How do i erase addresses in the current location screen of the gps

when using gps, how do you erase past locations in the current location screen? thx lajachik

Hi
Has the ability to make chapters in Imovie been taken away?
YES
Is there any easy way of getting this done?
There was a way around by - Moving Movie to GarageBand and add Chapter-marks here. Wheter it still works is above me as I do not have iMovie'13 (vers. 10.0.x)
Yours Bengt W

Similar Messages

How to get the name of the city and state of the current location of the user

Hi all
i need to get the name of the city and state (full address) of the current location of the user.
need help.

The best way to do this is to put the monitor name as a property bag in the script and pass that to your event details. Otherwise, we're looking at querying the database each time the monitor generates an event, and this is overhead that is really not
necessary. The other option, which is just even worse in terms of performance, is to use powershell to query the SDK for the monitor name. Both of these options are not going to be a good solution, because now you need to implement action accounts that can
either query the database or the sdk.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

How to determine the current update level of the system

How can we determine the current update level of the system. uname -a shows the release but how to obtain the update level through a program?
I have this sample program to display the version
#include <iostream>
#include <sys/utsname.h>
#include <dirent.h>
using namespace std;
int main()
struct utsname osinfo;
// Call uname to get system info, then extract strings.
uname(&osinfo);
if (osinfo.machine) {
    cout<<" Machine : "<< osinfo.machine;
if (osinfo.sysname) {
    cout << "\nOS Name : " << osinfo.sysname;
if (osinfo.release[0] != '\0') {
    cout<<"\nRelease : " << osinfo.release;
}My aim is to check if the Solaris box is 5.10 update 4 or not.
Edited by: nidhish9 on Nov 27, 2007 5:11 AM

nidhish9 wrote:
How can we determine the current update level of the system. uname -a shows the release but how to obtain the update level through a program?
I have this sample program to display the version
#include <iostream>
#include <sys/utsname.h>
#include <dirent.h>
using namespace std;
int main()
struct utsname osinfo;
// Call uname to get system info, then extract strings.
uname(&osinfo);
if (osinfo.machine) {
cout<<" Machine : "<< osinfo.machine;
if (osinfo.sysname) {
cout << "\nOS Name : " << osinfo.sysname;
if (osinfo.release[0] != '\0') {
cout<<"\nRelease : " << osinfo.release;
}My aim is to check if the Solaris box is 5.10 update 4 or not.
Edited by: nidhish9 on Nov 27, 2007 5:11 AMIt's in /etc/release...
essapd020-u004$ cat /etc/release
                       Solaris 10 8/07 s10s_u4wos_12b SPARC
           Copyright 2007 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                            Assembled 16 August 2007
essapd020-u004$ It can be processed with some simple commands:
essapd020-u004$ cat /etc/release | head -1
                       Solaris 10 8/07 s10s_u4wos_12b SPARC
essapd020-u004$ cat /etc/release | head -1 | cut -f2 -d_ | cut -c1,2
u4
essapd020-u004$ Best,

How to get the current location text in JTextPane

hi
i want to get the current location text in JTextPane ...iam useing
caretPos = jtpMain.getCaretPosition();
iam geting the current Locations at the same time i want to read the entery current line
i used like this
StartPos=jtpMain.getText();
but iam geting entry data in JTextPane ... how can get current Locatin data ...
pls help me

If I understood your request, what you would like to do is to be able to retrieve Start and End Positions of a given line (a line and NOT the whole content of the JTextPane).
JTextPane is a graphical component that is bound to a logical document. Documents are structured in elements. What defines an element is up to you to decide if you extend your own document but elements are by default paragraphs (runs of text ended by a carriage return '\n' character). So, I think that what you want to do is to retrieve the Start and End positions of the
paragraph over which the caret is currently positionned. Then I think you have got to do the following :
int intStartPos;
int intEndPos;
int intCaretPos;
javax.swing.text.StyledDocument docStyledDoc;
javax.wing.text.Element eleParagraph;
intCaretPos = jtpMain.getCaretPosition( );
//Get a reference to the default styled document bound to the JTextPane component
docStyledDoc = jtpMain.getStyledDocument( );
//Get the paragraph element from the document over which the caret is positionned
eleParagraph = docStyledDoc.getParagraphElement(intCaretPos);
//Get paragraph's offsets
intStartPos = eleParagraph.getStartOffset( );
intEndPos = eleParagraph.getEndOffset( );
hi
i want to get the current location text in JTextPane
...iam useing
caretPos = jtpMain.getCaretPosition();
iam geting the current Locations at the same time i
want to read the entery current line
i used like this
StartPos=jtpMain.getText();
but iam geting entry data in JTextPane ... how can
get current Locatin data ...
pls help me

HT5429 How do I remove items from the "current location/to" list?

