How do I export audio only?

I have audio that needs cleaning up beyond what I know how to do and I want to send it off to a friend... the FCP Library is around 133GB so I'd like to just send the audio. How can I do that?
Using version 10.1.4
Thanks.

If you have Compressor, import a batch of your video files at a time into there and export as Audio only - something uncompressed like .aiff files.
It's VERY quick.
If you don't have Compressor, you can create a project in FCP X, drop a load of files onto it, and then Share > Master File (choose Audio only again) .aiff (or similar uncompressed).
You'll need to re-import these files into your projects after they are returned - there are various ways to do that.
Andy

Similar Messages

  • How to create a audio only conference at MCU 5320 .. ?

    How to create a audio only conference at MCU 5320 .. ?

    Hi Hermanus,
    Please, post this question to Telepresence support community as this community is for Cisco WebEx Meetings Server and Cisco Unified MeetingPlace products and is not being observed by TP experts. Hence, you will not be able to get an answer to your questions.
    I hope this helps.
    -Dejan

  • How do I capture audio only, no video?

    I'm trying to capture an audio cassette, patched RCA/XLR to a Kona Card, to a G5 tower running FCP6. Since I want to capture audio only, I unchecked the video box in the clip settings tab of the LogCapture window. But when I capture now, I get a message saying "This operation could not be completed as there is no video".
    How can I capture audio only? Can't turn off the video in Kona ctrl panel, must be in FCP.
    Thanks in advance for the help.

    Yes, as I mentioned, I did uncheck that video box, after which I got the message 'operation could not be completed as there is no video' (& capture failed). My capture setting is to Kona, but I've also tried Generic, but no luck.
    This then led to my first crash course in SoundtrackPro, which is now recording the audio I needed. But I would love to figure out why FCP is not letting me capture audio w/o video, so any further suggestions are appreciated.

  • Exporting Audio Only

    I thought that you used to be able to export audio only from iMovie using share to quicktime with some advanced settings.  I don't see that as an option in the new Mavericks iMovie

    Seriously ? There are no user selectable options for audio exports?
    What the heck is wrong with giving people the ability to accomplish what they want to ITB?
    Maybe this is just a marketing tactic to sell compressor to people who might not otherwise need it.
    I sincerely hope Apple returns audio export options in the next update.
    Bj4mac,
    For what it's worth, you should not have been using 44.1 audio in FCPX.
    Use one of the apps that Tom mentioned to convert to 48. (or QT pro if you still have that from FCS).
    If this is an audio-only task you're attempting, that's all the more reason to use another app.
    Good luck
    g

  • I cannot export audio only as Roles, the render stops midway.

    I'm using FCPX 10.1.3
    I try to export audio only using Roles. The render just stops midway, it never finishes. What's wrong??
    I'm also using X2Pro to generate an AAF file using the same roles. The AAF file comes with errors in the ProTools session. I'm guessing that the same problem that I'm having to share audio using roles is the one messing up the AAF file.
    Help please!

    JCVela is right.
    You don't want to export a master file with multitrack to then do another transcode in compressor. You have to be able to really disable and choose roles for sharing. And still, this doesn't solve the issue of exporting AUDIO ONLY as ROLES. Sometimes it works, most of the times it doesn't.
    For me, it is essential to be able to really turn on and off the audio or video of clips using the roles window for any kind of sharing/export whether it is within FCPX or Compressor and that when you do, that the render actually finishes. As it is right now, the roles tool is only a way to mark your clips and to turn them on and off when you're editing. And this is ridiculous.
    Another thing: can you select clips using roles? For example, I want to lower the volume of all my clips that have the role of Dialogue, in the same amount for all of them. So far, selecting the dialogue role in the role window the clips get highlighted but I still have to select each one of them individually and manually to do the volume change. So, is there a way to select them all by using roles?

  • Quicktime X Exporting Audio only - No Video

    Hello,
    Any MOV file I brought into Quicktime X I used to able to export to 720p, 1080p or 420p to
    a nicely encoded, universal H.264 Quicktime file.
    Now, when I try and export, it makes a small audio file and no video. The codec I'm encoding from is 'Animation'...should be easy..?
    Any ideas?
    thanks,
    Dan

    I'm having the same problem. Exporting as a 720 or a 480 from a 1080 only makes audio files. It used to work great under Snow Leopard.
    Even the Export for the Web/Broadband only ends up making audio-only .mov file
    I rolled back to my old copy of QuickTime 7 pro and was able to export a 720 and a 480, though you have to wade through a lot more codec options...
    K
    x

  • Trying to export "Audio only"

    I'm running FCE 3.51.
    I'm trying to export two audio tracks independently. I disable v1, get the pop-up warning about possibly losing render files. I choose to continue, then repeat for v2, then a1 & a2, a3 & a4. I highlight a5 & a6, then disable a7 & a8.
    From the Export sub-menu I choose "For Soundtrack". However, the "Audio Only" in the Include: pull-down is disabled. When I leave the default item "Audio & Video" I end up with a file equal in size to the entire film, but with black screen and no audio.
    My goal is an exported file with a5 & a6, then I'll repeat the procedure to generate a different file with a7 & a8, each with a .wav extension.
    What am I doing wrong?

    False alarm. I got it. Found the detailed instructions in the User's Manual. I should have been using Export for QuickTime Conversion rather than "For Soundtrack".

