How do I Extend my airport extreme using an airport express

How do i use and airport express to extend my network off an airport extreme

Apple's step by step instructions are here:
http://support.apple.com/kb/HT4259
Although two Extremes are pictured, the setup for an Express is exactly the same.
If you are running Lion 10.7.3, you will need to download and install AirPort Utility 5.6 for Mac OS X Lion for the instructions to make sense.
Otherwise, open Macintosh HD > Applications > Utilties > AirPort Utiltiy to start the process.

Similar Messages

HT4259 How to you extend my existing network using an AirPort Express?

My current configuration is a Linksys wireless router that I'm connecting to the AirPort Express via Cat. 5 cable. Only get a flashing yellow light. Help.

I got it working but here is the deal. It is not intuitive; you have to set it on "Create a wireless network", not "Extend a wireless network". You use extend a wireless network when you do it all wirelessly when the signal from the base is strong enough. But since I couldn't reach my wireless network to boost it, I had to use the cat. 5. So I guess it does make sense since I'm going from my WAN by cable to creating a wireless network. For some reason I thought it was going to be seamless with my existing wireless network so therefore I was extending my wireless network. Wrong. Thanks for all your suggestions as I think I would have quit long ago without you help.

How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!

See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?

How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?
I have an external hard drive attached to my Airport Extreme and I can access it just fine through Finder. I would like to be able to keyboard navigate to it in an efficient manner. I tried to use the "Go to the folder" feature but was unable to.
I had tried dragging the drive to the Network folder but the shortcut it created does not lead to the drive's contents...it seems to lead right back to the parent directory:
I hope I explained the question well. Thank you for all of your help and time in tending to my inquiry.

Cant you set up "back to my mac" then go to finder preferences and put a check mark under everything under the shared location. Also set up back to my mac on your airport extreme.

I bought an Apple Airport Extreme used and it did not come with any software disks. how would make it work without the software disk?

Bought an Apple Airport Extreme used and it did not come with any discs. Do i need any discs? or is there another way to setup this airport without using a software disc?

You can download the setup manual and software that you need.
Look on the bottom of the AirPort Extreme for the Model Number. It's A....... something.
Post back with the model number and the exact operating system you are running on your Mac or PC.

Using Airport Extreme with a Airport Time Capsule to update Blu-Ray player

I was wondering if it were possible to hook up a blu-ray player to a second Airport Extreme to update the player? I have a Time Capsule in my home office and a blu-ray on the other end of the house. The blu-ray needs updates. I am wondering if I can use an Airport Extreme as an "extension" wireless unit hooked up to my blu-ray player to have it connected to the net?
Thank you!
John

Welcome to the discussions, John!
You have a few options to do what you want.
Perhaps you were thinking of the AirPort Express when you mentioned AirPort Extreme. The AirPort Express can be configured to "extend" the main wireless network created by the Time Capsule and the ethernet port will be "live" so that you could connect to your BluRay player via ethernet.
An AirPort Extreme would work as well, but you may not need the other extra ethernet ports on the Extreme and extra expense for features that you may not use.
I take it that running an ethernet cable to the BluRay player is not feasible in your current situation.
You may not have thought about the next option, which would make use of a pair ethernet powerline adapters. One device plugs into an AC socket at the head end and another plugs into AC at the BluRay end. The adapters use the wiring in your home to transmit the ethernet signal. You would run a short ethernet cable from one of the LAN ports on your AirPort Extreme to the adapter and do the same at the BluRay end.
This type of connection will almost always provide a faster signal than wireless, so you may want to check these out as an option. Best Buy will have several to choose from.

HT1145 The airport extreme used with my iMac is not seeing my other devices...anybody, please?

