How do I export file from photoshop CC?
How do I export file from Photoshop CC
Good day!
Export what as which file format?
• jpg, png, gif can be created with File > Save for Web,
• jpg, png, gif, tif, psd, psb, eps, … with File > Save As (check »As a Copy« if needed),
• some video formats, Illustrator Paths, Data Sets with File > Export.
Regards,
Pfaffenbichler
Similar Messages
-
How I can export files from CS5.5 to send for further editing in CS6 and no lose quality?
how I can export files from CS5.5 to send for further editing in CS6 and no lose quality?
If all you need for further editing is the contents of your Timeline,
then you should follow Harm's sage advice.
Lagarith Lossless Video Codec
http://lags.leetcode.net/codec.html
Ut Video Codec Suite
http://www.videohelp.com/tools/Ut-Video-Codec-Suite
But, if you will need all of your source media files to continue the edit,
you should consider using the Project Manager.
Trim or copy your project
By using the Project Manager, you will be continuing the edit
with the original media files and there will be no quality loss.
Be aware that once you have edited the project in CS6,
it will be problematic (but not impossible) to return to edit in CS5.5. -
Exporting files from Photoshop Elements 12
I'm trying to export files from Elements 12 but the export option is greyed out. Why?
There is no export in the editor except the "export creations", because your files are not "in" the editor. You just save as. But PSE doesn't do any vector formats, so you aren't going to be able to save as EPS or .AI.
-
I'm trying to export the files that exist on an ipod classic. It belongs to my girlfriend, and she doesn't want to lose any of the music on it. But she wants to sync to a new PC and not lose the content. So, I want to export all the files and then place those files plus start a new itunes library with it. If I were to sync to my PC, would it erase all of the existing data? Can I buy/download a program that would allow me to upload all of the existing content on her ipod classic to my PC and then take that and place it back on by syncing it through her new laptop and adding the exported files....?
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
How do I export photos from Photoshop Elements 11 to my iphone?
How do I export photos? I'd even be happy if i could email them to my phone!
Thank you very much for your reply.
I had service work done on my computer, and in the process they deleted
Elements #11, so I cannot access that. BUT, I have over 3,000 photos on my
hard drive and I want to get them to my new Elements #12. How do I do
this?
David E. Pidcock
<Removed by Moderator> -
How can i export a 24bit avi file from photoshop for mac?
how can i export a 24bit avi file from photoshop for mac? i have a client that specificly needs the files to be avi and in 24bit what are the settings that i need to use to export the video using photoshop on a mac?
Hello,
To make a 24-bit AVI file in Photoshop, go to File>Export>Render Video. Then, under File Options, choose AVI from the Quicktime Export drop-down menu. Click the Settings button. Click the Settings button in the AVI Settings window. Change Compression to None, and then choose "Millions of Colors" from the Depth drop-down under Compression.
The Millions of Colors option is for 24-bit video (8-bit R+G+B channels, 8x3=24). Millions of Colors+ is for 32-bit video (24-bit video plus an 8-bit alpha channel).
-Brett -
Can't export an EPS file from Photoshop CS5 and open in Illustrator CS5.
I'm on Mac OS X Lion 10.7.5
I am making DVD covers for print. The barcodes for the DVD covers have to be done in Illustrator. But the original designs are done in photoshop including the text. For years this hasn't been a problem. Right before adding the barcodes I create an EPS file from photoshop, open that file in Illustrator and all my text is automatically coverted to perfect crisp clean vectors, viola! I add the barcodes and export the PDF for the printers.
But now I can't open my EPS files in Illustrator CS5 even though I'm exporting them the same way I always have from Photoshop CS5. Illustrator says... "The operation cannot complete because of an unknown error." --> Note it does not give an error number after this warning like I see it does for so many other people.
I have been trying to fix this for over 10 HOURS spanning 2 days! I'm infuriated I can't get help from Adobe on this and have read all the forums and don't see my problem listed anywhere.