  • Can't export audio only

    Any ideas why “Audio Only” is greyed out when I try to export my project? I’ve tried both To QuickTime and to Soundtrack, no avail; could do it using QuickTime Conversion to AIFF, but why not these other ways? I just want to clean up the audio in STPro and bring it back...
    Thanks!
    dc

    No, I’m using FCExpressHD. I already tried pulling out the FCE.plist from my Main Library; didn’t help. But I notice there’s also a FCE.plist in my User Library, along with even more FCE stuff in a folder called Final Cut Express User Data, either Final Cut Express Files or Final Cut Express Configuration Files... Should I trash both plists or any of this other stuff?
    Aside: Decided not to upgrade to FCStudio, since I’d already bought and upgraded Motion and STPro before they were locked up inside Studio, and didn’t find FCP 5 compellingly better than FCP HD... Express seems to have what I need and is more usefully tied to iMovie which I have done a LOT of work in, but SoundtrackPro is an essential!
    Thanks for your help, Tom (and your cool books!)
    dc

  • Can QuickTime X Exporting Audio Only???

    Can QuickTime X export audio like QuickTimePro did (.aiff, .aac, etc.) ?
    QuickTime X has the same ability to record audio but seems to only alllow me to save it as a .mov or a .mp4 file. What gives!

    Use the QuickTime Player Pro app (Utilities folder) for those conversions (exports).

  • How do I export audio to movie without original music

    When I export audio to movie and I open the new quicktime file there is music I didn't write as well as my own music. In the manual, after I choose the desired format options for the bounced audio file, and I enter a name and target folder for the movie a dialog is supposed to appear allowing me to choose which of the original audio tracks should be included in the new movie. That dialog box doesn't appear on my computer.

    Try this.
    Bounce out your music from logic.
    Import Quicktime movie into the old i-movie (haven't tried the new one yet.) from here, you can extract the original audio.
    Import your new music into i-movie, and lay it against the picture.
    Export your new movie.

  • How can I capture Audio Only?

    Hello,
    I have FCEHD 3.0 and would like to capture audio tracks only with Capture Now (from a non-controllable device via Canopus). There is no "Audio Only" option in the capture window. Any ideas??
    Thanks,
    C.J

    Hi(Bonjour)!
    No way to capture audio only with capture command.
    Simply delete the video track in the timeline.
    Or:
    Plug your camcorder audio output in your in-line socket on your mac with an audio 1/8" wire, do a voice over record.
    The resulting audio file will be a "analog" one.
    You can also use a sound editing programm like Sound studio or audacity to capture your audio-in content, and import the resulting file in FCE.
    Michel Boissonneault

  • Final Cut HD- Exports Audio only?

    Well, I have had the best of luck with Final Cut Express HD-  I am not sure why, BUT NOW, everytime I export a video (quicktime or .mpeg4) it only exports the Audio and No video.
    I don't think I have have changed any settings, but if I have - how do I change them back?  This is killing my business as I make short web videos for auctioneers.
    What am I doing wrong- all of a sudden after two years all I can export is audio and no video?

    Maybe you have inadvertently selected NONE in the video export options?
    Al

  • New to Soundbooth....How can I export audio from a .flv file?

    Hi,
    I am sorta new to SB.  My girlfriend has purchased a study program that has numerous .flv files on a DVD.  She has asked if I can take the audio and convert each movie to an .mp3, (so that she can listen to the videos on her Iphone).  I figured I could open them in SB and then export as an .mp3, which would work fine on her Iphone.
    The problem I run into is that when I open the .flv files in SB, the video appears, but the audio doesnot.  The .flv videos play fine in every other program.  Am I doing something wrong?  I figure since she purchased the DVDs (and owns the study program), that I am not doing anything illegal by removing the audio.  Are they encrypted?
    Any other way to do this?
    Thanks,
    G

    Use the Share menu. Choose Export Using QuickTime.
    Choose Sound to AIFF.

  • How do I download audio only from a video from itunes

    I bought a video from itunes store, but my ipod is only the 4gb new generation. I don't have vidoe on it...all I want to do is download the audio portion onto my ipod. Can this be done and if so please help. Thanx

    The best thing you could try would be to use a third party program that can extract mp3s.
    This is a link to Jodix's Mp3 extractor (its a fifteen day free trial but it should get the job done).
    http://velocity.tucows.com/files4/jodix-video-mp3-extractor.exe

  • How do you Play audio only OAM file with the scroll in Muse ?

    Hi guys,
    I am building a pretty cool site that shows off a telescopic pole with scroll animation ..
    I am trying to add the audio of the pole telescoping with the scroll when the pole section scrolls on ..
    Check out the site at :  http://www.multi-pole.com
    Thank you
    Harrison

    Hello,
    Suppose you have a symbol instance named 'mysound_track' inside your  stage.
    After embedding the OAM in Muse, you can try the following snippet on scroll event
    var comp = document.getElementById('<OBJECT ID>').contentWindow.AdobeEdge.getComposition("<COMPOSITION ID>");
    var sym = comp.getStage().getSymbol("mysound_track");
    sym.stop(time); //Seek to the required time position
    sym.play();
    Notes:
    Replace ObjectID, CompostionID, time as required
    To make sure that Object tag is  loaded, you can initiate the communication from Object tag by using window.parent property

Maybe you are looking for