How do I extract AppleWorks from my 'dead' iBook G4 to my Intel MacBook?...

I quite liked AppleWorks, it was good enough for me, little did I realise Macbooks don't come with a proper non-trial word processing facility - so I suppose Apple expect me to buy it, or the predecessor again.
iBook G4   Mac OS X (10.4.4)  

Well yes, I have the Panther Install and Restore discs that came with my defunct iBook G4, and also Tiger discs I bought to upgrade the OS after fitting a new hard drive, the Intel Macbook will not accept the Panther discs, and I couldn't find Appleworks on them anyway - maybe the machine came with it and Sound Studio (the two things I use most!) 'bundled', it's an expensive luxury keeping a mac I tell you.

Similar Messages

  • How to deactivate a license from a dead hard drive

    how to deactivate a license from a dead hard drive

    You can't. However, Support or chat may be able to help you reset the activations.

  • How do I recover data from my dead hard drive?

    How do I recover data from my dead hard drive?

    Is it dead or corrupt? There are recovery programs out there, however if your HD is head, paying pros to do data recovery is VERY costly.       Some have removed the platters and installed them in likewise drives that dont have head crashes, but torque tolerances are tight, and doing it right is a bit advanced and tricky for most. Ive done HD disk swaps 4 times and had success 3 of the 4 times. It requires cannibalizing another working HD.   In the future remember the golden rule, 2 copies is 1, and one is NONE.
    Its likely you could find a local computer repair station that can do it for you cheaply.  HD dont really "die", they have fried SATA bus, or crashed HEADS........the platters DO demagnatize over long time due to heat and degauss of the data (poor storage, etc).........but in specific, a HARD DRIVE DOESNT DIE ,.........only the flying head mechanisms that read and write the data, and SATA / bus that feeds the data DIES,.......but the data (unless corrupt or magnetically corrupted) is THERE

  • How do I extract email from a form and send the PDF to that user?

    How do I extract email from a form and send the PDF to that user?

    here you can add email to send to, CC, Subject, and body message
    var oDoc = event.target;
                        oDoc.mailDoc({
                                                                bUI: false,
                                                                cTo: "Agency Contact Email",
                                                                cCC: "",
                                                                cSubject: "Write your title here,
                                                                cMsg: "Dear" + AgencyContact + "(" + AgencyContactEmail + ")\nThe student, " + FirstName + " " + LastName + " has applied to work at your agency. Please confirm they can work here blah blah blah.......\n\nThanks.\n\nrespectuflly,\n\nme"

  • How do i extract pages from within a pdf document?

    how do i extract pages from within a pdf document?

    Hi adobespurs,
    To extract pages from a PDF, you need to use Acrobat. If you don't have Acrobat, you can try it for free for 30 days. Please see www.adobe.com/products/acrobat.html for more information.
    Best,
    Sara

  • How do I extract pages from a Secured PDF file

    How do I extract pages from a Secured PDF file?

    Adobe would call that hacking, and don't allow discussion of it in this forum. You should contact the copyright holder and see if they are prepared to release the password, or an unsecured document, to you. If it's something made for you like a bank statement you should tell the bank how inconvenient their choices are.

  • Just had Adobe Reader 11 installed on my Mac desktop.  How do I extract pages from a PDF?

    Just had Adobe Reader 11 installed on my Mac desktop.  How do I extract pages from a PDF?

    You can extract pages with Adobe Acrobat, not Adobe Reader.

  • How do I extract pages from a pdf using 'Adobe PDF Pack'?

    How do I extract pages from a pdf using 'Adobe PDF Pack'?

    I think you have to buy extractor for 1.99 a month to extract PDF.  But I am having trouble activating it.  Good luck.

  • How do i extract year from a variable???

    Hi all,
    I want to extract year from a parameter.
    I tried the following, i'm getting errors.
    When I executed the below code,
    SELECT TO_CHAR(:X_PRM_YR_END_DT,'YYYY') FROM dual;
    I got the following error.
    ORA-01722:invalid number
    When I executed the below code,
    SELECT TO_DATE(:X_PRM_YR_END_DT,'YYYY') FROM dual;
    SELECT to_char(TO_DATE(:X_PRM_YR_END_DT,'YYYY')) FROM dual;
    I got the following error.
    ORA-01830: date format end before converting entire input string
    When I executed the below code,
      SELECT extract(YEAR FROM :X_PRM_YR_END_DT) FROM dual;
      SELECT extract(YEAR FROM 1/11/2013) FROM dual;
    I got the following error.
    ORA-30076: invalid extract field for extract source
    How do i extract year from a variable???
    Help me plz
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production.

    Try This,
    select TO_CHAR(to_date('01/01/1980','dd/mm/yyyy'),'YYYY') FROM dual;

  • How do I extract audio from a movie?

    How do I extract audio from a movie I downloaded from iTunes and save it to my iTunes library to use as a ringtone?

    Do you have Qt Pro...?
    If not, you may be able to extract the audio with this free program:
    http://www.squared5.com/

  • How do I extract text from an email?