In MAPS, how do I remove items from the "current location/to" list?

Hit the book icon and you will see delete all option. I have not found a way to delete them one at a time.

Does "Erase All Content and Settings" remove or retain the current IOS version on the device

I want to give my iPhone 3GS w/IOS 6 to a family member. When I "Erase All Content and Settings", will it remove or retain the current IOS version on the device?

The version that is installed will remain.

My iTunes library is too large for my iPod classic--can I create a separate library so that I can split the current library and sync the distinct libraries onto separate iPods?

My iTunes library is too large for my iPod classic--can I create a separate library so that I can split the current library and sync the distinct libraries onto separate iPods?

- If the Gmail accounts are IMAP one then if the library is erased and then you use the account old email will be redownload
- Easing the library on the MacBook does not effect what is on the iMac. On the other hand if you deleted the messages in the Mail app on the MacBook then they will deleted from all devices.
-See the middle of the following. It would seem to help in your situation
http://www.howtogeek.com/209517/how-to-stop-your-macs-mail-app-from-wasting-giga bytes-of-space/

Powermanager 1.60 has removed the abilty to show the current power consumption in the tray.

Hi,
well the topic says it. Powermanager 1.60 has removed the abilty to show the current power consumption in the tray.
I realy frustrated right now, why the heck did they remove this nice feature?
And this new energy slider is just trash. If i change back to advanced mode, i cant see my current power consumption. Nor in the main battery tab. The field "Current Power" is just blank. And the option in the tray vanished.
What the **bleep** are these guys doing. There was a time i fought this powermanger is the best software ibm/lenovo ever produced, but since the change of the ui, and removing important features. Its unbeliveable.
Especialy if you are on windows xp, this looks like **bleep**, and this "new" gauge desgin, flickers and stops my mouse on hower over the new "Design".
a frustrated,
R61 user.

you should try uninstalling & re install it http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70602
Message Edited by GMAC-R60 on 08-08-2009 12:38 PM
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

The new ribbon user interface in Win 8.1 should display appropriate buttons depending on the currently displayed folder within the explorer.exe window.

To begin with, in file-explorer (.\system32\explorer.exe) normally, the new ribbon user interface in Win 8.1 does indeed display appropriate buttons depending on the currently displayed folder within the explorer.exe window.
But when one re-parents the explorer window handle to any window handle other than 0000 (desktop's window handle), then the UIRibbon fails to do so.
You might ask 'Who does that ?' and I would say no-one usually, however I use BrightExplorer which
is a great little app that gives me a tabbed file-explorer experience.
Now, this app works fine since Windows 7, but with Windows 8 the file explorer introduced the new UIRibbon in its UI. It's that new UIRibbon that gets confused by what I think may be be caused by the re-parenting that BrightExplorer does
to pull a file explorer session into its tabbed control.
This phenomenon relates to Windows 8 + and is observed only by doing the following steps:
Download BrightExplorer from BrightNewWorlds.com by going here: BrightExplorer,
In the address bar go to This PC,
then go to any other folder and note that the UIRibbon is not keeping track of the changing folder selections.
Does anyone out there feel that they can do something about this, or have advise?
Kind regards,
Robert van der Meijden

To begin with, in file-explorer (.\system32\explorer.exe) normally, the new ribbon user interface in Win 8.1 does indeed display appropriate buttons depending on the currently displayed folder within the explorer.exe window.
But when one re-parents the explorer window handle to any window handle other than 0000 (desktop's window handle), then the UIRibbon fails to do so.
You might ask 'Who does that ?' and I would say no-one usually, however I use BrightExplorer which
is a great little app that gives me a tabbed file-explorer experience.
Now, this app works fine since Windows 7, but with Windows 8 the file explorer introduced the new UIRibbon in its UI. It's that new UIRibbon that gets confused by what I think may be be caused by the re-parenting that BrightExplorer does
to pull a file explorer session into its tabbed control.
This phenomenon relates to Windows 8 + and is observed only by doing the following steps:
Download BrightExplorer from BrightNewWorlds.com by going here: BrightExplorer,
In the address bar go to This PC,
then go to any other folder and note that the UIRibbon is not keeping track of the changing folder selections.
Does anyone out there feel that they can do something about this, or have advise?
Kind regards,
Robert van der Meijden

"the current system is not the original system" in uccheck

Hi Friends,
I get a message during the unicode conversion. Can u help me how to rectify this error.And also would be grateful if u can given some links regarding this issue and why this error message is raised.
"the current system is not the original system" in uccheck transaction of unicode conversion.
thank you
chandra