The airport extreme used with my iMac is not seeing my iPhone 5, iPad (third generation) or my windows based PC. When I open the airport utility it shows only the internet and my iMac. It does not identify the others. Any thoughts? Thanks

Hi DaileyT,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
When do Apple wireless devices appear in AirPort Utility?
http://support.apple.com/kb/HT3624
Troubleshooting missing devices
If your Apple wireless device doesn't show up in the wireless device list, try the following:
Check to see that the device is turned on.
Check that the device is connected to the network via Ethernet or in wireless range of your computer.
Make sure the device has had adequate time to start up and become discoverable. In the case of Apple wireless devices that are not connected via Ethernet, AirPort Utility scans for new devices once every 15 seconds. From the time a device becomes discoverable (typically around one minute), it could take up to another 15 seconds before the device is displayed in the list.
If you have just configured a new Apple Wireless device, upgraded the firmware, selected "Restore Default Settings..." or have hard reset and configured an Apple wireless device and it does not show up in AirPort Utility after restarting, you may have an incorrect setting. You may want to hard reset the unit and set it up again.
If you are connected to a specific wireless network, all Apple wireless devices which make up that network will appear. However, if you "Restore Default Settings..." from AirPort Utility, or hard reset a device that is out of physical wireless range of the computer, you will need to move the device closer the computer to configure it again.
Best of luck,
Mario

Unable to connect Brother printer to Airport Extreme using USB

Hi, I recently bought a Brother HL-2270DW printer, which has 802.11 b/g wireless capabilities. My airport extreme (2008 model) is set to 802.11 n (5 ghz), so I can't set-up the printer wirelessly to the airport extreme without changing to 802.11 b/g. Instead I'm fine hooking up the printer to the airport extreme using a USB. When I first turn on the printer, I can print from my Macbook, but after a few minutes, the printer goes offline and has to be turned off/on. When I try to Open Printer Utility, there is a connection error. I have the right driver installed, and I can print fine for a few minutes after turning on the printer, and all the time when the printer is connected to the Macbook directly using the USB. I would like to use the printer by connecting it to the airport extreme using the USB or Ethernet. Any help would be much appreciated, thanks,

Please explain exactly what you're experiencing that leads you to claim that.
The current firmware of the TiVo Premier is easily confused about whether it's connected to the Internet or not. In my experience, a TiVo unit will quickly regain its senses and decide that it really is connected.

This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information.

I am trying to update my Airport Extreme. I go into the Airport Utility and this is the message attached I get when clicking on it.
"This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information." That;s it.
I guess I can hard reset it, but this seems weird. Any advice would be nice.
Thank you.

Dear Bob, I have same problem:
"This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information."
My MBAir is running OSX 10.9.3 and the AIrPort Extreme I'm trying to use is A1143.
Thanks

HT1998 My iPAD can use the internet through my airport extreme, but the airport utility does not see it so I can't create a guest password. What am I doing wrong?

My iPAD can use the internet through my Airport Extreme, but the Airport Utility does not see the device so I can't set a guest password.

If your Mac is using the Lion operating system with recent updates, it will be necessary to download and install AirPort Utility 5.6 for Mac OS X Lion
Open Macintosh HD > Applications > Utilities > AirPort Utility 5.6
Select the AirPort Extreme and click Manual Setup
Click the Wireless tab just below the row of icons
Click the Wireless Network Options button
Remove the check mark next to Create a closed network
Click Done, then click Update to save the new settings and allow 25-30 seconds for the AirPort Extreme to restart

I am installing airport extreme using my pc what is the latest version of software i should use

I am installing airport extreme using my pc what is the latest version of software for airport extreme should I use?

AirPort Utility 5.6 for Windows.
http://support.apple.com/kb/DL1547

Which airport is good to extend my wifi, what is the difference between the AirPort Extreme and the airport express base sstation

What is the difference between the AirPort Extreme and the airport express base station and which one can extend my wifi router.

