How do I enter a multiline signature with Netscape Messenger Express?

When entering a signature using MN express carriage returns are replaced with $. I understand multiline data may be stored that way buth the $'s should be replace with <cr> in the outgoing message.

This works in Mail 4.5, I hope it works in 3.6. Open mail preferences and click on signatures. Either create a new signature, or click on an existing signature. Highlight or enter and highlight the text you want to be the link. Under the Edit menu, select add link. in the box that opens, enter (without the quotes) "http://www.YOUR URL"
I don't know your experience level with html, so where I have YOUR URL you would substitute the name of your website then a slash then the name of your sales page, so the link would look like http://www.mywebsite.com/sales.html
Hope that helps.
...JER
I didn't know how to make the code above not be a link.

Similar Messages

How do I add an email signature with graphic (logo)?

On my iPhone 5 Im trying to add an email signature with logo to my email account.

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access web mail, you need to seek support from your service provider or a forum for that service.
If your problem is with Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/]
or this one
[http://forums.mozillazine.org/viewforum.php?f=39]

How can I synch my Iphone signatures with my mac?

I like to synch my iphone signatures, with thoose from my macbook.
I've arround 20 differnent Signatures for mare than 40 email accounts and I don't like to write all signatures in my iphone. Is it possible to synch them whith my macbook?

If you want to use your phone with your computer, you need to update it to OS X 10.6.8, and iTunes to 11.1. Snow Leopard is US $20 at Apple's online store.
That is, if your Mac meets the requirements for Snow Leopard.

How do i connect my airport extreme with my airport express

how do i link my Airport Express with my Airport Extreme?

Hello Bob -
I have an Apple Extreme (5th Gen) and I have tried to extend my network with an Apple Express Model No. A1264 with the ethernet connection. It does not seem to work, and has crashed my network twice. When I did get it to work, the wireless crawled. When I took the AirPort Express off of the network the speed went back up.
Can this be done to extend the network, as I have the Extreme in the basement where the cable comes into the house, and I have two other floors that need wireless access. Any suggestions for this older model AirPort Express?
Thanks.

How to install a self-signed Digital certificate in messenger express

I have Java Enterprise System 2003 and I can not buy a commercial certificate so I generated a certificate with keygentool from java but I don't know how to install this certificate in the messenger express http server. Could you tell me what config file do I have to change and where to put the certificate?
I can't find documentation about this.

http://docs.sun.com/source/817-6266/security.html#wp13035

How can i add a new signature with PKCS1?

The default sign method of Acrobat is PKCS7,how to change to PKCS1?
Thanks!

Hi,
There are two different tacks you could take here. One way is to set a Seed Value that works on a per signature field basis and the other is to make a change to the registry that works on a general basis. Of course, a change to the registry it's on a per computer basis where as Seed Value, because it's on a per document basis will travel from computer to computer.
If you want to set the Seed Value it's done via JavaScript. Go to http://livedocs.adobe.com/acrobat_sdk/9/Acrobat9_HTMLHelp/wwhelp/wwhimpl/js/html/wwhelp.ht m?href=JS_API_AcroJS.88.1.html#1515776&accessible=true and click the Search button and look for "Seed Value". When it returns, click on "signatrueSetSeedValue" and then scroll down to Example 2 to see how to set the subFilter. You're going to want to use the value adbe.x509.rsa_sha1 as opposed to what is shown in the example.
If you would rather make the change global to the computer then you need to modify the registry (Windows) or plist (Mac). I'll give you an example for Windows, but if you need help with the Mac let me know. Run regedit and then go to HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cPubSec with the following caveats. First, if you are using Reader, as opposed to Acrobat, change \Adobe Acrobat\ to \Acrobat Reader\. The other thing is, if you are using an earlier version of Acrobat change "9.0" to the major version number you are currently running. Even if you were using version 8.1 you would still look for 8.0.
Now that you've navigated to the correct location add the Binary Value "aSignFormat" (without the quotes). Next, edit the value and click into the right side of the dialog and add the same plain text string noted above for use with Seed Value. Please see the attached screen shot (click on the link below to open the picture and then click on the black X to close it). An important thing to note here is the string needs to be NULL terminated. After you've type the plain text string into the right side of the dialog, click into the end on the hex string at the left side and type a zero. You'll note that it adds what appears to be a dot at the end of the plain text string on the right, but it's not really a dot.
I hope this helps,
Steve

How do I enter data in excel with a specified number of decimal points?

I have several inputs that are being written into excel using the "Write to Spreadsheet file" vi. One of my inputs only writes to excel with 3 decimal points. I would like it to have four, how do I change this?

Pop-up on the top input to the "Write to Spead...." labled "Format".
Chnage it from the default of "%.3f" to "%.4f"
Ben
Ben Rayner
Certified LabVIEW Developer
www.DSAutomation.com
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How do I set up digital signature with a common access card?

I am running a Linux machine, and am trying to set up adobe reader on my computer to be able to sign using my a CAC. I can use the digital signature/certificates on the card to access websites in other programs on my computer, so I know it works... having trouble figuring out how to set adobe up to use it.

Download and install AirPort Utility for Windows.

