How do I export a .mov file with timecode that matches the timecode on my project's timeline?

Hi:
This seems like it would be an easy thing to figure out, but I'm striking out so far:
I have a long, 10-minute source video (actually a series of 16mm film clips that were telecined to a single 10-bit uncompressed .mov with continuous timecode by a film lab) on my project's timeline.  I need to be able to export small sections of the timeline to individual .mov files--and I need to be able to open the resulting short .mov files in a footage logging application called F5.  I'm currently trying to render these small individual videos as H.264 .mov files, since that's a format F5 can read.  Rendering/exporting the 'work area' selection from my project works fine, so that's no problem.
The problem I'm having is that timecode of the resulting H.264 .mov files don't match the timecode on my Premiere project's timeline--they always start at 00:00:00:00.  I don't want that.  If I render out (for example) a section of 00:05:10:00 to 00:07:00:00 on my project's timeline, I need the exported .mov file's timecode to start at 00:05:10:00 and run to 00:07:00:00, not restart at 00:00:00:00.  Is this possible?
I'm running Premiere Pro CS6.0.2 on a Mac OSX 10.8.2, all updates installed.
Thanks very much.

works using " title" ( cause its alpha ) but doesnt work using black video...gotta jump thru hoops to do it that way..is nuts...so title works fast
so you put cti where you want to start, put title up there above your video, put timecode in, make it " generate" , put start time in, and drag title to the end of your work bar for export...and it should be good...
or of course ann's way is good too

Similar Messages

  • Exporting an .mov file with timecode

    Hi -
    I'm trying to find the best way to export an .mov file from Premiere or Encoder with timecode either burned in (as well as embedded in the file). Right now when I export the .mov files no timecode is coming through. Normally I would be able to read the timecode with the earlier version of Quicktime, and I can see it is just starting at 0.
    I'm trying to export as .mov files so they can be given to transcribers.
    Thanks for any help!
    Elisa

    It get's it from where you tell it to in the effect's settings.  If it wasn't right, correct it.

  • How can I link 1 movie file with several logic projects?

    Hi all,
    I've been  working on the music for a film with a colleague of mine and are sharing logic files via dropbox. 72 cues had to be altered for logisitical reason to work in someone else's studio for the final mix. Since I had a copy of the movie on my machine and my colleague had a copy on his we thought that if we put our movie into the root directory of our logic project's folder then the movie would automatically load up with the projects after we shared them via dropbox. We checked to make sure that both movies had the same filename. Unfortunately this did not work and we had to then reassociate 72 cues individually with each logic project. With such limited time to prepare the cues for the final mix this really took too much time.
    Is there any way in logic (9.1.8) to associate 1 movie file with a number of logic projects quickly, without having to open up the project and select open movie?
    kind regards
    /mischa

    Seems to me that if you both had the movie file in the same location on both of your drives (eg on Macintosh HD at root level, in no other folder) then all the project files would search for this common path and find the file.
    The problem arises when there is even a small difference between path names.
    Unfortunately, this won't help you at this point as all the project files already are associated with unique file paths for the movie. By now, you've probably already done it one by one - but maybe for next time....?
    There's no bulk or quick way to do this.

  • How to save a Photoshop PDF file with fonts that can be detected in Acrobat?

    We created a PDF file using Photoshop CS5, for the purpose of using it as a watermark on documents.  We saved this file as Photoshop PDF file, but for some reason the fonts cannot be detected when the file is opened in Adobe Acrobat.
    We need it to be recognized by Acrobat so that we can easily add the watermark to documents on a regular basis.
    Right now, Acrobat cannot detect the fonts in this file -- even though it is a basic font like Arial -- so when we add the watermark to a document, the fonts in the watermark becomes very degraded in appearance.
    Any advice would be hugely appreciated!

    I've tried several settings when saving as a PDF, to try to produce a file with fonts that can be detected by Acrobat.  I tried the presets listed in guide: Photoshop Help | Saving PDF files
    But none have worked.
    I cannot use PNG because it is not one of the formats that Acrobat allows for a watermark.  And JPG doesn't work because I need transparency.

  • How can I copy or move files with elements 10 organizer ?

