How do I fade audio in ?

I have premiere 10 and would like to know how do I fade in an audio track while fading the first track out without any gaps. As when I try to merge the two pieces of audio it splits the video .

OK, it sounds like you do have muxed Audio & Video (both streams in one Clip).
To temporarily separate the Audio from the Video, Atl+click on the Audio. Then, you can drag it, independently from the Video. Now, unless the Audio is just music, or background, I am not sure that you will want to move it, left, or right, from its Video, as you will then loose sync.
Also, if you need to move a Clip, without that edit affecting other Clips, you can hold down the Ctrl key, to get into Insert Edit mode.
As you are starting out with PrE, Steve Grisetti's Basic Training Series might be a good place to start. He covers Audio in there, though might not touch on exactly what you are needing. However, as he gives an important overview of editing with PrE, he might solve some problems.
Good luck,
Hunt

Similar Messages

How do I fade audio in Final Cut Pro X Version 10.6.8

Hi how do I Fade audio in and out in Final Cut Pro X Version 10.6.8 ?
In previous final cut I could pin point the audio line using the pen tool cannot seem to find it in Final Cut Pro X
Please help?

just like that …
http://help.apple.com/finalcutpro/mac/10.0.6/#ver39580fed

How do I fade out audio in Premiere Elements 13?

HOW DO I FADE OUT AUDIO IN PREMIERE ELEMENTS 13?

ATR
Thanks for answering,
im moving slowely forward in speeding up making presentations by using the new discovered smart tricks or functions.
So you understand my level of expertise:
This step by step production methode im using now give's me controle without the (full) knowledge of all the (smart)functions in this program.and slowely learning the way arround.
starting a project: a mix of photo's and avi's, starting with manual time line filling with the selected files then the timesaving "Standard crosover on all selected".
second: placing a header with the titel at the front and a ending a the end. (cut al the wrong or bad pieces and extend some photo viewingtime if needed.)
And then adding subtitels/tekst and use some other crosovers to highlight the change of subject or stills to movie.
And at last: placing the background music on "soundtrack": after some fiddeling around ive choose to cut the musictrack between the avi's instead of let the music play all the time and adjust the volume down to zero when a avi is playing.
this have two advantages:
1) the songs can be streched by by cut and jumping to the end of the avi soundtrack. (no loss of music through fading out and still let it play so need less musicsongs.)
2) And the rightclick fade function with the standaard fadingtime => "fade out" and "fade in" is easly to use because of the end track avi and begin track music timeline. (And if needed lowering the fading slope/ extend the fading time by moving the "points" on the audio line)
But; its a lot of work and after the first run through the presentation(or watching on TV) and there is a adjustment needed (fadingtime, volume-changes) you have to adjust every bit of the soundtrack. (keeping the volume "feeling" the same is the difficult part.)
I will read about the Smart Mix function and test it on a other project. see of its fits my kind of using and expertise. (every automatic (smart) function needs understanding of its purpes and limitations and there are a lot of them in premiere
What is in your opinion the most effective way of adjusting volume of audio parts across the hole project so its merged in to one audio/soundlevel?
(and offcourse in the hole way of building the presentation.)

How to apply FADE to audio track

Just moved to use Logic Pro 8 that I have the following queries:-
1. How to apply FADE/CROSSFADE on audio tracks at the Arrange window?
2. I found keeping to click the Pointer tool & Scissor tool (or Eraser) alternately (the purpose is just delete a part of an audio track) at the Arrange window during audio editing very clumsy, is there any shortcut?
3. I use a MOTU 2408 audio interface, is there anyway I could set the Logic to having:- A. just one mono output instead of stereo pair ( likes 12, 34, 56, or 78) for a track? B. input of a stereo track set to using S/PDIF as my 2408 have this and I sometimes dump things into the computer from a DAT player?
Thank you for your advise.

NNS wrote:
1. How to apply FADE/CROSSFADE on audio tracks at the Arrange window?
You can use the fade tool, or for multiple regions, simply select the regions (you can rubberband them), and use the fade tool box in the upper left hand corner of the arrange page.
NNS wrote:
2. I found keeping to click the Pointer tool & Scissor tool (or Eraser) alternately (the purpose is just delete a part of an audio track) at the Arrange window during audio editing very clumsy, is there any shortcut?
Look over the extensive list of key commands that are available within Logic. You can also assign alternate tools to left/right mouse buttons, or by modifier keys, so you can switch tools quickly, without the need for accessing the toolbox.
NNS wrote:
3. I use a MOTU 2408 audio interface, is there anyway I could set the Logic to having:- A. just one mono output instead of stereo pair ( likes 12, 34, 56, or 78) for a track?
For mono output assignments, simply pan the mono track to the desired side of the output. i.e., track one, set to "Output 1-2", panned hard LEFT, will only appear on your audio interfaces output 1. Panned hard RIGHT, it'll appear only on output 2...
NNS wrote:
B. input of a stereo track set to using S/PDIF as my 2408 have this and I sometimes dump things into the computer from a DAT player?
All audio interfaces with SPDIF inputs have those inputs hardwired. So it's just a matter of you reading the MOTU manual, and seeing what that is. It may be inputs 11-12, or 23-24, etc... Just set the stereo track in Logic to have that particular input, and you should be set.

How can I fade in/out audio only below a certain frequency?

