How do I enter a hexidecimal password on my ipad?

Can I enter a hexidecimal password on iPad to gain access to the Internet. I have already tried putting an x at the front of the character string but that didn't work.

I use WEP at home and it requires a hexadecimal password (key).
- A 64-bit WEP key is usually entered as a string of 10 hexadecimal (base 16) characters (0-9 and A-F)
- A 128-bit WEP key is usually entered as a string of 26 hexadecimal characters. 26 digits of four bits each gives 104 bits; adding the 24-bit IV produces the complete 128-bit WEP key. Most devices also allow the user to enter it as 13 ASCII characters.
I use the 64 bit since I have a legacy device that only works with that.

Similar Messages

HT201320 How do I enter a new password into my ipad mini?

My BtYahoo account was "compromised" on the evening of 4th Feb......it affected tablets etc. As requested by BT Internet I changed my password and did all the other listed checks without finding anything untoward. I can use my desktop and iphone, but I don't know how to put the new password into my ipad mini. I tried deleting the old password from mail etc in settings, and putting the new one in, but still can't send mail. I'm assuming the password is the problem....I'm sure that there must be a correct way of changing it that I haven't discovered. Help please! Ariesowl

I'm not familiar with BtYahoo specifically, but generally speaking, there are two passwords for an email account. One is for receiving and one is for sending email. Check Settings > Mail, Contacts, Calendars > [your email account] > [Advanced --- or outgoing mail server]
... and look for a password in that area.

How do I enter my administrator password in Terminal?

How do I enter my administrator password in Terminal?

The same as you would anywhere else. The Terminal doesn't display bullets, asterisks, or anything else in response to characters being entered at the password prompt.
(66424)

I have entered the wong password on mi iPad 2 too many times and it says disabled connect to iTunes so when i plug it into the computer , iTunes says pad locked cannot sync until you unlock the iPad but i don't remember the password nor can i put it in

i have entered the wong password on mi iPad 2 too many times and it says disabled connect to iTunes so when i plug it into the computer , iTunes says pad locked cannot sync until you unlock the iPad but i don't remember the password nor can i put it in

You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
iOS: Wrong passcode results in red disabled screen
This will tell you how to restore
iTunes: Backing up, updating or restoring iOS software
If you cannot restore that way, you may have to use recovery mode
iPad: Unable to update or restore

I'm being asked to enter my ID password on my ipad for icloud, but the email is no longer active and reset remails are not being received.

I'm being asked to enter my ID pswd on my ipad 2 for icloud. but the email address and ID are no longer being used, and reset emails are not being received. How can I deactivate this? I have another ID which works fine, but this issue with the old ID is not allowing me to use my ipad. thanks.

If your iPad is signed into an old ID and you are trying to change it, if the old ID is yours, and if it is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Why do I have to keep entering my itunes password on my ipad?

Can anyone offer any suggestions on how to have my iTunes password stored so I don't have to keep entering it after I enter my passcode to begin doing anything? To clarify, I have a passcode set up to begin after 15 minutes of inactivity. Once that happens, when I reopen my iPad, I am requested to enter my iTunes password as well. This wasn't an issue before the last upgrade. I have tried to find the answer on my own but I'm not having any luck.
Thanks for any suggestions on how to eliminate this minor hassle or let me know if I have to live with it.
Karen

Waht version of the Mac OS are you running, and what program do you use to check e-mail?

Opening my Ipad I have an exchange window asking me my password. I'm (almost)sure I type the good one but it doesn't accepIt it. Unable to go around that window so IPad useless. How can I check/change my password with my IPad (stuck) or my home computer ?

Opening my iPad2 I have an "Exchange " window asking me my password. I'm (almost) sure I type the good one, but it doesn't accept it. Unable to go around it, so iPad useless... How can I recover/check my password on my home PC (or make that window disappear ?

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

TS1398 my wifi password changed but I can't find a way to enter the new password on my ipad...it just keeps saying unable to join (since it has the old password in it)

my wifi password changed but I can't find a way to enter the new password....I keep getting a message "unable to join network" (since it has the old password in it)

Thanks!!! I actually used the "reset network settings" process but my guess is that I will now have to re-enter passwords for the networks I use...seems they should have made an easy way to simply change a password for a specific network since a lot of folks change them regularly for security reasons....thanks for the responses!!!

