How do I even out the levels?

I have a video clip that has audio levels all over the place. I am wondering if a filter exists that will lift all the quiet stuff up to the louder stuff without raising the level of everything.
I thought that that was was 'normalizing' does. I tried doing it in SoundTrack, but no dice. Maybe I'm using it wrong.
Any help/suggestions would be much appreciated

You're probably thinking of a compressor. That will reduce the louder parts and can even out dynamics, but trying to make it even out wildly varying levels will probably end up having some very compressed parts and others not compressed thereby damaging the sound more than helping it.
If they are big sections you should try to use volume automation to even them out. Click E on the track in question and create breakpoints in the volume envelope, and reduce the volume on louder sections and raise it on lower ones.

Similar Messages

How do I even out the volume for songs in my playlist?

How do I even out the volume for songs in my playlist? Can I tell somewhere what the volume level is for each song and then change it so all the songs are the same, then re-synch?

Hey Eegee
I would turn on Sound Check to level out the songs. You do this by going to iTunes Preferences > Playback Tab > Check Sound Check.
iTunes: About Sound Check
http://support.apple.com/kb/ht2425
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How can you even out the skin tone/color from a raw photo on photoshop or bridge?

Hello all,
I am trying to figure out how to even out the skin color, I have a picture of a model, unfortunately due to light and make up and her skin color the color of her face and her hands and body dont match, I think I saw a video on youtube where the skin color was evened out throughout the picture from raw I think this was done on bridge but I am not sure.
any one can please explain how to even out the skin color eitther on PS or bridge?
I currently have CS5 on a win 7 pc.
many thanks

There are any number of resources on portrait touchup. Start by googling.

How can I even out the volume levels of my audio?

Hi,
I'm fairly new to FCE and to editing in general.
I've got a clip which contains a conversation, my camera is pointed at one of the speakers and their side of the conversation is significantly louder than the other.
Is there a filter I can use to make the loud side quieter and the quiet side louder in order to hear both sides of the conversation at roughly the same volume?
TIA,
Rob.

Hi Rob,
I asked a similar question recently, and though I ended up concluding the easiest thing was to just adjust the volume manually as Ian suggested, you can take a look at the suggestions I was given about possible filters and such here: http://discussions.apple.com/thread.jspa?threadID=1564173&tstart=0
Hope that helps; good luck!
Claire

How do I even out the pitch bend at the beginning of a note with midi?

Midi being me not using a keyboard. o.o
Thanks.

Yeah, it's not there.
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
I'm not using a Keyboard either though.
doesn't matter

I Need to Even out the Sound Level from Tune to tune

This is the problem I'm facing ....
After recording a number of tunes ... and then burning them in iTunes ... I'll find that the ouput level changes from tune to tune.
For example ... one tune's overall sound level is too low compared to the next one.
When I'm mixing I of course try to have the master output as high as possible without clipping.
I have been using Fission to normalize each tune individually ... but
Is there a way to even out the levels from tune to tune. Of course i have "Sound Check" marked in iTunes preferences.
Here is a strange but true story ...
Someone took one of my disks with this problem .... went to a Sony store where they copied it ...
and the sound levels are more even I swear. Is there some sort of software in cd copiers that can do this?
Thanks ......

Here are a couple of articles that give a useful overview of Mastering:
Preparing Your Music For Mastering
Mastering: How The Pros Do It
Other than that, the Normalizing you're doing is the easiest way to even out the relative levels.
WH

How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi?

How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi? There is probably a trivial, easy way to get this info, but I have not yet found it! Thanks..

Or if you want to grab all the paths programatically, try the attached VI.
Open the top level that you want all the paths from and close all others, then open the
attached and run it. It will return an array of all the VIs that the VI
in question uses, including vi.lib VIs. You can filter these as well if
you like.
Ed
Message Edited by Ed Dickens on 08-01-2005 07:01 PM
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
Get all paths.vi ‏29 KB

How can I find out the overall time and not only the time of a single clip?

I have set up two cameras in one room. Both cameras record the same thing from different perspectives at the same time. I have found an interesting scene for video 1 (recorded by camera 1). Now I would like to find the time at which the interesting scene takes place in video 2.
However, I have not seen any way to get displayed, at what time the scene starts in relation to the total length of the video (e.g: scene starts after 5 minutes from total 10 minutes).
The indicated time refers only to a part of the clip and not to the overall project, even if a special clip is not selected. Does anyone know, how I can find out the time?

