How do I export separate really short wav. audio files?

Hey, I'm having a big problem with the exporting procedure using wav. audio files. For my editing project, a client asked me to export separate wav. audio file from a large audio sequence about a live auction, and he will use each 'bet' audio files for his website. For example, he wants each 'bet' that the auctioneer says to be put as separate wav file, so I cut each number individually with '1', '2', '3', '4', so on and so forth. However, when I'm trying to export each wav audio file for each number, all it came up with is general error message. Is it too short? If so, how do I export really short wav. audio clip? I'm really behind schedule and I don't think there's much of an alternative to send separate short audio files over to his e-mail. Let me know if I'm not making it clear.
Message was edited by: tommybone
Message was edited by: tommybone

I record voice tracks for slide shows that are online training packages that require WAV files.
Here's what I do. It's tedious but the workflow guarantees accuracy and repeatability.
Ingest.
Create master sequence of audio-only. Edit out bad takes. Using blade tool, slice track into separate sections for each slide. Make aditional edits in each slide's segment to take out bad takes, flubs.
Save early, save often.
Select all, adjust levels.
Select all, make independent clip. This step is crucial.
Back in browser, I create a new sequence and call it slide_01 and open the sequence. I go back to the Master, select one at a time the clips that are used for slide_01, use properties and rename them slide_01a, slide_01b, slide_01c. Copy them and paste them into the slide_01 sequence.
Repeat for every slide in the show, sometimes there are forty of the little basterds.
When I'm all done, I select all fo the slide sequences and use batch export.
Making the clips independent means they can be easily edited without referring to the original media. Using batch export means they allgo to the same location with the same settings.
bogiesan

Similar Messages

How do i export small clips from an audio file?

How do I export only a small portion of an audio track to file WITHOUT temporarily deleting any part of the audio file?
I have a big audio file. This audio file is a language lesson with many, many clips of english sentences and their target language translations. I basically want to cut up each little section that I don't already know how to translate, and use these audio clips as audio flash cards. There's 1 problem though, and that's my lack of Garage Band knowledge. I easily do this up to 80 times per audio lesson, so a simplified method would be preferred.... boy, I'm sure missing Logic right about now ;(

To export only a part of a track you have two ways:
The easiest way is the "Cycle Region": set the cycle region to the section of the clip that you want to export. The cycle region will show as a yellow bar at the top of the Timeline. You can drag the ends to adjust it. Silence all other tacks and use "Share > Export song to disk (or share to iTunes)". This will only export that section of he clip.
The other way would be to duplicate the tarck and work on the copy of the original: Either trim the ends of the region by draging or cut out the section you want (⌘T). Silence the original and export the copy.
Regards
Léonie

How can I export an Adobe illustrator CC .AI file to a DWG or DXF file suitable for SolidWorks?

Hi
Can anyone help?
How can I export an Adobe illustrator CC .AI file to a DWG or DXF file, without SolidWorks enlarging the file & converting every curve into hundreds of short little straight lines rather than a single continuous line/s.
I have made sure the file is ungrouped or has any compound paths or colours.
Opening it in Autocad 2010 still converts the DWG file into hundreds of short little straight lines!
The file is needed to laser cut out an aluminium shape using SolidWorks 2008 (Metal soft)?
Formats they can handle are:
DWG, DXF, IGES, IGA
There must be a way to export it without re-drawing the whole design in Soildworks again!!??
Can anyone help?
INCA

Not really. This is a limitation you will have to live with. Unless you are extremely careful, most paths will be converted to polyline segments by AI and in particular in AI CC this is somehow busted, so it happens more often. You might have much more luck opening a native AI file in DraftSight or a 2D CAD program like TurboCAD and exporting a DWG or 2D IGES/ STEP file from there. The sizing issue is a different matter, but without knowing what units you actualyl used, nobody can advise.
Mylenium

How do I export a song at an mp3 file? And how do i get it to play in stere

How do I export a song at an mp3 file? And how do i get it to play in stereo mode?

Go to the "Bounce Dialog Window".
See pg. 205 of the LE 7 Reference Manual.

How do i export a movie as an iso file in ilife11

How do I export a movie as an ISO file in iMovie11?

Why? What is your goal?
http://en.wikipedia.org/wiki/ISO_image
Toast can do it.

How can I export a playlist (.m3u) to local file system?

How can I export my playlits to the local file sytem, e.g. in .m3u format. In iTunes 11 it was a simple click on "export" and choosing a file name, done. The button "export" is missing in iTunes 12.

