How do I expand the left panel to see more of my folder names?

Or (alternatively), how do I hide (but not delete) upper-level folders so that my folder names don't get cut off? Here's a screen shot:

gatorjim2000 wrote:
In a word or two, you can't. You can drag the border between the left panel and the viewing area to enlarge the panel, but it only goes so far.
That's not quite true.
You can use Jeffrey's tool to expand the maximum width of the panels, and use narrower fonts if you want:
http://regex.info/Lightroom/Config/

Similar Messages

How can I expand the source panel on the Import dialog window (mac LR3.3)?

Hello,
How can I expand the source panel to the right under the Import dialog window?
I'm unable to drag the seperation line to the right and therefor unable to view folder names when in lower hirarchy...
thanks you
shlomit

Shlomit Heymann wrote:
shouldn't there be at least a scroling bar from left to right? How am I suppose to view my sub folders names?
To a lesser extent, the same problems exists on all panels, whether they be in import window or elsewhere. Just look at the Folder panel in Library to see how much space is wasted in offsetting the subfolders. When this was pointed out to the relevant folk the reply came back that it was by design. Bad design, but we're pi...g into a head wind trying to get it changed.

How do I make the "Find Panel" (Ctrl-F) more ME friendly?

After quickly resolving and only recently glitch in an older Firefox version (17.0.1) concerning stubborn restore of last sessions upon start up, using now version 27.0.1, I am now frustrated with the Find Panel (using Ctrl-F). How do I revert the Find Panel to older (not to mention MORE PRACTICAL!) version? If a visualization is actually necessary, I found a link that may be helpful: http://s11.postimg.org/qsc5piwr7/ff_find.png .
Focusing ONLY on the Find Panel, the version I am looking for is on
the top, while the newer (not to mention INFERIOR!) version can be
found on the bottom.
If I have to get another version, please let it also be able to use the Norton Toolbar, but I would much rather be given the instructions on how to simply edit the version I have now (27.0.1) so as to change only the Find Panel as I described above.
If you noticed, I'm getting super frustrated and also very picky, but as things Mozilla, Google, etc. go on, making what I suppose they call "progress," they all start to diminish in their functions. I'm not looking for a special looking internet browser, but one that works, user friendly, ME friendly. If Firefox has a few bugs to work out, work `em out, but for heaven's sake, stop altering the orientation of tools in the browser, rendering it far less practical than its wiser ancestral versions. I digress though . . .
I'm using Firefox 27.0.1, extremely loathe the Find Panel (Ctrl-F), how can I switch to an older and
better Find Panel (while at the same time also maintianing compatibility for Norton Toolbar)?
http://s11.postimg.org/qsc5piwr7/ff_find.png

Try the following style in Stylish. It's a fair approximation of the previous appearance.
* https://addons.mozilla.org/firefox/addon/stylish/
Once Stylish is installed, open the Add-ons Manager (Ctrl+Shift+A), User Styles category. Click the Write New Style button at the top and paste the following in it. Give the style a name and click the Save button.
<pre><nowiki>@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
.findbar-closebutton {
-moz-box-ordinal-group: 0 !important;
margin-left: 0px !important;
margin-right: 7px !important;
.findbar-textbox {
-moz-box-ordinal-group: 0 !important;
.findbar-find-next {
-moz-box-ordinal-group: 0 !important;
border-left-width: 0px !important;
border-radius: 0px !important;
.findbar-find-next label:after {
content: "Next" !important;
margin-left: 4px !important;
.findbar-find-previous {
border-right-color: rgb(160, 160, 160) !important;
border-right-style: solid !important;
border-right-width: 0.8px !important;
border-radius: 0px 2px 2px 0px !important;
.findbar-find-previous label:after {
content: "Previous" !important;
margin-left: 4px !important;
.findbar-container > spacer {
display: none !important;
}</nowiki></pre>
The Alt+N and Alt+P keyboard shortcuts no longer work for finding the next and previous occurrence, respectively. You can use F3 or Ctrl+G and Shift+F3 or Ctrl+Shift+G, respectively.
If you want the find bar to remain open when switching tabs, you can use the FindBar Tweak add-on.
* https://addons.mozilla.org/firefox/addon/findbar-tweak/
If you want to submit feedback or suggestions, open the Help menu — either from the orange Firefox button or the menu bar — and choose Submit Feedback. This is a support forum and your comment may not get noticed here.

How do I expand the top bar to show more of my theme?

I found a lot of themes that I would like to use but they look dumb when I put them on because the toolbar isn't big enough. I would just like to know if there is any way to fix this.

