How do i fade an instrument in?

Im not sure if this is possible on garageband for ipad, but can you fade in instruments/tracks? The only thing related to fading is to make a general fade out automatically at the end of the song. Otherwise, it seems as though you can only set tracks to one volume level for the whole song.

Not possible at the moment. Drop a line to GarageBand for iPad iOS Feedback if you'd like to make a feature suggestion.
tt2

Similar Messages

How can I fade in/out audio only below a certain frequency?

I have an MP3 made from a MIDI file in which all instruments are unfortunately in a single track. I want to fade the tom part in because I thought it would be easy considering its obvious separation from the marimba part in the Spectral Pitch Display. How can I fade in these lower sounds only without affecting the higher marimba sound?

You need to go back to the MIDI file and adjust the level there - you can't do this after the event unless you use something like the incredibly expensive Melodyne. This can achieve harmonically related event isolation, which Audition doesn't do. Toms don't just exist at one frequency; they have a harmonic spectrum and if you don't capture all of the harmonics, you won't be able to alter the relative level of all of them - which is what you'd need to do. Otherwise it will sound completely wrong.

How do I get Vienna Instruments (VI's) into a Logic Project?

so, I'm running an IMax OS X 10.6.7, with Logic Pro 9.1.4
I recently downloaded Vienna Symphonic Library Special Edition and Special Edition plus, the latest version. Everything is now downloaded and ready to go, and I have started messing around with patches, saving matrices, etc. on the standalone Vienna Software.
So my question is, how do I import the VI's into a Logic Project? I have read the Logic Manual, and it doesn't provide detailed instructions on how to do this. When I look at the Allowable VI plug ins in Logic, it shows the vienna instruments there, but I just don't know how exactly to go from having the matrices saved in my custom folder, using them with the standalone vienna player to actually using them within a Logic Project to create midi regions/tracks, and turn old midid regions/tracks that were created with Logic instruments in to tracks/regions with the Vienna Virtual Instruments.
Help?

Yes, I know how to run a software instrument. I actually figured out how to do this on my own, and am assuming that it is the best way. I just loaded any software "Logic" instrument, and then loaded the Vienna matrix into a plug in slot.
So that seems to work, but now I have more questions. Do you use Vienna?
If I already have a violin region recorded on a Logic instrument track, I have realized that i can just copy and past it onto the new track with the Vienna plug in and it will adopt those settings, but my question is this:
Vienna seems to make a big deal out of being able to play all the articulations of one instrument on just one track, with keyswitch controls, etc. But if I'm working with Midi data on a track in logic and I'm not performing all the parts "live" while recording, how do I get the articulation changes to stay in place, so that I can have a violin play staccato, legato, and pizzicato all in one track, without having to manually hit the keyswitches to change the articulations while the track is playing? obviously I can't do this while bouncing, or with multiple tracks at once, so how to you create a single track with multiple articulations in Vienna, plug it into a Logic Track, and have it playback with the changes in articulations, without having to manually change it.
Any ideas?
I have a lot of multi track orchestral projects composed using logic instruments, but I want to get all those over to Vienna Instruments as well. What would be the easiest way to do this, with consideration to my above question concerning one track for multiple articulations of an instrument?

How do I fade out audio in Premiere Elements 13?

HOW DO I FADE OUT AUDIO IN PREMIERE ELEMENTS 13?

ATR
Thanks for answering,
im moving slowely forward in speeding up making presentations by using the new discovered smart tricks or functions.
So you understand my level of expertise:
This step by step production methode im using now give's me controle without the (full) knowledge of all the (smart)functions in this program.and slowely learning the way arround.
starting a project: a mix of photo's and avi's, starting with manual time line filling with the selected files then the timesaving "Standard crosover on all selected".
second: placing a header with the titel at the front and a ending a the end. (cut al the wrong or bad pieces and extend some photo viewingtime if needed.)
And then adding subtitels/tekst and use some other crosovers to highlight the change of subject or stills to movie.
And at last: placing the background music on "soundtrack": after some fiddeling around ive choose to cut the musictrack between the avi's instead of let the music play all the time and adjust the volume down to zero when a avi is playing.
this have two advantages:
1) the songs can be streched by by cut and jumping to the end of the avi soundtrack. (no loss of music through fading out and still let it play so need less musicsongs.)
2) And the rightclick fade function with the standaard fadingtime => "fade out" and "fade in" is easly to use because of the end track avi and begin track music timeline. (And if needed lowering the fading slope/ extend the fading time by moving the "points" on the audio line)
But; its a lot of work and after the first run through the presentation(or watching on TV) and there is a adjustment needed (fadingtime, volume-changes) you have to adjust every bit of the soundtrack. (keeping the volume "feeling" the same is the difficult part.)
I will read about the Smart Mix function and test it on a other project. see of its fits my kind of using and expertise. (every automatic (smart) function needs understanding of its purpes and limitations and there are a lot of them in premiere
What is in your opinion the most effective way of adjusting volume of audio parts across the hole project so its merged in to one audio/soundlevel?
(and offcourse in the hole way of building the presentation.)

