How do I extract audio from a movie?

How do I extract audio from a movie I downloaded from iTunes and save it to my iTunes library to use as a ringtone?

Do you have Qt Pro...?
If not, you may be able to extract the audio with this free program:
http://www.squared5.com/

Similar Messages

  • HT4016 How to extract audio from a movie that is already in my project without having to delete and re-import the movie?

    The article is
    "How to extract audio from a movie file"
    But it only tells you how to extract when you first drag the movie file into the project.  This much is obvious when a dialog presents you with a checkbox asking if you want to "Extract the audio track" ... Duh
    Here was my workflow:
    Dragged the movie file into my project
    I checked "Extract the audio track"
    I shifted the "Movie Start Time"
    Extracted audio track did not shift with the movie
    I deleted the extracted audio and played the audio directly from the movie
    Now, I need the audio extracted again at the current movie position
    I knew where this option was in the Logic 9 menus, but I'm having trouble finding it in Logic X
    Is this option still available, or has it been removed?

    Solved:
    I found the menu option for extracting or re-extracting the movie audio.  BTW, the original article:
    Logic Pro 9.1: How to extract audio from a movie file in 64-bit mode
    should really also state the menu command for extracting the audio, not just the procedure when first adding the movie to the project.
    Here's the menu command:
    File>Movie>Import Audio from Movie
    Cheers

  • How do I extract audio from a .cpvc file?

    I have a .cpvc file that I would like to extract audio from.
    How do I do this? It doesn't seem clear in what I have Googled so far.

    Hi there
    Try clicking the Library button. Locate the audio, right-click and choose Export.
    Cheers... Rick

  • How do I extract audio from a QT movie?

    Hi all,
    I have a QT movie that I would like to extract the audio out of. Any ideas on the best way to accomplish this?
    Thanks,
    Ed

    Do you have Qt Pro...?
    If not, you may be able to extract the audio with this free program:
    http://www.squared5.com/

  • How do I delete audio from a movie? JD

    I want to remove the audio tracks completely from a video I am working on - how do I do that?

    Select the audio track so that a yellow border is around it. Then you can right-click and select DELETE SELECTION.

  • How do I extract audio from a clip?

    I've tried to select a clip in the timeline then go to clip/audio optins but audio extract is always grey...  I'm trying to pan audio into the next clip.

    No need to extract it to apply fx or mix / pan it.
    I f you want audio only from a clip ...you can drag clip to Source Monitor and then Drag Audio Only from there to Timeline / sequence

  • Extract audio from MP4 movie file to iTunes library

    I downloaded a 5-minute movie, it's now sitting on my desktop as a mp4 QuickTime file, opens and plays fine. I want to turn the audio soundtrack of the movie (one complete song) into an mp3 in my Music library, so I can just play the song on my iPod without opening the movie file (I have an older iPod 60GB that doesn't play movies). Please advise, thanks

    Open the movie in the QuickTime Player and Select Export -> Sound to AIFF.
    Drop the exported AIFF file into iTunes.
    Make sure the iTunes CD Import Settings in Prefs is set to the MP3 encoder.
    Right-Click on the AIFF file in the iTunes Library display and select Create MP3 Version.

  • How do I record audio from movies on an iMac?

    Hi, I would like to record pieces of audio from dvd movies in mp3 format on my mac, how can i do it?
    I've tried with quicktime but the quality is bad, probably because quicktime also records enviromental sounds and noises. Any suggestions?

    ciao,
    use this simply tutorial
    http://www.simplehelp.net/2006/09/09/how-to-extract-and-convert-the-audio-from-a -dvd-using-os-x/

  • Extract audio from a DVD how to

    Is there a FREE and ease way to extract audio from a DVD?
    Thank you

    Set a tape recorder next to your speaker? Seriously, though - what kind of DVD? If it's a commercial DVD, it's copyright protected and people here shouldn't give you advice on how to do it. There are other places besides Apple's discussion forums to get that kind of info, and I don't see why this question belongs in "Using Mac OSX Leopard" in the first place.

  • Extracting audio from premier project is not automatically opening in audition .How to reset this

    I was  using the feature of extracting audio from a time line in Premier for working on noise reduction and so on .It used to open automatically on choosing
    " EDIT CLIP IN AUDITION"  and on "saving" it was ready in Premier for further action. Now this is not happening. What happened and how do I reset this feature please?

    Not a reply but some more input. The culprit is not Safari but iChat, which I discovered just now, having run the app and quit after the person I was inviting wasn't available. I'm grateful for anyone who shed some light on this for me.
    All the best,
    David

  • How can i leave audio from one clip playing, while showing another one in i

    i am editing a movie, using iMovie 08, and want to use sound for a clip in the video for the end credits. how can i do this?
    just to be clear, i am not trying to add audio. i am trying to leave the audio from ONE CLIP playing, while viewing a new frame. thanks.

