using FireWire
4. Select the Hard Drive from iMac as the source.
Will there be additional instructions then to follow?
How will I know when the back up is complete?
After the back up is done, do I then open the MacBook up in Wifi and allow Erase Mac to run?
If yes, then how do I transfer the hard drive back to MacBook?
I know this is a long post, but I want to ensure I'm following the process completely. Thanks,
Scott

Just turn off your wireless router until you can run Time Machine to backup your Mac notebook.
Or remove the drive from the system and connect it to another Mac and copy all your files off it. But again it would be best to disable any and all Wifi systems in your house before you do that.
Not sure but there may be a way to turn off the Wipe command and or it is only issued once. Never had to use it so I'm uncertain on how it actually works.

How do i repair a hard drive?

I bought my ipod at best buy and paid with cash i put the receit in my wallet but i got stolen at the movie theatre the point is that i don't have a recit anymore and don't know how to replace my ipod now. it apears the apple icon with the back lights off then the icon with a ipod sad face apears telling me to go to apple.com/support.ipod and the back light turns on then everything goes off you can hear it that the driver it's working hard to start but it does not turn it on at all i went to the web site that they show i spent more then 2 days reading and doing what they say but nothing works at all. i just wants to know how do i get my ipod back to normal. i went to best buy they told me i have to came here again but since i already did all of this i could not do it again right.they said it needs a new hard drive what do i have to do to get a new one? how much do i have to pay?. i don't know how to get a new hard drive because i don't have the receip.
Ipod 80GB Windows XP

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

How to install Arch from hard drive?

Hello
I have an old laptop - Pentium II 266 MHz, 128Mb RAM and I want to install Arch on it.
The problem is that there is no way to boot from this laptop -> floppy is broken, CD drive is not bootable, no available boot options from BIOS to boot from PXE or USB.
So, I found this link useful (but not enough).
I have done everything as described on the upper link, but on the final step 7 I don't know how to proceed.
What I have got is:
Arch installation CD is in the CD drive.
After loading vmlinuz26 and archiso.img (which is RAM Disk or initrd) it shows this message: "waiting 30 seconds for device /dev/disk/by-label/"
And another message: "ERROR: boot device didn't show up after 30 seconds" and after that it put me in the ramfs prompt.
I try this in ramfs prompt, but without success:
1. ln -s /dev/sr0 /dev/archiso
2. exit (and try again)
What I want is to tell the installer that it must proceed with the installation files on my CD drive.
But how to do that?
If it is not possible, then how could I install Arch on this old laptop? Is there any other methods to try?
PS: There is Windows 2000 and Windows 98 installed on this laptop, but I want to install Arch on it. The whole hard drive is one partition.
Last edited by clovenhoof (2011-08-09 06:49:48)

Try either of the following:
* Add archisolabel=LABEL to the kernel line in menu.lst, where LABEL is the filesystem label of the partition where the ISO resides.
* Add archisodevice=/dev/sdaX to the kernel line in menu.lst, where sdaX should be replaced with the partition where the ISO resides.
[Edit]
Hmmm, sorry I think I was wrong. With the above, you need also extract the ISO, put the arch/ directory at the root of the partition.
Alternatively, you can put the ISO to the root of that partition, and add img_dev=/dev/sdaX and img_loop=foo-bar.iso. For details, see:
https://projects.archlinux.org/archiso.git/tree/README
BUT even if it loads, I don't think you will be able to install Arch on the same partition since it's mounted readonly to /bootmnt, (unless, you explicitly add copytoram to the kernel line, in which case, everything is copied to RAM, but since the machine has got only 128MB of RAM, this is not gonna happen). So, you need to put the ISO (or the extracted squashfs images) to a different partition than your target installation partition...
There probably are other things I'm missing... Gotta say this sounds quite challenging.
[Edit2]
Bah! Try archisodevice=/dev/sr0 then!
Last edited by lolilolicon (2011-08-09 07:48:17)

How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?

How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
CS 5.0 launches the internet browser. > TO SLOW I DONT WANT THIS.
CS 3.0 uses the local help files > I WANT THIS FOR 5.0.

