How do i enter a sony tv wireless pin code into airport extreme?

How do I enter a sony tv wireless PIN code into airport extrme / time capsule?

If you have upgraded to Lion 10.7.3, you will need to download and install AirPort Utility 5.6 for Mac OS X Lion
If you are still using Leopard or Snow Leopard, you can use the version of AirPort Utility that is already installed on your Mac
Open Macintosh HD > Applications > Utilities > AirPort Utility
Select the AirPort Extreme
Click Manual Setup
Shift the focus of your eyes away from the window in the center portion of the screen and move the focus all the way up to the very top of the screen where the Help, Window, Settings menus are located
Click on the Base Station menu
Click Add Wireless Clients and proceed

Similar Messages

  • How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

    How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

    This Apple support document provides good general information on configuring different types of neworks using multiple AirPort routers.
    http://support.apple.com/kb/HT4145
    In particular, you would want to focus on the information regarding a "Roaming Network"

  • Can i use another router to extend my wireless network of my airport extreme?

    i have a billion router (moddel BiPAC 7300W) I just got myself the airport extreme, i want to use the extreme as the main router and extend the network using the billion router.
    steps i have followed on the extreme is as follows:
    INTERNET
    connection sharing: Distrobute a range of IP addresses
    cofig IPv4:set to my home network range(manually) - ip,subnet,router,dns
    DHCP
    access control: mac address of billion router set to all day every day
    steps i have followed on the billion router:
    disabled NAT
    disabled DHCP
    ethernet address: same range as extreme ip, actual ip op extreme is xxx.xxx.xxx.254, on billion xxx.xxx.xxx.253
    disabled RIP
    set wireless mode to 802.11b+g+n
    channel id: auto
    channel width:20/40mhz
    disable wps
    disable vmm
    Wireless Distribution System (WDS) - added the 3 mac addresses the utility displayed, 5ghz and 2.4ghz and also the ethernet.
    restarted both routers, not picking up all the devices connected to the network.
    can any one please help me?

    i want to use the extreme as the main router and extend the network using the billion router.
    Unfortunately, WDS was never adopted as an official standard in the industry, so very few routers from other manufacturers are known to be compatible with Apple's WDS settings. The known devices are as follows:
    Belkin F5D7230-4 and F5D7231
    BT Voyager 2091 or 2100
    Buffalo WGR-G54
    Linksys WRT54G or WRT54GS (through version v4)
    Netgear WGR614 v6
    Thompson 585v6 wireless router (40 bit WEP works but stronger encryption does not)
    connection sharing: Distrobute a range of IP addresses
    You would not use this setting unless your service provider has furnished you with a specific range of IP addresses to use for your devices. Is that the case?
    Normally, when the AirPort Extreme is functioning as the "main" router, the setting for Connection Sharing is set to "Share a public IP address"
    Wireless Distribution System (WDS) - added the 3 mac addresses the utility displayed, 5ghz and 2.4ghz and also the ethernet.
    You indicated that you had configured things this way on the Billion router. But, you did not indicate whether you had set the Wireless Mode for the AirPort Extreme to "Participate in a WDS Arrangement".
    If you have not already done so, this might improve your chances of establishing a connection between the AirPort Extreme and Billion router for the WDS.
    To access these settings on the AirPort Extreme, you would need to open AirPort Utility and click Manual Setup. Then click the Wireless tab just below the row of icons. Change the setting for Wireless Mode to "Participate in a WDS Arrangement".
    Note....you may need to hold down the option key on your Mac, (or it might be alt or control if you are using a PC) to display the WDS setting.
    Once you do this, then a WDS tab will now appear next to the Wireless tab. Click on the WDS tab to set up the AirPort Extreme as the WDS Main and enter the MAC address of the Billion router.
    As I mentioned previously, it is extremely unlikely that the Apple and Billion devices will be compatible for WDS, but probably worth a try....since  you never know when something just might work.
    Even if it does....WDS operates only at "g" wireless speeds, so you will lose any of the faster "n" speed capabilities of the AirPort Extreme in this type of setting.
    Please post on your results.

  • I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too..

    I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too. Any ideas? I'm guessing the only way is to do what I've seen in these community pages which states that it can be done but it will drop the bandwidth by 50%. Thoughts?? Thanks!

    The Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
    The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
    Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
    WDS network
    If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
    The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
    At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed.

  • How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

    How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

    Thanks for the additional information.
    Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
    Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
    If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
    If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

  • How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?

    How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?
    I have an external hard drive attached to my Airport Extreme and I can access it just fine through Finder.  I would like to be able to keyboard navigate to it in an efficient manner.  I tried to use the "Go to the folder" feature but was unable to.
    I had tried dragging the drive to the Network folder but the shortcut it created does not lead to the drive's contents...it seems to lead right back to the parent directory:
    I hope I explained the question well.  Thank you for all of your help and time in tending to my inquiry.

    Cant you set up "back to my mac" then go to finder preferences and put a check mark under everything under the shared location. Also set up back to my mac on your airport extreme.

  • How do I get my dsl from century link modem to airport extreme?

    How do I get my dsl from century link modem to airport extreme?

    The WAN port on the AEBS is typically labeled as such or it has what looks like a circle of dots above the Ethernet port. You can download AirPort Extreme 802.11n (5th Generation) - Setup Guide.

  • How to add a port for a IP cam in the airport extreme setting? thx!

    I has buy a IP cam, but I don't know how to add a port for a IP cam in the airport extreme setting? (I can see the IP cam in local, but not the internet.) Many Thanks!

    atwoodjordan, Welcome to the discussion area!
    See Steve Newstrum's user tip "How do I use Port Mapping (Part I)". When it talks about giving your Mac a static IP address just substitute camera instead.

  • Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

    Can I use the Ethernet Port  of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
    I have AE 5th gen
    looking to buy (from ebay) the AEX A1264
    Various computers, printers and hubs for the network
    Is this possible to do?

    Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
    Thanks Again.

  • Power Mac G3 Pismo with Airport wireless card in Mac OS X 10.4 won't connect to wireless network  with  newest Airport Extreme Base Station set at WPA Personal/WPA 2 Personal encryption.

    My Power Book G3 Pismo with an Airport wireless card  running Mac OS X 10.4.11 will not connect to my new Airport
    Extreme Base Station using WPA Personal/WPA 2 Person encryption.  The Airport firmware is version 9.52.  From
    posts I've read online at different places indicates the Airport card should support the WPA encryption.  Perhaps the problem
    is the Base Station is using a combination setting and the fault is in the base station?
    Thanks for any suggestions

    Perhaps an inexpensive usb wireless adapter would work as well?
    This is probably the simplest way to get the G3 connected to the wireless network.
    I'll have to read up on getting an express and using it as a wireless bridge as I am unfamiliar with the concept.
    The new AirPort Extreme is broadcasting a wireless signal.
    A new AirPort Express could be located close to the G3. The Express will pick up the wireless signal from the AirPort Extreme, then provide an Ethernet connection to the G3 though a short Ethernet cable. 
    This can work very well......IF.....you keep the G3 at a fixed location, since it will always be connected to the AriPort Express using an Ethernet cable.
    I do have an old Linksys Wireless G router.  I wonder if that would work?
    In theory, yes. But it would have to use much older WEP "security", which is easily cracked in minutes using free tools available on the Internet. So, anyone who really wanted to get on the network could do so. It's an option, but not a very good one.

  • My iMac is able to use my wireless internet from my airport extreme, however, no other devices(iphone, ipod) will connect. The network shows up, but the indicator just spins without ever joining.

    My iMac is able to use my wireless internet from my airport extreme, however, no other devices(iphone, ipod) will connect. The network shows up, but the indicator just spins without ever joining.
    I have tried resetting my airport extreme, creating a new network, etc nothing seems to work.

    I have a feeling you may be stuck in bridge mode there...
    Factory reset the Extreme (so we don't second guess later), and re-set up the extreme using iOS5 on your iPhone.
    Set up your Wi-Fi network with your iPad, iPhone, iPod touch, or Mac.
    http://www.apple.com/airportexpress/features/easy-setup.html

  • HT3728 How do I do a factory reset on a 6th gen Airport Extreme base station (model A1521)?

    How do I do a factory reset on a 6th gen Airport Extreme base station (model A1521)?

    Please check page 18 in your owner's Setup Guide.
    AirPort Extreme 802.11ac - Setup GuideJun 11, 2013 - 2 MB

  • I have a dell deshtop about 3 months old i want to connect it to a wireless network from an airport extreme base i am having no luck please help

    i have a dell desktop computer, i am needing to set it on wireless network using an airport extreme base, i am having no luck please help

    What OS is the Dell running?

  • Will a wireless printer work with airport extreme?

    Will a wireless printer work with airport extreme? Such as an HP Photosmart D110.

    Yes, it will as long as it is within wifi signal range of the Extreme.  Of course, you'll need to go through the printer setup sequence. NOTE:  The D110 is not AIRPRINT compatible, so it will not print from ios operating systems that are installed in mobile devices such as iphones, ipads, ipods.  However, there are Apps that are available for non airprint printers, but their quality and effectiveness are questionable.

  • How to hook up a Sony RF Wireless Headphone

    I want to hook up my Sony RF Wireless Headphones to my television system.  All inputs to the TV -  including Direct TV and various DVD players - are HDMI through a Yamaha Tuner.  The HDMI inputs are digital and there is no analog audio output availabe on the tuner or TV to interface with the headphones.  Do you have any suggestions on how I can hook up the RF wireless headphonees to my system?
    Solved!
    Go to Solution.

    Thank you for your post and welcome to the forums.
    The Sony Wireless RF headphones should have a base where the headphones attach and charge. The same base should have RCA inputs(RED/WHITE) where the RCA from the TV AUDIO OUT should be placed. The TV must have AUDIO OUT for the headphones to operate correctly. If you need further assistance please contact Sony Support  for any further assistance.

Maybe you are looking for

  • How can I transfer my playlist from old ipod to new ipod?

    I have an 30 gb ipod and would like to transfer my playlist to my 160 gb ipod.  My playlists were not purchased from iTunes, they were added from files from an old computer that does not work anymore.

  • Ipod shows up in My Computer but not in itunes....HELP

    my ipod has been working fine since i got it a few weeks ago. only recently has it been acting up. I connect it to my computer via USB cable and itunes doesnt automatically show up anymore. I then click on itunes icon but my Ipod doesnt show up. i ch

  • Multiple art boards disappear on reopening doc

    Using a Dell PC, Illustrator CS4, Windows XP Pro. I had a one art board document.  To create three additional art boards, I ALT/SHIFT & dragged the initial board.  After finishing my work, I closed the document.  On reopening the doc, I find all of m

  • Sales order status with down payment requests.

    Due to our requeriments, all the invoices created from a sales order has down payment request as billing category. The problem is that the sales order status continues as "Being processed" instead of completed. Is there any customising that makes the

  • How to make more pages

    I did my first fluid layout index.html.  Do I just save that using SAVE AS and give it the name of another page such as contact.html, then save that as learning.html etc... also to make the mobile.css, tablet.css and desktop.css as the instuctions su