I've tried:
- Deleting the .plist file and the Settings folder & resetting my permissions
- Uninstalling and Reinstalling Illustrator
- Turning off all other applications
- Creating more disk space on my hard drive (even though I have 200gb available)
- Restarting the computer
- Disabling my Font book and still I can't open the EPS file
I thought maybe it's possible it's the font I'm using Fontesque OT so I even tried converting text to objects prior to exporting the EPS file from photoshop to illustrator and turning off my font book, but still it won't open. And if I open the PSD directly in Illustrator, text comes out a bit fuzzy in the PDF I export.
If anyone can provide any solutions I would be so grateful! I'm at my wits end here, this should have taken under an hour to do and now it's ruining my entire weekend. I'm completely panicked because I was suppose to have these to my client over the weekend so they could turn them in for Print frist thing on Monday morning and of course Adobe provides no chat support or phone support after 7pm on weekday or on the weekend which is when this all started.I never even thought of reinstalling photoshop, but I think this was a font issue. I'd never saved an EPS with Fontesque OT Regular enabled, only Fontesque OT Bold. Somehow I think the font was causing the problem because ridding the font from the equation allowed me to open the EPS file.
After 12 HOURS of trying different things I found a WORK AROUND...
I had to:
- Select the Text in Photoshop (with Fontesque OT enabled) --> Select Create Work Path --> Covert to Shape on each of the text items
- Save EPS file out of Photoshop
- Disable Fontesque OT font in Font Book
- Then open EPS in Illustrator add in my Barcodes and export the PDF
(the barcodes have to be added in Illustrator because they need to be pure 100% black with no CMYK color in them. You can't save them out of Photoshop that way, only Illustrator, otherwise I would have made my pdf straight out of photoshop like any other normal human
This work around is the only way I could get the EPS files to open in Illustrator and still have the text remain super crisp like a vector.
NOTE to others in the future about crisp text from Photoshop to Illustrator:
- Simply "converting to shape" did not preserve the vector. You have to Select Create Work Path --> then Covert to Shape on each of the text items (with the font enabled) for this to work and preserve the crispness of the text. Even creating "smart object" did not truly preserve my vectors or the text crispness in the EPS file once I imported it into Illustrator.
DrStrik9 thank you SO MUCH for trying to help me. You did give me ideas that helped me figure out the workaround and also helped me feel not so alone as I struggled through this. I'm going to follow up with your other suggestions about reinstalling photoshop and also checking my RAM, etc. But I just want to that you so so so SOOOO much for all your time and consideration in this matter. I hope you have a wonderful amazing week ahead and that someone does something very nice and thoughtful for you too -
How do I export items from my iPhone to my iMac? Apple sent me a message to my iPhone, saying that there is an update for iOS, to 6.1.3, but before I install this update, I should first transfer some items from the iPhone to my iMac; otherwise I would lose these items (apps?)
I have two problems with this: 1) I don't know what files I should transfer, and 2) I don't how to transfer from an iPhone to an iMac (but do know how to download apps from iTunes Store to my iMac, and then to my iPhone.
Very confusing! Any help/suggestions gratefully accepted.
DBHMove the cursor to the very top of the computer's screen, click on File, and choose Transfer Purchases. If you need to authorize the computer, the command is in the Store menu.
(79537) -
Is it possible to export Vector Smart Objects as vector SVG files from Photoshop CC 2014?
I have Vector Smart Objects copied from Illustrator and pasted into Photoshop. I would like to export them as vector SVG files (using Generator or Extract Assets). I can add the .svg extension to the layer and actually export an SVG just fine. The problem is any SVG I have exported have all been raster images. It defeats the purpose of having that as an option as far as I'm concerned.
I remember watching and listening to keynotes and other speakers at Adobe MAX 2014 who said it was so powerful and amazing to create SVG files from Photoshop. If we're still exporting raster SVG files from Photoshop...that's not very impressive or exciting--especially since this era of modern web development benefits greatly from using vector SVG files.
I understand that Shape Layers can be exported as vector SVG files but that seems very limiting. I also realize that users can create some impressive vectors in Photoshop, but that is not optimal. Illustrator is a better tool for creating vectors and I normally use Photoshop and Illustrator side-by-side. I know that vector SVG files can be exported from Illustrator but that isn't as user friendly and convenient as utilizing Photoshop > Generator > Reflow.