File > Library > Export Playlist...
tt2

Play or download a WAV audio file stored in a BLOB

Hi all, I was hoping someone could point me to the proper steps to take to download or play a WAV audio file I have stored in a BLOB column (from APEX). I'm sure it's probably pretty easy, but I can't quite find exactly the right approach.
Basically all I want to accomplish is show a report, standard or IR, that will show some kind of link if there is a non-null BLOB value for a column -- the column only stores WAV audio files. I'd like the link (image, button, whatever) to either play the audio file directly (using whatever desktop player, plugin whatever the user might have), or at least prompt to download the WAV file for playback later.
Any advice on how to easily do this?
Thanks very much
David

Se this link: http://download.oracle.com/docs/cd/E14373_01/appdev.32/e13363/up_dn_files.htm#CIHDDJGF
Thank you,
Tony Miller
LuvMuffin Software
(281) 871-0950

How do I put a song as an audio file (mp3, mp4 etc) onto iTunes for sale

How do I put a song as an audio file (mp3, mp4 etc) onto iTunes for sale

Check with CD Baby - they have an agreement with Apple to get indie music on iTunes for sale.

How do I change the length of an audio file?

How do I change the length of an audio file without changing the actual recording?
I want to aligne start and end points to the rest of my project.

Well, yes and no. I have tried the Bounce track in place function, but it did not do what I was after. However, today I got an idea that solved the problem. I copied the region I had punched in several times. Then I used the Bounce track in place function. This made a track that was just as long as all the other tracks. Finally I silenced the audio "clips" that I had used to make the region longer. I have now 24 tracks to transfer to the Alesis HD 24 that starts, and ends, at the exact same point. This will suit the Alesis software just fine, I think.
Thanks for the tips.

How to create QuickTime movie from JPEG and Audio file

My Sony Cybershot allows me to record audio files for each picture. When I'm reviewing the images, I can listen to the audio. However, these files are stored separately as a JPEG and a WAV file (having identical filenames, diff extensions.
Is there an easy way to merge these two files into a QT Movie?
Can this be automated?
Does anyone know of an app or script that can do this?
Many thanks,
Shayne

None specific for your task that I know of.
You'll first want to convert the silly .wav audio file (match the capture settings) to a more modern format which will also reduce its file size by a factor of ten.
http://www.apple.com/applescript/quicktime/
For some AppleScripts. Many no longer work with Tiger and QuickTime 7, however.
It may take some time but if you have hundreds to make it (Automator) can help speed up your workflow.
http://www.apple.com/downloads/macosx/automator/

How do you export separate audio tracks for Pro Tools?

I need to give separate audio tracks to my sound mixer but am confused on how to do so in FCP X.
So far I've:
Set the dialogue roles and stems for each character
Then I went into Master File>Settings
Selected:
"Format: Audio Only"
"Audio File Format: Wav File"
"Roles as: Audio only as separate files"
"Dialogue"
Sara
"Stereo"
And when I export and listen back to the wav file, there is either no audio or I hear select dialogue.
The only thing I can think of that I am doing wrong, is that each characters dialogue is not on the same track like the picture below. The tracks highlighted is of one character's dialogue that I am trying to export onto one linear track to export into Pro Tools.
Can tracks be assigned in FCP X? Or is there a crucial step that I am forgetting tthat explains why the audio for each character is not being exported.
Thanks!

If you're dumping audio for ProTools, you should be able to export XML for use in PT. Haven't done it myself, but the option's been there for a while now. You should be able to find instructions easily.
If you want to stick with making Roles work, I suggest making sure the roles are assigned properly to each clip. Kind of a super pain in the neck, to go one by one, but ... that's the way. There are key commands for the three default roles, but if you've created custom ones then it's more time consuming. Is that 'Sara' one a custom Role that you've created?
My only thought is you have compound audio clips there. Maybe go in and set the roles on the individual files inside the compound clips. Dunno...
The visual organization shouldn't matter (one track above another). That's the X way.
((In your picture, you say you have some files selected. When I select, I get a yellow border; yours are light green and dark green. What is that?))

How can we export table data to a CSV file??

Hi,
I have the following requirement. Initially business agreed upon, exporting the table data to Excel file. But now, they would like to export the table data to a CSV file, which is not being supported by af:exportCollectionActionListener component.
Because, when i opened the exported CSV file, i can see the exported data sorrounded with HTML tags. Hence the issue.
Does someone has any solution for this ... Like, how can we export the table data to csv format. And it should work similar to exporting the data to excel sheet.
For youre reference here is the code which i have used to export the table data..
><f:facet name="menus">
><af:menu text="Menu" id="m1">
><af:commandMenuItem text="Print" id="cmi1">
><af:exportCollectionActionListener exportedId="t1"
>title="CommunicationDistributionList"
>filename="CommunicationDistributionList"
>type="excelHTML"/> ---- I tried with removing value for this attribute. With no value, it did not worked at all.
></af:commandMenuItem>
></af:menu>
></f:facet>
Thanks & Regards,
Kiran Konjeti