How can I make an email signature with html

I want to do what the question asks.
When I put in the html it shows the code and not the links. Any help is greatly appreciated.
Thanks

Add this:
?cc=[email protected]
You can pre-populate any part of the email. Here's a list of examples: How to Use the Mailto Syntax - Examples

How to get only the lower words with 10g regular expressions?

below is a small test case, but last sql didn't work as I expected, any suggestions?
thank you.
CREATE TABLE tab_regexp_tst ( vtest_col VARCHAR2(50) );
INSERT INTO tab_regexp_tst VALUES ('hakan');
INSERT INTO tab_regexp_tst VALUES ('KEMAL');
INSERT INTO tab_regexp_tst VALUES ('ahMET');
COMMIT;
exec dbms_stats.gather_table_stats(user, tabname=>'tab_regexp_tst', cascade=>TRUE);
commit;
SELECT vtest_col "UPPERS" FROM tab_regexp_tst WHERE REGEXP_LIKE(vtest_col, '[[:upper:]]');
UPPERS
KEMAL
ahMET
SELECT vtest_col "lowers" FROM tab_regexp_tst WHERE REGEXP_LIKE(vtest_col, '[[:lower:]]');
lowers
hakan
ahMET
SELECT vtest_col "just lowers" FROM tab_regexp_tst
WHERE REGEXP_LIKE(vtest_col, '[[:lower:]]') and REGEXP_LIKE(vtest_col, '[[:upper:]]{0}');
just lowers
hakan
ahMET <- ?? :)

Thank you Volder :)
SELECT vtest_col "sadece küçükler" FROM tab_regexp_tst WHERE regexp_like(vtest_col, '^[[:lower:]]+$') ;
sadece küçükler
hakan
SELECT vtest_col "SADECE BÜYÜKLER" FROM tab_regexp_tst WHERE regexp_like(vtest_col, '^[[:upper:]]+$') ;
SADECE BÜYÜKLER
KEMAL

Cannot send Internet Mail with Netscape Messenger 4.2 on Windows 2000 Server

I can send internal mail with all my users and receive external mail, but when I try to reply or send to an external address, they just get SMTP Deffered and never get sent. What am I doing wrong?

Netscape Messaging Server 4.15 is not supported on Windows 2000. Only on Windows NT.
Sorry.

How can I run a vi developed with 7 Express?

How can I run a vi developed with LabView 7 Express on another machine ? Do runtime versions exist ?

Apparently, you want to run it on a machine that does not have LabVIEW installed.
To make a standalone executable of your LabVIEW program, you need to have the Application builder (included in LabVIEW professional and higher, avaliable as an add-on for base and full).
To run the application, the target system need to have the LabVIEW 7.0 runtime installed (available as a free download).
There is also the LabVIEW Player. In this case you need to digitally sign your VIs and there are a few limitations. It is meant for for sharing code ideas and is not a viable substitute for the appl
ication builder.
Of course you could also get a second copy of LabVIEW.
Some other options that would work in a very narrow set of situations: Read your LabVIEW license agreement. Under certain conditions you are allowed to install a second copy of LabVIEW on your home computer. If this is for personal educational use only and you qualify, you could also buy the LabVIEW student edition.
LabVIEW Champion . Do more with less code and in less time .

How do I pay for skype credits with my American Ex...

How do I pay for skype credits with my American Express prepaid card?

Hi,
To buy Skype Credit, please visit:
http://www.skype.com/intl/en/prices/skype-credit
Additionally, you may check the payment methods available in your location, click this link:
www.skype.com/go/ways-to-pay
Hope this helps.
Julian

How to enter 2nd Electronic Signature?

We recently instituted electronic signature for our Engineers using Acrobat X Pro and a third party certification. The plan is for the first engineer to sign the PDF document and email it to the second engineer for his signature and approval. The system works well when we convert a Word document to PDF, which shows the PDF Producer (File => Properties) as Adobe PDF Library. However, when we use an interactive Acrobat document generated by our publications department, it shows the PDF Producer as Adobe LiveCycle Designer ES 9.0. With the latter document, the first engineers can sign the document, but in the "Sign Document" dialogue box the "Lock Document After Signing" option is not available. As the result, the document is locked by the first person who signed it and the second person cannot sign it.
Is there an option to select to enable the second person to sign the document if it is generated by Adobe LifeCycle Designer?

George,
Thank you for your reply. We ended up creating actual signature fields in Adobe LiveCyle on the documents and routed them to our engineers for their signatures. It worked great.
Date: Wed, 2 Jan 2013 17:29:16 -0700
From: [email protected]
To: [email protected]
Subject: How to enter 2nd Electronic Signature?
    Re: How to enter 2nd Electronic Signature?
    created by George Johnson in Security & Digital Signatures - View the full discussion
I suspect you're dealing with a dynamic XFA form and attempting to place an additional signature, as opposed to signing a preexisting digital signature field. It should work if the form has as many digital signature fields as will be needed. It won't otherwise. Note that if the form is a dynamic XFA but it doesn't need to be (e.g., because you're not adding or autoexpanding fields at run-time), then you might be able to create it as a static XFA form and then users will be able to place as many signatures as is needed.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4963577#4963577
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4963577#4963577
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4963577#4963577. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Security & Digital Signatures by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How can i make a soft return with pages shift enter does not work!

how can i make a soft return with pages shift plus enter does not work!!

On full keyboards with a numeric keypad, the key above the right shift is "return" & the one on the numeric section is "enter." On a Mac (or Apple IIgs ) they do have separate functions. On the "mini" keyboards, both names are on the same key, but "enter" is written in smaller letters. I'll have to check to see how that works on another Mac later today.

How do I enter a multiline signature with Netscape Messenger Express?

Similar Messages

Maybe you are looking for