How do I enter a saved password on the log-in page

I am at the log-in page but I don't know how to get Firefox to enter the password - the password has be saved and is in the list of saved passwords - I am flabbergasted that this isn't easily visible and doesn't show up anywhere on help

I use WEP at home and it requires a hexadecimal password (key).
- A 64-bit WEP key is usually entered as a string of 10 hexadecimal (base 16) characters (0-9 and A-F)
- A 128-bit WEP key is usually entered as a string of 26 hexadecimal characters. 26 digits of four bits each gives 104 bits; adding the 24-bit IV produces the complete 128-bit WEP key. Most devices also allow the user to enter it as 13 ASCII characters.
I use the 64 bit since I have a legacy device that only works with that.

How do I enter UserID and password to access my pasworded space on ISP server

I need to view and upload files to my web page space on my ISP server. I can connect using "ftp.(ISP).com but must enter my UserID and password to get to my files. How do I do this in Firefox?

You can prefix the URL with the username to force Firefox to display a connection pop-up.
*http://[email protected]/
*ftp://[email protected]/

How does one enter their personal password in the dashed format required?

I am trying to log into my office imac remotely and cannot figure out how to input my "personal password" in the format provided.
How do you use the dashed display that only offers places to input a couple of letters?

Sorry you are having difficulty, an agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information to help you resolve your issue.

When starting webcenter domain, how not to enter userid and password?

Dear All,
I followed this link http://yonaweb.be/start_webcenter_domain in installing my webcenter domain and I was successful in setting my own webcenter and busy exploring the webcenter spaces.
My only concern is that when I am starting my webcenter domain it always ask for user id and password for the weblogic.
I created a small batchfile for this.
call C:\Oracle\Middleware\user_projects\domains\webcenter_domain\bin\startManagedWebLogic.cmd WC_Spaces http://localhost:7001but how can I get away from typing the user id and password?
Thanks

>
otherwise,you can specify the userid and password in boot properties file of your domain.
\user_projects\domains\dryrun_domain\servers\AdminServer\security\boot.properties.
# Generated by Configuration Wizard on Wed
username={AES}dbjKVafUpVLPvTG04tGl12RJRCaYmU5dmv2Yw=
password={AES}5WHBgndS2Fq2uoiIKKWI+rM2uwTPAYQ0I=
replace the username and password with your credentials.There's a nice tutorial with screenshots describing how to do this here:
http://st-curriculum.oracle.com/obe/fmw/wls/10g/r3/installconfig/enable_auto_login/boot_identity_file.htm#t4

How do you enter a blank password in ssh

im trying to log into an account via ssh, the account has no password and when i hit enter in the prompt in the terminal it just says password again, what do i do
ps no i cant just change the password on the other account

leaving aside the fact that allowing ssh access with a blank password is a monstrously bad idea...
you'd have to enable ssh with an empty password on the computer you are trying to ssh to. It is disabled by default (and a good thing that it is too!). this has to be done by and admin user on that computer by modifying the file /etc/sshd_config. see this link
http://www.osxfaq.com/man/8/sshd.ws
Unless this is done, there is nothing you can do on your end and you won't be able to ssh into that account.

How do you know what the password on the ipad is using itunes

My Ipad is locked but someone told me I can use itunes to figure out the password.

There are two different locking mechanisms: passcode, prevents access to your data, and activation lock, prevents use of device if stolen. You do not want the students setting the activation lock.
If the passcode is set & forgotten , you can reload from backup or wipe ( first typed whip ) the device.
iPhone or iPad locked from incorrect passcode.
If you enter the wrong passcode six or more times, you'll see a message that says Ipad is disabled.
See how to restore from backup. No back up on your computer, click on the triangle before "If you have never synced your device with iTunes, or you do not have access to a computer"
http://support.apple.com/kb/ht1212
http://support.apple.com/en-us/HT1212
The problem arises when someone sets the activation lock which is set by logging onto your apple id then setting the appropriate option. DEP is the preferred preventative. It established your organization as the owner. The student cannot set an activation log.
Undoing the Activation lock
iCloud: Activation Lock
To remove this lock without your apple id and password, you need to contact apple with proof of ownership.
http://support.apple.com/kb/PH13695?viewlocale=en_US
See Texas Mac Man post in
https://discussions.apple.com/thread/6528124

HT1212 ipad disabled, but I can't connect t o iTunes because it's locked. How can I entere my code to unlock my iPad when the it's disabled.

when I try to connect my ipad to my itune account it does not allow me to do that. I've followed the instruction , but keep getting the same result " ITunes could not connect to the iPad because it's locked with a passcode. I have never connected this iPad to This computer.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How do I enter a hexidecimal password on my ipad?

Similar Messages

Maybe you are looking for