Hi Alex,
I have already visited that POST and it works only in 10g. Not in 11g.
I got the solution for this. The solution is :
Use the following code in jsff
==================
<af:commandButton text="Export Data" id="ctb1">><af:fileDownloadActionListener contentType="text/csv; charset=utf-8"
>filename="test.csv"
>method="#{pageFlowScope.pageFlowScopeDemoAppMB.test}"/>
></af:commandButton>
OR
<af:commandButton text="Export Data" id="ctb1">><af:fileDownloadActionListener contentType="application/vnd.ms-excel; charset=utf-8"
>filename="test.csv"
>method="#{pageFlowScope.pageFlowScopeDemoAppMB.test}"/>
></af:commandButton>
And place this code in ManagedBean
======================
> public void test(FacesContext facesContext, OutputStream outputStream) throws IOException {
> DCBindingContainer dcBindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
>DCIteratorBinding itrBinding = (DCIteratorBinding)dcBindings.get("fetchDataIterator");
>tableRows = itrBinding.getAllRowsInRange();
preparaing column headers
>PrintWriter out = new PrintWriter(outputStream);
>out.print(" ID");
>out.print(",");
>out.print("Name");
>out.print(",");
>out.print("Designation");
>out.print(",");
>out.print("Salary");
>out.println();
preparing column data
> for(Row row : tableRows){
>DCDataRow dataRow = (DCDataRow)row;
> DataLoaderDTO dto = (DataLoaderDTO)dataRow.getDataProvider();
>out.print(dto.getId());
>out.print(",");
>out.print(dto.getName());
>out.print(",");
>out.print(dto.getDesgntn());
>out.print(",");
>out.print(dto.getSalary());
>out.println();
>}
>out.flush();
>out.close();
> }
And do the following settings(*OPTIONAL*) for your browser - Only in case, if the file is being blocked by IE
==================================================================
http://ais-ss.usc.edu/helpdoc/main/browser/bris004b.html
This resolves implementation of exporting table data to CSV file in 11g.
Thanks & Regards,
Kiran Konjeti

How can I export an edited image to a file?

I can't seem to find a way in iPhoto 09 do this. Can I export an edited image to a file, keeping the edits intact, or do I have to use a 3rd party editing app when I edit from inside iPhoto 09?
I would prefer to use iPhoto's editing tools so should I import previously cropped images into iPhoto? If yes, what file should I use? I was wondering if anyone does this on a regular basis and if there issues doing this.
I like the editing tools in iPhoto very much. In other apps I have always cropped, resized, corrected levels and a bit of color. I am not a power user by any means and I am close to doing this all in iPhoto if I could only export the edited image to a file.
The reason I want to do this is because the printing portion of my work flow is to upload files to my merchant who prints them and are ready for nearby pickup within an hour. This is all done at a very reasonable price and the color accuracy is very close.
Any advice would be greatly appreciated.
Regards,
Jim

You can edit from iPhoto by dragging to the desktop or exporting using the File -> Export command, setting the Kind to anything except original.
But you probably don’t need to:
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 Only*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and 10.5* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

How do i export my contacts into a csv file?

I need to export my contacts into a csv file - Apple support says it can't be done. Any suggestions anyone please?

or -> http://lmgtfy.com/?q=Mac+OS+export+contacts+to+CSV

How can I get a really large (30MB) InDesign file to a PDF under 10MB?

It's a 20-page document including dozens of photos and a few vector graphics which are .pdf or .ai, respectively. All are links, not embedded. I created the document for print, but now need a version to post on a website which has a max size of 10 MB.
I've tried a whole bunch of things including:
Selecting Export to Adobe PDF as "smallest file size"
Reducing the size in Photoshop of all of the linked photos. (FYI, they now range from 1MB to 4MB)
Saving the PDF as a reduced size PDF.
When exporting to PDF, compressing all images down to 72 ppi. (This got me to the smallest size I've been able to get: just over 18 MB)
Any help would be greatly appreciated.
Thanks.
-- Melissa

I'm not exactly sure waht content streams are, but there are some options for them in the Cleanup section when you run the optimizer. I'd uncheck the images and fonts boxes entirely (since you've already downsampled theimages externally and I don't think you want to unembed the fonts), then look through the otions inthe other sections.
Personally, the only thing I don't check inteh Discard Objects section is embedded page thumbanils, but all discarding them will do is remove them from the navigation pane so no major harm done, and under Dicard User Data I tend not to discard Document Information and Metadata (though I would do that to try to reduce size even more if necessary) and object data.

How do I export separate really short wav. audio files?

Similar Messages

Maybe you are looking for