With rare exceptions of a few older routers, neither one can extend a non-Apple router's network wirelessly - they are not designed that way - but you can extend the wireless network if the Extreme is hardwired to the router or you can connect wirelessly and join the network as an access point that will provide remote ethernet access but not produce or extend the wireless signal - here is a comparison of the Apple base stations - http://www.apple.com/wifi/

Creating a bridge with airport extreme (base) and airport express

i am having trouble creating a bridge with airport extreme (base) and airport express. i got the airport express to connect to my network. Airtunes sees it fine. i have an iMac (running Tiger) connected to the airport express via ethernet which i was hoping to get internet on (the iMac doesn't not have built in wireless and i had a spare airport express). now the airport express is no longer visible to the airport setup assistant on that iMac. but, like i mentioned, Airtunes is working fine, and the light is green.
i'm new to the wireless stuff. i am sure i just missed a step. how do i get the iMac to connect to the internet via my airport express bridging to my airport extreme wireless network?
your help is appreciated.

You can do this with the equipment you have. Configure the AirPort Extreme base station (AEBS) to act as a WDS main base station and configure the AirPort Express (AX) to act as a WDS remote base station. That will allow you to use the Ethernet port on the AX.
Unfortunately WDS also causes the available wireless bandwidth to be cut in half.

Setting up Time Capsule, Airport Extreme, and old AP Express...

Question regarding setting up a wireless network in the home.
I currently have the following Apple wireless networking products:
Time Capsule - Model A1254
Airport Extreme - Latest model
Airport Express - Model A1084 (older model unit)
I also have a Verizon router with wireless capabilities.
I am trying to provide wireless coverage throughout my entire home. The Verizon router is in the basement, and I have the wireless portion turned off.
I have ethernet running to my office on the first floor from the Verizon router in the basement as well as ethernet running to the second floor. In my office I put the Time Capsule, while the Airport Extreme is on the second floor.
Since both the Time Capsule and the Airport Extreme have ethernet providing their internet connection, I am curious to know what is the best way to set them up to provide wireless support to laptops.
Should they both be configured with the same SSID but with different channels? Should they be configured with different SSIDs? What settings will provide the most seamless (Apple-like) experience? What will provide the best bandwidth?
Lastly, should I set up the Airport Express with WDS? Should I ditch it altogether since it bottlenecks the performance of the WDS main router?
Any advice would be appreciated!
Thanks,
Ivan

+Should they both be configured with the same SSID but with different channels?+
Yes, if you want one "large" network. A laptop could "roam" around the house and automatically pick up the strongest signal.
No, if you want two separate wireless networks. In this case, you would need to switch networks depending on the location of your laptop in relation to the nearest router.
Make sure both the Time Capsule and AirPort Extreme are configured with their Connection Sharing setting to "Off (Bridge Mode)".
The ethernet backbone on your network will provide for the best possible bandwidth...much better than if you try to extend using wireless only.
+should I set up the Airport Express with WDS?+
Ideally, you would set the AirPort Express up the same as the Time Capsule and AirPort Extreme...using ethernet to the AirPort Express. WDS will kill your bandwidth on the wireless network, cutting it in half. If you can't connect the AirPort Express using ethernet, you will probably be much better off simply not using it.

Airport Extreme / TimeCapsule and Airprot Express base stations

So if I use an Airport Extreme (using 802.11n) for my main internet access, can my Airport Expresses join that network to maintain access to stereos and printers around the house.
I guess Im asking can the 802.11g devices join an 802.11n network....? Any help would be good news.
Crispian

The side effects of having to use the b/g compatibility mode will be a slight decrease in the speed that your wireless network would get in n-only mode. Of course, none of this is important unless all of your computers are capable of "n" connections so that you could even contemplate running an n-only network.
If you are currently able to max out out internet connection speed (that your ISP claims you should be getting) with a direct ethernet cabled connection between a computer and your DSL modem, then there is no need to change your DSL modem.

How do I Extend my airport extreme using an airport express

Similar Messages

Maybe you are looking for