    Hello,
    since a couple of days I use Elements10 Organizer under Windows 7 Home.  Since then Im testing how to come along with the product and it's features. Though I had many good impressions of many functions that work excellent I now have severe problems  to organize my workflow. The problem is: I can*t copy or move files or directories with the organizer and worse, I can't find files or directories that where copied, moved or renamed by Windows 7 Explorer even when I import or load the specified directory into the elements10  catalogue again. Off course I understand the elements 10 philosophy to have an image only one time within the data base and to arrange every collecting idea by tags and catagiories. Nevertheless there is a need to have sometimes a copy and also to know where the copy is and to manage it. Right now I find no way to handle these tasks by elements 10 organizer. I am a newbe on photoshop elements.
    I would appreciate if there is anybody who knows a solution to me. Thanks and bye, Woenni

    I am also having this same exact problem. Only some, and not all of the files on my external hard drive will copy. I get the "No Symbol" when trying to copy or move files.
    I am able to duplicate all files. I also can right click on a file and select copy. However on some files, I can't ever paste it (paste doesn't show up or is grayed out), drag it to another folder, or drag-and-copy it to another location or drive.
    The files are not locked and I have read and write permissions.
    The external that I'm trying to move and copy files from is a FAT32. Could that be a problem? How do I get my files off of this drive?
    *PLEEEEASE HELP!*

  • How can I open a .mov file with iMovie?

    Hi,
    I keep trying to open a .mov file in iMovie and it isn't doing it. Is that not a recognized file extension? Should I convert the video file somehow?
    Thanks!

    .mov is just a container for a variety of video codecs, some of which are not recognized by iMovie.  You will need to convert it first with a third party app such as Media Converter (which is free, see:   http://media-converter.sourceforge.net). 
    Another free app  VideoSpec (see:  http://videospec.free.fr) is useful for identifying all the details of a video clip
    Geoff.

  • How Can I export a h264 file with wav audio?

    I'm having troubles to export an edited file in FCPX.
    The final result in audio always go in AAC file and the quality is bad. Is it possible to go in Wav?

    Hi Tom!
    That's what I do... but the sound goes in a AAC and this format it's worst than wav files!
    I think ther's no option to do this in FCPX!

  • How can I get a movie file with no cmpression?

    When I export the sequence in fcp, will I get a full resolution( no compressed image) if it's set on dv/dvcpro?
    also, if I bring this file to toast, how I do know I am compressing it or not since toast makes a dvd anyway?
    thank you!

    if I bring this file to toast, how I do know I am compressing it or not since toast makes a dvd anyway?
    I'm not sure if I understand your question's syntax, but let's assume you want to make a DVD-Video of your program. In doing so, the video and audio will need to be compressed rather heavily (depending on program length/bit rate). Toast, iDVD, Compressor and DVD-SP will all handle the compression/encoding, but among all of those, Toast has one of the lowest quality encoding outputs.
    I'd recommend using a Compressor (for compressing/encoding) and DVD-SP (for authoring and burning) workflow for maintaining the best quality.
    -DH

  • Needing script to move files with name that starts with

    Here is part of the script that takes a excel file for the list to duplicate files from one folder the another. I would like it to use file name starts with instead exact file name. If I can get this to work I will not have to have a try for .jpg and a seperate try for .eps
                tell application "Finder"
                    try
                        duplicate (sourceFolder & theItem & ".jpg" as string) to destFolder with replacing
                    on error
                        do shell script "echo " & theItem & ">> $HOME/Desktop/NotFound.txt"
                    end try
                    try
                        duplicate (sourceFolder & theItem & ".eps" as string) to destFolder with replacing
                    on error
                        do shell script "echo " & theItem & ">> $HOME/Desktop/NotFound.txt"
                    end try
                end tell
    Thanks

    Ok here is the script that I've been using for a couple of years now with no problems, until I upgraded. Don't know what happened, because I cant even use it on a older system that we have. The error I get is when it tries to get the value of selection from Excel. It times out with no values. Thanks for any help!
    set sourceFolder to choose folder with prompt "Select the folder that contains images to move."
    set destFolder to choose folder with prompt "Select the destination folder"
    if sourceFolder is not destFolder then my moveImageFiles(sourceFolder as string, destFolder)
    on moveImageFiles(sFolder, dFolder)
        script o
            property valuesList : {}
        end script
       tell application "Microsoft Excel" to set o's valuesList to value of the selection
        if class of o's valuesList is not list then return -- not multiple selection
        set tc to (count o's valuesList)
        set dFolder to quoted form of POSIX path of dFolder
        set errorFile to quoted form of POSIX path of (sFolder & "filesNotFound or NotMoved.txt")
        do shell script "/bin/rm " & errorFile & " > /dev/null 2>&1 &" -- remove the error file (if it exists)
        repeat with i from 1 to tc
            repeat with thisValue in (get item i of o's valuesList)
                if contents of thisValue is not "" then -- not a blank cell
                    set tFile to quoted form of POSIX path of (sFolder & thisValue)
                    try
                        do shell script "shopt -s nocaseglob; /bin/mv -f " & tFile & "* " & dFolder
                    end try
                end if
            end repeat
        end repeat   
        do shell script "/usr/bin/open -b com.apple.textedit " & errorFile & " > /dev/null 2>&1 &"
    end moveImageFiles

  • Is MOV file with mp2 audio tracks compatible with QT player?