My idea was to create my assets in Illustrator, paste them into Photoshop as Vector Smart Objects, set up my layout, and then use the Generator/Reflow method or Extract Assets to get a new web design started.
Maybe I misunderstood what the speakers at Adobe MAX had said. Perhaps it's just user error and I'm just missing something simple (it happens).
Photoshop CC 2014 notes the following under Help > System Info:
Adobe Photoshop Version: 2014.2.2 20141204.r.310 2014/12/04:23:59:59 CL 994532 x64
Operating System: Windows 8.1 64-bit
Any help or suggestions would be greatly appreciated! Thank you in advance for your time.Not quite the same, but have a look at the new Libraries feature that came with 2014.2.2 I just tried it, and dragging a vector object into a library I created in Photoshop, was there in Illustrator. This happens without having to close and reopen Illustrator. Just use the drop down at the top of the Libraries panel (in Illustrator) to find your custom, or job specific library.
-
I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone? Thanks!
iTunes will only import music from your phone that was purchased from the iTunes store. To transfer music from other sources you have to use 3rd party software, such as PhoneView.
-
in iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed.
Short answer: They are not resizing, there is no quality lost. The dpi is only set when you decide what size you're printing at
Longer answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD -
When I try to backup my files from photoshop elements 12 the "calculating total media size" box will only get as far as 46% and then freeze, how can I make it go to 100%
hi barbara
thank you for your response, i appreciate it. there's definitely nothing wrong with the mouse or trackpad, both work fine in every other application....i can also easily change size dimensions in other programs on my computer so it doesn't seem to be that either. it seems like there is something weird going on in the way that pse and my mac are interacting with each other, just wish i knew what it was. thank you again, wish me luck! -
Exporting links from Photoshop into a PDF (Rich Content PDF?)
Hi there,
I built my resume in Photoshop and typically I've been exporting to a PDF and then handling link creation within Adobe Acrobat itself. I'm wondering if there's a way to streamline this process such that links can be created within Photoshop and exported directly into the PDF file. This would save me the hassle of recreating links in Acrobat every time I modified the resume in Photoshop.
I've read about a Rich Content PDF extension/extra that is typically located in the Extras folder. I was able to successfully locate it and have Photoshop use it, but I don't know how to get links to actually be recognized by this plugin. My original hypothesis was to use slices (designating a region as a slice and then assigning it a link), but the Rich Content PDF export option did not recognize links through slices. Is there another way to do this or another way to create links in Photoshop such that it can be exported to a PDF (either through this plugin or otherwise)?
Thanks!And what program would you recommend?
In addition, the resume is already created in the program I'm comfortable with - I'm certainly not opposed to picking up a new tool and learning how to use it, but my question specifically was simply asking if there was a way to export links from Photoshop into a PDF as that would be the most time-efficient. -
Export photo from photoshop elements into iPhoto
how to export pic from photoshop elements into iPhoto
Are you using the Adobe Elements Organizer to manage the photos? You'll need to export/save a full sized copy to the Desktop, import the file from there to iPhoto and then delete the copy on the Desktop.
-
How to store multiple files from SAp in to Application server?
Hi Guys,
Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
Any Logic or Code for how to do is welcomed.
plz help me urgently.
Thanks,
GopiHi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
DIRNAME(200) TYPE c, " name of directory.
sp_name(100) TYPE c," name of entry. (may end with *)
END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
dirname(75) TYPE c, " name of directory.
aliass(75) TYPE c, " alias for directory.
svrname(75) TYPE c, " svr where directory is availabl
sp_name(75) TYPE c, " name of entry. (may end with *)
sp_cs(10) TYPE c, " ContainsString pattern for name
END OF isearchpoints.
data: l_file type filetable.
data: l_rc type i.
data: itab type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = in_file
"FILETYPE = 'BIN'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
TABLES
DATA_TAB = itab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
move g_tmp_file_path to in_file.
h_destin = ''.
SPLIT g_tmp_file_path at '\' into table itab.
loop at itab into g_tmp_file_path.
h_destin = g_tmp_file_path.
endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies TYPE TABLE OF dfies.