Go to Settings>iCloud>Storage & Backup. It will be shown just below the Back Up Now button at the bottom.

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

HT4356 I don't have wireless printer. How can I print out the document?

I don't have a wireless printer. How can I print out the document from regular printer?

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

Help! How can I take out the mini-disc stuck in mac?

Help! How can I take out the mini-disc stuck in mac?
I insert it into the mac, but the OS cannot load the disc and the disc cannot be ejected even i pressed the "eject" button.

This happened to a family members macbookpro. A mini-cd inserted, couldn't be mounted or ejected by the drive.
I cut a rectangle from a cereal box about two inches wide and 6 inches long. Abour an inch and half from one end in the middle I cut a notch and bent it down a little.
I................I
I................I
I....I__I....I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I________I
I then inserted it slowly into the drive notch down and slowly pulled out. I did this few times and caught the mimi-cd and removed it. The drive has worked flawlessly for several years
A few days after this happened I was in BestBuy and an Apple rep was there displaying new Apple products. I asked him about it and he said they have a tool that ***** it out.

How can i find out the table hierarchy

Hi experts,
I have one doubt. how can i find out the table hierarchy in the particular schema.
Let me explain my requirement in detail.. In my Database i have nearly 250 table each table have it's own temporary table(for authorization purpose we are maintaining the temporary tables) for each day i have to clear the temporary table data.
All temporary table connected with each other. i mean all the table having foreign key relationship.. while i attempt the delete the data from the temporary table it showed ORA-02292: integrity constraint violated - child record found.
So can any one please tell how can i delete the child table record first and then parent record table record.
Thanks in advance
Arun