In Logic Pro 9, how many midi controlled software instruments do you get...?

In Logic Pro 9, how many midi controlled software instruments do you get and is there possibility to download more as it says 40 on the programs info on the Mac Store, as i intend to compose on it but with only 40 instruments it's not really worth it.
So i was just wondering whether it let you download more for free.
Thanks for reading
~Matt

Yes: I too am interested in the software instruments available in Logic Pro: one has to be a bit wary of the jam packs because there don't seem to be many solo instruments included. But I looked at the Logic screen in an Apple store the other day, and it worked like GarageBand in
this respect: you created a new track choosing the software instrument option and a whole lot of instruments came
up in a column on the right: lots of solo wind instruments, plenty of keyboards and guitars of course and not very many solo strings, only one violin, in the world music subsection under Irish fiddle. Yehudi Menuhin
where are you when we need you?
What I've been trying to find out is which part of the purchase does this long list of software instruments arrive with, because it's basically the only reason
I'm interested - I get on fine with gb but it
Just hasn't got enough instruments, and as I say the jam packs don't seem
to resolve this ? Or do they? Could someone please help
me with this?

WIth LabVIEW how do I control an instrument with a RS232 output, using a RS232 to USB converter cable.

WIth LabVIEW how do I control an instrument with a RS232 output, using a RS232 to USB converter cable since I dont have rs232 ports. I have two instruments that I want to control in this manner. One is an Imada ZPS force gage with RS232 output. The other is a Panasonic HL-G103-S-J laser micrometer sensor which is RS422. I've done considerable LabVIEW programming using GPIB but I have no experience with devices like these. Any tutorial or examples would be greatly appreciated.
Thanks.
Solved!
Go to Solution.

I understand that you want to control a device which having RS 232 port as output. If so, you can use an USB-RS232 cable from PC to device and you can control or monitor the device.
See this link http://zone.ni.com/devzone/cda/epd/p/id/2669
Also, first check the device in hyperterminal and then continue to program in labVIEW. You can find the serial VI's in Instrument I/O.

How do I fade one frame into another?

In Flash pro 4 how do I fade out of one keyframe and fade into the next one with a slow transition? thanks.

Try this set alpha to 0. Move ahead 20 frames or how fast or slow you want it.Change the alpha to 100%.Then create motion tween in the button symbol and place the movie clip in the over state.
Then it should fade as the movie plays.You can implement it the way you want it.
Hope this helps
Good Luck!

How do I set an instrument to hold volume in ES2

This seems like a ridiculously easy question, and perhaps I have lost my mind, but how do I change an instrument whose volume dissapates while I am holding the key down to one that holds its volume. I thought this was Decay, but the setting seem to have no effect on the instrument and perhaps some other setting is preventing it. I've compared settings to instruments that hold their volume with the key down and cannot find the variation in settings.

Hi
You need to adjust the Sustain Level of Env3 in the ES2
CCT

How do i fade out a video clip?

how do i fade out a video clip?