Do you still need help on this?
Please refer to SAP notes that can provide some hints
#997198 UCCHECK: The current system is not the original System
#963311 UCCHECK reports errors on XSLT sources
cheers,
Vincent

Cannot insert selectItems at the current location

I extended the tag <f:selectItems> to return my own collection, but when I try to insert the tag from palette, I get the message "Cannot insert <selectItems> at the current location because the element is not valid at that location." When I insert it there manually, it works perfectly. How does the editor know, that it is not appropriate? (Or how to tell it that it is appropriate?)
I use JDev 10.1.3.0.4 (SU5)
Viliam

I guess I should make this a more broad question...
how can I display an XML file on a jspx page? specifically, inside an oracle ADF facet?

Hyper-v replication Error Hyper-V received a digital certificate that is not valid from the Replica server 'burstingreplica'. Error: A required certificate is not within its validity period when verifying against the current system clock or the timestamp"

Hi,
When trying to initiate hyper-v replication from the main server i'm getting this error in the event logs.
Hyper-V failed to enable replication for virtual machine 'RECADemo': A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file. (0x800B0101). (Virtual Machine ID 561591B6-567C-...)--I'm using certificate based auth and cert is installed/recognized on both machines.Please help.Thanks,Jaffer
Jaf

Hi,
This error occurs because the Microsoft Certificate Trust List Publisher certificate expired. A copy of the CTL with an expired signing certificate exists in the CryptnetUrlCache
folder. Please try to renew the Trust List Publisher certificate.
The related KB:
Event ID 4107 or Event ID 11 is logged in the Application log in Windows and in Windows Server
http://support.microsoft.com/kb/2328240
How to Renew the Site Server Signing Certificate (Microsoft Certificate Services)
http://blogs.technet.com/b/configmgrteam/archive/2009/02/11/how-to-renew-the-site-server-signing-certificate-microsoft-certificate-services.aspx
Manage Trusted Publishers
http://technet.microsoft.com/en-us/library/cc733026.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

When I open a new window, the current window is closed. I would like to keep the current window and open the new window without losing my current window. I checked "Open new window in a new tab instead" under tabs

When I open a new window, the current window is closed. I would like to keep the current window and open the new window without losing my current window. I checked "Open new window in a new tab instead" under tabs
== This happened ==
Every time Firefox opened
== Noticed yesterday, June27, 2010

i just went into preferences, deleted what was in the home page, and entered a new home page address which solved the problem,

Display the Current Running Files in the Label Control

I have a label control in Windows Form Application, and i have the application to display the building and progress of the projects in the label control using C# code. Along with the update of the label, the progress bar should also show progress simultaneously,
according to the building of the project. How should i do this ??
Thanks.
Tanmay

Hello All;
I want to know how can i display the current running project in the label control along side the same, i want to display the progress of the files that are build successfully through a progress bar.
What i need to do is when i click the button named as "Build" in the GUI it will display the selected projects to build from the CheckedListbox into the label control placed in the GUI.
Please, provide me some hint regarding the same.
Thanks.
Tanmay
Hello,
It depends on what your application is and how you build these files, if possible you could share them with us.
The most common way to display the progress, is to set the text for that label before or after we execute the line building these files.
You could place the lines setting the text or change the progressbar.value before or after the building lines.
Here is a simple sample using progressbar with a backgroundworker.
http://stackoverflow.com/questions/12126889/how-to-use-winforms-progress-bar
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Applescript to get the current insertion point of the cursor

How do I use Applescript to get the current insertion point of the cursor in a Apple pages.app document?

Oops, missed that one - you are correct, the line should be:
<pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto">set {TheStart, TheEnd} to character range of the selection</pre>
I have a wrapper script that I use to insert stuff from my handler/code library into a Script Editor document, and was adapting snippets from that for my examples - I guess that one got away.
As for the dictionary, some applications just have poorly written or outdated documentation. Some of the items have multiple entries (eg, there may be a selection object for the application and also for the document), and some inherit properties from other items. Some are used as nouns, others as verbs (or both). Sometimes it is easier to visualize the item by keeping track of it's reference - the 'some property of document 1 of the current application' thing. You can use the Script Editor's Event Log to see the results of various properties and commands - for example, the above script will result in the following entry (your numbers will vary depending on the selected text):
<pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto">tell current application
get character range of selection
{50, 50}
end tell
</pre>
You can also use the 'log' statement (eg, 'log MyVariable') to add your own entries into the log instead of using dialog boxes.

How do i erase addresses in the current location screen of the gps

Similar Messages

Maybe you are looking for