CREATE OR REPLACE FUNCTION get_child_tables (
ptable VARCHAR2,
powner VARCHAR2 DEFAULT 'SCOTT',
plevel NUMBER DEFAULT 10
RETURN stringarray
-- -- create this ON SQL*PLUS "CREATE OR REPLACE TYPE STRINGARRAY AS TABLE OF VARCHAR2(50);"
-- AUTHID CURRENT_USER
PIPELINED
AUTHOR DATE VERSION COMMENTS
======================================================================================
[email protected] 26-OCT-2009 1.0 Developed to ease developers effort to find Nth level of Referential integrity
======================================================================================
-- PURPOSE -> To find PARENT=> CHILD relational TABLE(S) in Oracle upto a depth max N Level.
--SYNTAX TO USE
SELECT * FROM TABLE( get_child_tables('DEPT','SCOTT',3)); Store this query in a file for your use
SELECT * FROM TABLE( get_child_tables('EMPLOYEE')); Store this query in a file for your use
-- RESULTS looks as below
--1 => DEPT
--2 => EMP
--2 => EMP2
--3 => EMP_CHILD
--3 => EMP2_CHILD
-- and so on
--This can be leveraged to use in any oracle database REGION 10g having and above.
--This FUNCTION gives formatted result of the Oracle 10g Hierarchical query result coded in the cursor
--to find MASTER => CHILD relational TABLE(S) upto a depth max 10 Level.
--The result of the PIPELINED function can be retrieved using Oracle new operator
--TABLE(array name) in SQL query.
--Due to the AUTHID CURRENT_USER compiler directive any user can use based on his/her access privileges on the database.
--GRANT EXECUTE ON SCOTT.get_child_tables TO PUBLIC;
--CREATE OR REPLACE PUBLIC SYNONYM get_child_tables FOR SCOTT.get_child_tables;
IS
atname stringarray := stringarray ();
-- create this ON SQL*PLUS CREATE OR REPLACE TYPE STRINGARRAY AS TABLE OF VARCHAR2(50);
vlevel NUMBER;
vtname VARCHAR2 (50);
nindex NUMBER := 0;
bprocessed BOOLEAN := FALSE;
CURSOR c1 (powner_in IN VARCHAR2, ptable_in VARCHAR2, plevel_in NUMBER)
IS
SELECT LEVEL, LPAD (' ', (LEVEL - 1) * 2, ' ') || pt AS "TNAME"
FROM (SELECT a.owner w1, a.table_name pt, a.constraint_name c1,
a.r_constraint_name r1, b.owner w2, b.table_name ct,
b.constraint_name c2, b.r_constraint_name r2
FROM all_constraints a, all_constraints b
WHERE a.constraint_name = b.r_constraint_name(+)
AND a.owner = b.owner(+)
AND a.owner =
UPPER (powner)
-- Change Owner here while testing
--AND A.r_constraint_name IS NULL
AND a.constraint_type IN ('P', 'R')) v1
START WITH pt =
UPPER
(ptable)
-- Change your master table here while testing the QUERY
CONNECT BY PRIOR ct = pt AND LEVEL <= plevel;
-- Change lavel here while testing
BEGIN
atname.EXTEND;
atname (1) := 'NOTHING';
OPEN c1 (powner, ptable, plevel);
LOOP
bprocessed := FALSE;
FETCH c1
INTO vlevel, vtname;
IF nindex > 1 AND atname (atname.LAST - 1) = vtname
THEN
--DBMS_OUTPUT.PUT_LINE('2 ==== vtname ' ||vtname || ' '|| atname.count|| ' '||atname.last || ' '||atname( atname.last-1));
bprocessed := TRUE;
END IF;
IF NOT bprocessed
THEN
nindex := nindex + 1;
atname.EXTEND;
atname (nindex) := vtname;
PIPE ROW (vlevel || ' => ' || vtname);
DBMS_OUTPUT.put_line ( ' **** nindex - atname( nindex) '
|| nindex
|| ' - '
|| atname (nindex)
DLOG('ADDING ',vTname); A LOGGING ATONOMUS PROCEDURE FOR DEBUG PURPOSE
END IF;
EXIT WHEN c1%NOTFOUND;
END LOOP;
CLOSE c1;
FOR i IN 1 .. atname.COUNT
LOOP
DBMS_OUTPUT.PUT_LINE('atname (i) ' ||atname (i));
END LOOP;
RETURN;
EXCEPTION
WHEN no_data_needed
THEN -- THIS EXCEPTION HAS TO BE THERE TO GET THE FUCTION WORKABLE
DBMS_OUTPUT.put_line (SQLERRM);
RETURN;
--SELECT * FROM TABLE( get_child_tables('TB_XOP_LETR_TEMPLATE','OPS$CMS',5));
END get_child_tables;
Edited by: user3066657 on Jul 21, 2011 8:42 AM
Edited by: user3066657 on Jul 21, 2011 11:26 AM

How can i find out the size of video on my iphone 5?

How can i find out the size of video on my iphone 5?

As far as I've known, all iPhones (3G/3GS/4/4S/5) sold in China (probably only in China) have this low battery alert sound.
So called "localization" or what...
Actually many people found it annoying coz it plays even when the phone is switched to SILENT. However no solution has been found so far
PS: reeeeeeeally hope Apple could see this thread and at least give Chinese users an option to switch it off!!
<Edited By Host>

How we can find out the running window application ?

hi all,
how can i find out the running windows application through my java program?
if anyone know any methods or classes please inform me soon...........
one way to ask is "how one can trap the running window's application through java code"?
Please do inform, if you have any valuable guidelines to achieve this
Thanks in advance

I pretty sure this isn't possible. You could write something which uses JNI to call native methods, but you'd have to have methods avaliable to call. So suppose you wanted a process on a Windows machine to read the text in an instance of IE's address text box you'd first need a way to do this with Windows specific code. And I can't think how you'd do that - unless you are directly interacting with the OS. So I'm afraid there is no easy way to do this in Java, and even the very difficult way with JNI may not even be possible.

How can we find out the info object in a query ....?

How can we find out the info object in a query is belongs to that particular info cube? If the query is built on a Multiprovider having 4 different info cubes.

Hi,
If you have restrictions at the infoprovider level in the RKF then it is coming from that particular infocube.
Or go to the selection option in the multiprovider...her you can get the mappings of which key figure is populted from which infocube.
For characteristics you will have to look for identification tab in the characteristics option.
Thanks

How do I even out the levels?

Similar Messages

Maybe you are looking for