You're not speaking to the right forum for your request. Help is a Suite-wide feature and here is the forum where the Help application is discussed, and where the proper Adobe people hang out:
Community Help Application

How can I remove the hard drive from an iMac g4 before recycling it?

How can I remove the hard drive from an iMac g4 before recycling it?

There are take-apart guides online. For example
http://www.xlr8yourmac.com/systems/imac_g4/imacg4_takeapart.html
However, you can also consider securely erasing the hard drive instead. You can do this using a Mac OS X installation disc with a version that your iMac G4 can boot from the optical drive. If this is a viable option, please post back (include Mac OS X version on installation disc).

I have a late 2008 Macbook Pro last updated to Mavericks OS. The screen died and it's not worth replacing. How do I remove the hard drive and use a drive sled to access info I need?

I have a late 2008 Macbook Pro last updated to the Mavericks OS. The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model. I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need? What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases. How can I accomplish this?
My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive. Is there a way to just access just my hard drive without interfering with hers?
I know this is lengthy. Thanks to whoever looks at this and offers advice/instruction.

the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later. A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files.

How come my hard drive is not showing up on the desktop?

How come my hard drive is not showing up on the desktop?

Those are preferences you speify from INSIDE The Finder:
Finder > Preferences:

New MacBook pro how do I add external hard drive which has my entire iTunes library on it. Do I just drag external drive icon into iTunes preference box that shows where new itunes library is now located ie. On the MacBook pro.

how do I add external hard drive which contains my entire iTunes library to new MacBook Pro. i want to keep iTunes library on external hard drive. But I want all my iTunes information: artist, songs, albums, playlists on my new MacBook Pro. I know about going to iTunes preferences- advanced-itunes media folder location. At this point I don't know what to do Do I drag external icon into iTunes media folder location box. I want to keep music files on external hard drive. I don't want to use macbook pro memory for my very large music files.

I will request that your query be relocated to the iPhoto forum where knowledgeable iPhoto users will be able to assist you.
Ciao.

HT201250 how do i add external hard drive to my time machine back up

how do i add external hard drive to my time machine back up so that I may view the files independently on apple tv please?

To elaborate on above. I am looking to add about 300gig of photos on an external hard drive to TC.
Once I do this I believe I can then have itunes source its photos from TC without having them stored directly on my iMac?
Then I am assuming once I keep itunes on with home sharing I can stream these photos through Apple TV?
My inital problem is getting the photos onto TC in an individual folder not just a backup folder....is that possible or what would you suggest please?

HT1635 How do I know which Hard Drive to get for my MacBook 2006? The old Hard Drive is a Toshiba (MK8034GSX) S/N Z6APT2XUT 9H5 EC. A?

How do I know which Hard Drive to get for my MacBook 2006? The old Hard Drive is a Toshiba (MK8034GSX) S/N Z6APT2XUT 9H5 EC. A?

I've put a 250gb 7200rpm drive in an Early 2006 with no problems.
For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/HDE-SATA-Hard-Drive-Enclosure/dp/B001AAVA08/ref=pd_bxgy_pc _text_b
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

How do you know a hard drive is bad?

how do you know a hard drive is bad?

From the OS X "Help" system:
Check whether a disk is about to fail
You can check the health of many disks in Disk Utility. Many disks include Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T) hardware, which lets a disk test itself for potential problems.
Open Disk Utility.
Select the disk in the list at the left.
If you see a message saying the disk has a fatal hardware error, the disk has an irreparable hardware problem that can’t be fixed by Disk Utility or any other utility that repairs software problems. Back up as much of the data on the disk as possible, and then replace the disk.
If you don’t see a message saying the disk has a hardware error but you still have problems with the disk, you can try to repair it with Disk Utility.

How do I access external hard drive connected to AirPort Extreme via iPad

Hello,
How do I access external hard drive connected to AirPort Extreme via iPad / windows laptop.
I donot have a Mac and I use windows laptop.

For your iPad, you will need an app, like FileBrowser, to access the external drive.
For your Windows laptop, you would access the drive like any other network share. The basic format is: \\<servername>\<sharename>, where, in this case, the servername is the base station name and the sharename is the name of the external drive.

How do I ensure my hard drive is not partitioned?

Similar Messages

Maybe you are looking for