You can use the Classic Theme Restorer extension to have one extra toolbar.
*https://addons.mozilla.org/firefox/addon/classicthemerestorer/
Another possibility to see more of the Persona is to set a min-height to the navigator-toolbox with code in the userChrome.css file or by using the Stylish extension.
Add code to the <b>userChrome.css</b> file below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
<pre><nowiki>@namespace url("https://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#navigator-toolbox {min-height:200px!important}
</nowiki></pre>
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
*Use a plain text editor like Notepad to create a (new) userChrome.css file in the chrome folder (file name is case sensitive)
*Paste the code in the userChrome.css file in the editor window
*Make sure that the userChrome.css file starts with the default @namespace line
*Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userChrome.css. Otherwise Windows may add a hidden .txt file extension and you end up with a not working userChrome.css.txt file

HT201320 How can I get TRASH to show on my 5S when I slide the email to the right? I see more & Archive

How can I get TRASH to show on my 5S when I slide the email to the left? I see more & Archive

Hi SCAnn!
Here is an article that can explain that feature for you:
iOS: Understanding Gmail Archive
http://support.apple.com/kb/ht4207
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

How to get default presets to the left panel

I finally installed lightroom 3 after many, many months of it sitting on my desk. I have been watching tutorials, and playing around with it, and I have found that the default presets are only on the right side panel in library. On the left panel in develop the heading presets shows up but when I click on the triangle nothing shows up under them. I did see a question already on here to right click on the heading and check it which I did a few times just to see if it would work and nothing. This is very frustrating because I have to click on each preset and undo it if I don't like it. Please help.

Hello!
When I left clicked in the spot shown below,
This field is shown (shown below). As you can see the preset menu is checked, thus the presets being shown.
Is this what you are referring to? when you left click nothing is shown, and nothing is listed under presets?
janelle

How can I expand the gutters in a document created with a Pages brochure template?

How can I expand the gutters/ space between panels on a document created with a Pages brochure template?

You haven't said which.
Each panel is usually just a locked object, unlock them and resize the boxes.
Peter

How do I expand the FaceTime screen to full size?

How do I expand the FaceTime screen to full size?

You should be able to "swipe" the tabs list away. Press with your finger near the line that separates the tab list from the webpage, and drag to the left.

Itunes does not show my audio cd on the left panel

Hi,
I have a Dell Laptop with Windows 7.
When I put an audio CD into the DVD/CD-drive, I can hear the music with every program on my computer except from iTunes.
The audio CD is not shown on the left panel of iTunes.
The CD does not have a copy protection because iTunes on my father's computer does show the CD.
However, when I run the diagnostics, there a no errors. iTunes recognizes even the tracks on the CD etc. - everything is fine.
Only the CD is not shown on the left panel and I cannot hear the tracks of the CD nor rip it.
I have already checked the support sites, I have already checked the DVD/CD-drive filters, reinstalled iTunes, downloaded the latest firmware and the drivers etc. etc. (and everything else what is recommended on Apple's support sites).
Can anybody tell me how to solve this problem?

ctrl S - Show sidebar.

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How do I fix error message "This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options." Which asset is it?

I ab in Muse. How do I fix error message, This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options.

You should ask in Help with using Adobe Muse CC
This Cloud forum is not about using individual programs
This Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

I just loaded the 'lion' now my mail takes a new life....how do i move the reading panel to the bottom / also how do i get rid of the text/content under each mail..two simple things not sure obvious on this version !!!

i just loaded the 'lion' now my mail takes a new life....how do i move the reading panel to the bottom / also how do i get rid of the text/content under each mail..two simple things not sure obvious on this version !!!

How do you set the left hand margin when writing emails. Some characters disappear off of the left side of the page because the margin is so close to the edge

When writing emails the left hand margin is so close to the edge of the page that some characters disappear from view on the left hand of the page. How can I set the left hand margin to not be so close to the left edge of the page?

Oy. You beat your head for hours and finally concede to asking for help, only to solve it two minutes later. Here's the answer.
In the inspector, on the Layout tab, there's a checkbox that reads, "Show Thumbnail Track".
UNCHECK that box and the gutter goes away.

How do you change the workspace panel color in Edge Animate CC (the stage is OK) to a lighter gray, I have the dark gray now. I have Win 7 Pro SP3?

How do you change the workspace panel color in Edge Animate CC (the stage is OK) to a lighter gray, I have the dark gray now. I have Win 7 Pro SP3?

This is a feature as far as I know.
On Sun, Dec 21, 2014 at 10:32 PM, Conquero <[email protected]>

How do I tile the Dreamweaver panels and document windows to tile instead of being superimposed?

How do I tile the Dreamweaver panels and document windows to tile instead of being superimposed?

I'm not sure what may be causing your issue on the right side of the screen, other than possibly your application frame is wider than your screen size so you aren't able to drag the window tab far enough to get the highlighting effect. Make sure your application frame is maximized to your screen by hitting the middle button in the top right of the window so it changes to the double square icon. That way, you'll know whether the edge is off screen or not.
Only certain windows can be brought to the top or bottom since those are reserved for toolbars and the Properties Inspector respectively.

How do I expand the left panel to see more of my folder names?

Similar Messages

Maybe you are looking for