    Hello!
    I am in the process of trying to automate orders from my website. How do I extract text from an email and paste it into specific cells in an Excel spreadsheet using Automator?
    Many thanks,
    Toby Bateson

    If you select the message on the Inbox list, or open the message, you can then go to the Message menu of Mail and select Remove Attachments.
    Bob N.
    Mac Mini 1.5 GHz; iBook 900 mHz; iPod 20 GB   Mac OS X (10.4.7)  

  • How the data extraction happens from HR datasources from R/3 to BW system.

    Hello All
    How the data extraction happens from HR datasources from R/3 to BW system.Incase of delta records ( for CATS datasources ) ,Is there any flow like LO .
    Incase of Full and delta loads how does the data will be taken from R/3 to BW,DO we need to fill setup tables ?
    Searched forum but couldnt able to find the relevant one.
    Thankyou
    Shankar

    Hi Shankar.
    HR Datasources do not have setup tables . Though before implementation, certain customizations should be done and the delta loads have dependency on other data sources. Also you must have implemented Support Package SAPKH46C32, or have made the relevant corrections in SAP Note 509592.
    Follow this link for details on customization and dependencies for all CATS datasources.
    http://help.sap.com/saphelp_nw70/helpdata/en/86/1f5f3c0fdea575e10000000a114084/frameset.htm
    Regards,
    Swati

  • How do you extract pages from .indd to create a new .indd?

    How do you extract pages from .indd to create a new .indd?

    Laubender schrieb:
    @moseymums – two answers here:
    1. Duplicate the document and remove all not wanted pages.
    2.a Duplicate all selected pages in the Pages Panel to a different open InDesign file (the target) with the "Move Pages…" command.
    2.b Remove all unwanted pages from the target InDesign file.
    Uwe
    But take care on text threads accross several pages. If you delete a page with a text frame linked to a thread accross several pages, the text will change to the beginning of the thread on every first page.
    So it might be good to run a script which will unlink threadened text frames before.
    If you have often to do this task, there are several plugins which will help you to perform this. E.g. Output factory from http://zevrix.com/

  • How can I extract images from Numbers?

    Sounds a bit stupid but how do you extract images from Apples 'Numbers 3' on a Mac?  I have a client that sends images in XLS files, that normally in Word I would Alt Click and 'save as...'
    I was trying to stop using Word but this simple little feature will make all the difference.
    Can anyone point me in the right direction.
    Thanks,
    Dave

    Hi Wayne,
    Thank you for your response.  Sadly if you do this it copies in to the MACs clipboard as a snap shot of the image at the dimensions in Numbers.
    Eg. 
    An image I've extracted from the document via Excel saved out at it's original dimensions 1024 x 300px, even though it was placed, then scaled down to 300px wide on the sheet.
    Same image copied then pasted in to an image editor (as I couldn't paste into finder) was only 300px wide.
    The feature I need is to be able to save out the original image placed in the Numbers sheet.
    Anyone with ideas on this?

  • How can i extract data from oracle table  to flat file or excel spread shee

    Hello,
    DB Version is 10.1.0.3.0
    How can i extract data from oracle table to flat file or excel spread sheet by using sub programs?
    Regards,
    D

    Here what I did
    SET NEWPAGE 0
    SET SPACE 0
    SET LINESIZE 80
    SET PAGESIZE 0
    SET ECHO OFF
    SET FEEDBACK OFF
    SET VERIFY OFF
    SET HEADING OFF
    SET MARKUP HTML OFF SPOOL OFF
    Sql> SPOOL bing
    select * from -------;
    SPOOL OFF;
    I do not see file.
    I also tried
    Sql> SPOOL /tmp/bing
    select * from -------;
    SPOOL OFF;
    But still not seeing the fie,

Maybe you are looking for

  • How to handel cancel button in Sap Script ?

    Hi friends, I want to print SAP Script, in print popup screen have u201C print previewu201D  u201CPrintu201D  u201CCancelu201D  button. Whenever  press  Cancel button getting popup message u201COutput was cancelled by the useru201D , if press u201CEx

  • Sharpening Raw files: what am I doing wrong?

    My problem is getting my shots (Nikon D80 & Nikon Lenses + Tripod) through the Alamy quality control barrier!  I have had three rejections so far.  I am following the workflow suggested in Martin Evening's book on CS4 which suggests that CS4 camera R

  • Mapping for ND_FORM to ND_FORM not possible due to recursion

    Hi Experts, I am trying to define external context mapping...with the steps..say there are two components ZOMP1(in which i am using other component) and ZCOMP2(this is used in zcomp1) 1. IN the component zcomp2  I define ZCOMP1 under the used compone

  • Price for packing material

    hi all, I do delivery & packing in VL01N. But when I create the invoice in VF01 the system gives error "mandatorycondition XYZ missing." The mandatory conditions are the basic price and the txes conditions. The item category for packing is not releva

  • Linking Frames Problem

    Here's the deal, I have a left frame, right frame, and mainframe. In the left frame I have a list of main categories that I am linking to subcategories in the right frame. To do this, I created new HTML pages and typed the lists on those. So when I c