    Hi,
    I export multiple .mov files with certain video stream and mpeg layer 2 audio stream inside, using MPEG Streamclip/VLC/FFMpegX. However it turns out that the sound part is not playbak correctly inside QT player. Is QT player not supposed to playback this kind of file? BTW, I'm on OSX 10.7.3, Quicktime player is version 10.1.
    Thanks,
    Shunan

    I export multiple .mov files with certain video stream and mpeg layer 2 audio stream inside, using MPEG Streamclip/VLC/FFMpegX. However it turns out that the sound part is not playbak correctly inside QT player. Is QT player not supposed to playback this kind of file? BTW, I'm on OSX 10.7.3, Quicktime player is version 10.1.
    Many possible answers here. Since you did not indicated the video compression format, my only recomendation would be to try playback in the QT 7 Player for your specific combination of video, audio, and file container. For instance, "muxed" MPEG-2/MP2 data in an MPEG, MPG, or MOV file container will play correctly in the QT 7 Player. On the other hand, the MPEG and and MPG files only play the video in the QT X Player and the MOV file container will not even open in the QT X Player.
    Basically, if you check the QT X Player web page, you will note that MPEG-1, layer 2 audio is not supported by this player. However, whiile MPEG-1, layer 2 audio is still basically supported by the QT 7 Player, certain audio, video, and file container combinations may be problematic.

  • How do i export a movie as an iso file in ilife11

    How do I export a movie as an ISO file in iMovie11?

    Why? What is your goal?
    http://en.wikipedia.org/wiki/ISO_image
    Toast can do it.

  • I have imported my pictures into aperture, how do I export into jpeg files so i can share files with friends who dont use aperture ?

    I have imported my pictures into aperture, how do I export into jpeg files so i can share files with friends who dont use aperture ?

    If you want the same export settings on some or all of the images you can select all that have the same export requirements and export them as a group.
    If all the images have the same requirements then you can select them all and run the export command.

  • How on can get the plaback of .mov files with Redcode Codecs?

    Hi folks,
    I am not able to play the .mov files created by Red camera so..
    how one can get the playback of .mov files with Redcode Codecs?

    Well, one typically doesn't edit with any of the proxy-files the RED camera produces.  You need to convert the RED footage to ProRes.  Log and Transfer can do this, if you download and install the RED Log and Transfer plugin.  Or you might need to use RED software to convert the footage to ProRes.  But those Red proxy files won't import via log and transfer, and are NOT editable in FCP.  Gotta convert to ProRes.

  • How to open a .MOV file with Maverick?

    Hello,
    I  recorded some videos with my iPhone 4S. i sync it then with my computer, but it says that it can not open them. Why? How can i open .MOV files with my computer (running with Maverick 10.9.4) ?

    Try VLC.
    Video Player - VLC
    More.
    Video Player - Divx
    Video Player – Flip4Mac

  • How do I export a Movie to Quicktime? And do I need to?

    Hello, how do I export a Movie in iMovie 11 to Quicktime, when the option is not listed?
    I have created some short videos with Lavelier Line6 mic, which apparently records your voice in stereo on one track, I am told (although I can't see stereo tracks anywhere within iMovie project, it looks like one track below the picture - but then I wouldn't know what to look for as I'm new to this!).
    I need to, I am told, export the final movie to Quicktime, in order to create a mono track rather than stereo.  I can't see how to do this, as Quicktime is not an option in my Share menu (facebook etc is there, but not Quicktime).
    Could someone advise me whether I need to do this at all?  Is a movie soundtrack automatically converted to mono if there is only one track?
    (Also, there is a small amount of hiss in the recording, which I have removed with background noise reduction, but could that hiss come from the unused track, does anyone know?  And if so, what is the best way to get rid of that track?  Of course, it may not be that at all!   I don't really want to get into complicated removal of audio tracks into other software and then readding to the picture, if I can avoid it.)
    Thanks for any advice you can give.  Fran x

    Use "Share to File".

Maybe you are looking for