    This is simple in iMovie 11 (drag and drop), but in iMovie 08, you can still do it.
    [See this blog post for details|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.htm l]

  • Ripping audio from a .mov

    hey anyone know how to rip the audio from a quicktime move file (.mov)?? cheers.

    QuickTime Pro allows you to "Extract" (Movie Properties window) a track from any saved file.
    You will not be able to extract an audio track from any "Muxed" formats (MPEG 1 or 2 or .swf formats).
    This requires either a "real time" recording (Snapz Pro or Wiretap) and other software.
    You can also use iTunes software (Mac or PC) to "convert" any saved file to a compression scheme of your liking. It will still be the "lower end" of the audio spectrum because of the compression applied to the source file.
    No way to get AAC to convert better than the source formats used.

  • How do I unlock audio from video in iMovie '11?

    I've transferred some old videos to iMovie '11 using an ADVC-55 and there are some places where the audio has slipped out of sync with the images.
    I have extracted the audio from these clips, so I can move it along the timeline to get it back into sync with the pictures - however, I cannot find how to unlock the extracted audio from the video, so I can move it along the timeline.
    I've tried everything I can think of and iMovie's Help function doesn't reveal the answer.
    This would have been easy in earlier versions of iMovie, but it's got me stumped in this version. Can anybody help, please?

    AppleMan1958 wrote:
    Just drag the audio left or right.
    Select a portion, then right-click/Split Clip, or EDIT/SPLIT CLIP. Then detach audio and drag it left or right.
    This was exactly my problem - that didn't work!
    I've realised now, though, that it was because I'd cut the clips so precisely that the audio couldn't be dragged either way - there was nowhere for it to be dragged to. I added some black space at the beginning and ends of the images and all now works OK

  • How do you extract pages from .indd to create a new .indd?

    How do you extract pages from .indd to create a new .indd?

    Laubender schrieb:
    @moseymums – two answers here:
    1. Duplicate the document and remove all not wanted pages.
    2.a Duplicate all selected pages in the Pages Panel to a different open InDesign file (the target) with the "Move Pages…" command.
    2.b Remove all unwanted pages from the target InDesign file.
    Uwe
    But take care on text threads accross several pages. If you delete a page with a text frame linked to a thread accross several pages, the text will change to the beginning of the thread on every first page.
    So it might be good to run a script which will unlink threadened text frames before.
    If you have often to do this task, there are several plugins which will help you to perform this. E.g. Output factory from http://zevrix.com/

  • Extracting audio from short clips

    My previous post/question seems to have disappeared so I apologise for a repeat: I'm noticing (and this started happening just recently) that it takes now about 10 minutes to extract audio from even very short clips (10 seconds long, say). It used to be clip-length-dependent, now it's flat 10 minutes no matter how short the clip. It's driving me nuts because it's an enormous slowdown of the workflow.
    Anybody has seen this and knows about a workaround?

    it takes now about 10 minutes to extract audio from even very short clips (10 seconds long, say)
    Is the underlying media clip also 10 seconds? Or is it much larger and just edited down to 10 seconds?
    iMovie HD extracts audio from the WHOLE underlying media clip but displays just the part that is not edited off. So extraxting audio can take time when deailing with such clips.
    Do a test: Export the just the selected 10 second clip as Full Quality DV and import it back (so the media clip really is just 10 seconds). Then extract audio from that 10 second clip. Is it any faster?

Maybe you are looking for

  • Logon Error when SetTableLocation with RAS SDK

    Hi I have a lot of Reports based on TTX files. As these don't work anymore in an 64 bit environment with CRVS2010 I tried to make an update program based on an replace_click sample in this newsgroup. My program is 32 Bit (x86) on an Windows 7 with VS

  • Real-time HDV importing ..& Happy New Year!

    Hi! Happy 2006! Some time in December (?) I said I'd been to the London Apple Store to try importing HDV - with a Sony FX-1 camcorder - into iMovie HD on a PowerMac, to see if it'd import in "real time" ..instead of importing at half or quarter speed

  • Automated Log Off - Windows 7/8

    What is your goal here? There are a couple of different ways to go about this. One way is, If you set up a policy for the windows 7 boxes to force log off after the user's hours expire (not using the right words here yet) and then update their AD set

  • More than one ipod

    I have an ipod video and nano and is there anyway to use both with the same itunes program on my laptop? my goal is for them to have access to the same music with out having to go in between two programs or importing music/cd's twice.

  • Using a Macbook Pro on top of an ESD Mat?

    Hello, I have a Macbook Pro and I wanted to use this while at work. At work, I have an ESD mat on my desk and I use an ESD wrist strap. Will either the ESD mat or the Macbook Pro get damaged if I use the laptop on top of the ESD Mat?