DATA: lwa_dfies TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
tabname = '/BI0/PCO_AREA'
lfieldname = 'CO_AREA'
IMPORTING
dfies_wa = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT = 'Destination directory'.
lwa_dfies-LENG = 100.
lwa_dfies-INTLEN = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'SP_NAME'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'destin'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = searchpoints
FIELD_TAB = lt_dfies
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
*& Form select_input_file_name
* text
form select_input_file_name.
* call function 'F4_FILENAME'
* exporting
* program_name = sy-repid
* dynpro_number = sy-dynnr
* field_name = 'PATH'
* importing
* file_name = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. "select_input_file_name
*& Form WRITE_DB_HOME
* Write DB home directory
* no parameters
FORM write_db_home.
CASE sy-dbsys(3).
WHEN 'ORA'.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ORAHOME', 30 searchpoints-dirname.
MOVE: 'DIR_ORAHOME' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
WHEN 'ADA'.
CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ADA_DBROOT', 30 searchpoints-dirname.
MOVE: 'DIR_ADA_DBROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
WHEN 'INF'.
CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
APPEND searchpoints..
*--- C5056155 End of ALV -------------------------------*
WHEN 'DB6'.
CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
ID 'VALUE' FIELD searchpoints-dirname.
IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_DB2_HOME', 30 searchpoints-dirname.
MOVE: 'DIR_DB2_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
ELSE.
EXIT.
ENDIF.
WHEN OTHERS.
EXIT.
ENDCASE.
ENDFORM. " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
WHERE svrname = sy-uname.
MOVE isearchpoints-dirname to searchpoints-dirname.
MOVE isearchpoints-aliass to searchpoints-sp_name.
APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
WHERE svrname = 'all'.
MOVE isearchpoints-dirname to searchpoints-dirname.
MOVE isearchpoints-aliass to searchpoints-sp_name.
APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN' TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
DATA: windir_path(64), programfiles_path(64).
* hoping that ProgramFiles is set in service user environment
CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
ID 'VALUE' FIELD programfiles_path.
IF programfiles_path IS INITIAL.
* %ProgramFiles% not available. guess from windir
CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
ID 'VALUE' FIELD windir_path.
* e.g. S:\WINDOWS ==> S:\Program Files
CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
ENDIF.
CONCATENATE programfiles_path '\SAP\hostctrl'
INTO searchpoints-dirname.
ELSE.
* on UNIX, the path is hard coded
searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
IF sy-opsys = 'Windows NT'.
searchpoints-dirname = '.\'.
ELSE.
searchpoints-dirname = './'.
ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB' TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
h_ind = sy-tabix.
IF searchpoints-sp_name IS INITIAL.
DELETE searchpoints INDEX h_ind.
ENDIF.
ENDLOOP.
ENDFORM.
Maybe you are looking for
-
Taking Resources Allocation memory reservations into account with CIQ 1.5
Hello all, I am trying to use CapacityIQ (1.5.2) to estimate how many more VMs can fit in our environment. Unfortunately Capacity IQ appears to be estimating a _much_ larger number of available VMs (CIQ says space for 49 more VMs; Resource Allocatio
-
How can I get a mobile app to call an SSL REST service?
I have a mobile application I created and have it installed on my Motorola Xoom. It calls out to a REST based services which is locked down via https. WHen I call in in the debugger I get the following: Error: [IOErrorEvent type="ioError" bubbles=f
-
Hi I have a strange problem with appending text to a JTextArea. Basically I have a JinternalFrame with a table. When the user clicks on a particular row, I want that some of the data in that row to be displayed in a dialog which has a JTextArea inclu
-
Quicktime Error Writing to File:
Quicktime won't update/download to current version (7.6) and this is the error code; I'm working on nearly seven hours trying to fix this problem now - anybody have any hints or experience with this? I've updated Java and all MS updates. C:\ProgramFi
-
I have a desktop computer- MAC. When I am looking for information or pulling up games for my grandkids, it will say I need to download the latest version of dobe Flash Player to view. I have downloaded this numerous times yet it still does not allow