ChiDonDada
What version of Premiere Elements are you using and on what computer operating system is it running?
In the absence of that information, I will generalize, tending toward Premiere Elements 11....
a. Right click the Expert workspace Timeline video, select Fade from the pop up menu and then the wanted Fade Audio or Video command.
b. In version 11, you could click on Applied Effects/Applied Effects Palette/Opacity Panel and the shortcut Fades there.
c. You could keyframe the Opacity property in the Applied Effects Palette/Opacity or via the video track content rubberband at the Timeline Level.
Please supply more information for fading in out your video and audio track contents.
Thanks.
ATR
Add On...If you have Premiere Elements 11, you may be interested in the information on these Fades found in one of my blog posts
http://www.atr935.blogspot.com/2013/06/pe11-timeline-fade-out-shortcuts-and.html

How do I fade audio in Final Cut Pro X Version 10.6.8

Hi how do I Fade audio in and out in Final Cut Pro X Version 10.6.8 ?
In previous final cut I could pin point the audio line using the pen tool cannot seem to find it in Final Cut Pro X
Please help?

just like that …
http://help.apple.com/finalcutpro/mac/10.0.6/#ver39580fed

How do i fade a video over another?

on imovie 11 how do i fade a viedo over another video?

To supplement Bengt's excellent advice, see the Apple Help article on "Add transitions between clips". Be sure to view the video (see the heading "Watch the movie"). Here's the link (the article and video also appear in the iMovie menu item "Help>iMovie Help"):
http://help.apple.com/imovie/index.html?lang=en#mova719f373
John

In Edge Animate, how do I fade an image in on mouseover?

In Edge Animate, how do I fade an image in on mouseover?
Thanks!

You can either make a symbol and use a transition in Animate and use play() and playReverse() on mouseenter and mouseleave or you could use animate() on the element for our mouse events.
fadeout
sym.$("elementName").animate({"opacity":0.00},3000);
fadein
sym.$("elementName").animate({"opacity":1.00},3000);

How do you fade text in and out of a still image on Adobe Premiere CS6?

How do you fade text in and out of a still image on Adobe Premiere CS6?

Creating and editing titles

Image zooms in and bounces. How do I fade out?

Getting my feet wet and trying a routine event. Have an image
zooming in and bouncing. That works. What I want to do is fade the
image out after it has stopped bouncing. How do I fade it out? Here
is what I have:

I came up with the below bit of code. But now the image fades
and then re-appears

How to apply FADE to audio track

Just moved to use Logic Pro 8 that I have the following queries:-
1. How to apply FADE/CROSSFADE on audio tracks at the Arrange window?
2. I found keeping to click the Pointer tool & Scissor tool (or Eraser) alternately (the purpose is just delete a part of an audio track) at the Arrange window during audio editing very clumsy, is there any shortcut?
3. I use a MOTU 2408 audio interface, is there anyway I could set the Logic to having:- A. just one mono output instead of stereo pair ( likes 12, 34, 56, or 78) for a track? B. input of a stereo track set to using S/PDIF as my 2408 have this and I sometimes dump things into the computer from a DAT player?
Thank you for your advise.

NNS wrote:
1. How to apply FADE/CROSSFADE on audio tracks at the Arrange window?
You can use the fade tool, or for multiple regions, simply select the regions (you can rubberband them), and use the fade tool box in the upper left hand corner of the arrange page.
NNS wrote:
2. I found keeping to click the Pointer tool & Scissor tool (or Eraser) alternately (the purpose is just delete a part of an audio track) at the Arrange window during audio editing very clumsy, is there any shortcut?
Look over the extensive list of key commands that are available within Logic. You can also assign alternate tools to left/right mouse buttons, or by modifier keys, so you can switch tools quickly, without the need for accessing the toolbox.
NNS wrote:
3. I use a MOTU 2408 audio interface, is there anyway I could set the Logic to having:- A. just one mono output instead of stereo pair ( likes 12, 34, 56, or 78) for a track?
For mono output assignments, simply pan the mono track to the desired side of the output. i.e., track one, set to "Output 1-2", panned hard LEFT, will only appear on your audio interfaces output 1. Panned hard RIGHT, it'll appear only on output 2...
NNS wrote:
B. input of a stereo track set to using S/PDIF as my 2408 have this and I sometimes dump things into the computer from a DAT player?
All audio interfaces with SPDIF inputs have those inputs hardwired. So it's just a matter of you reading the MOTU manual, and seeing what that is. It may be inputs 11-12, or 23-24, etc... Just set the stereo track in Logic to have that particular input, and you should be set.

How do i fade an instrument in?

Similar Messages

Maybe you are looking for