I have an MP3 made from a MIDI file in which all instruments are unfortunately in a single track. I want to fade the tom part in because I thought it would be easy considering its obvious separation from the marimba part in the Spectral Pitch Display. How can I fade in these lower sounds only without affecting the higher marimba sound?

You need to go back to the MIDI file and adjust the level there - you can't do this after the event unless you use something like the incredibly expensive Melodyne. This can achieve harmonically related event isolation, which Audition doesn't do. Toms don't just exist at one frequency; they have a harmonic spectrum and if you don't capture all of the harmonics, you won't be able to alter the relative level of all of them - which is what you'd need to do. Otherwise it will sound completely wrong.

How do I Fade in/out in Multitrack projects?

Hello. Is is possible to fade audio loops in and out in a Multitrack project? I see the Fade buttons on the tool bar but they are greyed out. I don't know how to do it. Can anyone help me? Thank a bunch. -- John

See that little triangle to the left of the track
names on the track header? Click that, and it will
show the envelope rows for the track.
If you double click on the black line, it will create
an envelope point. Drag these ponts up and down to
change the volume of the track over time.
Thanks A lot, Collings. That was pretty fast and very helpful. I appreciate
you taking the time to answer. Thanks again and Take care.
John.

How do i fade out a video clip?

how do i fade out a video clip?

ChiDonDada
What version of Premiere Elements are you using and on what computer operating system is it running?
In the absence of that information, I will generalize, tending toward Premiere Elements 11....
a. Right click the Expert workspace Timeline video, select Fade from the pop up menu and then the wanted Fade Audio or Video command.
b. In version 11, you could click on Applied Effects/Applied Effects Palette/Opacity Panel and the shortcut Fades there.
c. You could keyframe the Opacity property in the Applied Effects Palette/Opacity or via the video track content rubberband at the Timeline Level.
Please supply more information for fading in out your video and audio track contents.
Thanks.
ATR
Add On...If you have Premiere Elements 11, you may be interested in the information on these Fades found in one of my blog posts
http://www.atr935.blogspot.com/2013/06/pe11-timeline-fade-out-shortcuts-and.html

How do I collapse audio tracks

I'm in FCP X 10.1 and can't figure how to collapse the audio so the black line is remove above the track so I can do cut without getting out of sync (see right side of image). Here's what it looks like. PS what is the view called and how did it happen.

Are you talking about this black bar?
You can't remove that. It's the shelf that connects the secondary storyline that's created when the audio cross fade transition is applied. It connects the two pieces of audio that were separate connected clips, connected to the multicam clip on the primary storyline. It looks like you detached the multicam clip audio from the multicam clip.

How to add an audio widget in IBA?

HI,
I want to record an audio and to add it in IBA.
I know how to make an audio widget and how to add a song from my list of music.
But how could i record my voice? With what? Do Apple offer an application for that?
Tx

How old is your Mac? Did it come with preinstalled iLife applications?
Then you might want to give GarageBand a try.
GarageBand comes with many predefined filters to enhance vocals, or to make it sound like a Life performance, radio effect, like a megaphon, etc. And you have automation curves to adjust the volume, for example to fade the voice out.
Also you can trim and mix several recordings and position the sound along the stereo baseline. This way you can let the voice walk from left right or let a car drive by.
This screenshot shows how to use the predefined effects for voices, the Track pan automation to move the voice from left to right, the track volume automation to adjust the volume, and the "record" button to record a voice on one of the tracks in the time line.
Regards
Léonie

How do you initialize audio player on iPhone 5s iOS8?

I am trying to use Scan & Translate and Translate Photo but the error message that says "Unable to initialize audio player" comes up and cannot use those apps.
How do you initialize audio player on iPhone 5s iOS 8?

Ddeveloper has not updated their app since July.
THey need to update to be ios 8 compatible.
the popup you are getting is the app failing to work, not a direction for you to follow.

How do I get audio input to my TV when using a HDMI adaptor/converter?

I bought a Belkin HDMI converter for my mid-2010 Macbook Pro so that I can watch internet movies on my television. When I plugged the HDMI into the adaptor I am able to see the video play on my television however the sound is still coming through my computer instead of my televsion. How do I get audio input from my computer onto my TV?

You need to set the output in System Preferences > Sound > Output to HDMI.

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.
I've tried plugging the hdmi into the TV directly and the receiver.
I get video every time. HBO to Go , Xfinity, ABC, Youtube, etc...
just no audio. Any suggestions?
I've tried starting the apps then plugging in the hdmi cable.
I never tried this before I upgraded to IOS 5.

Claudiamil-
I had not tried it with mine since upgrading to iOS 5, so I just did. I'm using a small Vizio HDTV. I did not try YouTube, but did try several videos and musical numbers. In all cases there was sound, including stereo when the source had it.
I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down. Dah*veed's suggestion to reset may be what you need.
Fred

How can I stream audio from Apple TV 2 to Airport Express speakers.

how can I stream audio from Apple TV 2 to Airport Express speakers.
I have LCD projector on one wall and connected ATV to it via HDMI.
Speakers on the other wall and connected to APXpress.

To be honest the times we've wanted to have music from more than one set of speakers, I've usually used my mac's iTunes library and controlled it either from the mac or from my phone, since they're not really the times we have any TV on anyway. I've tested AirTunes from the Apple TV but can't recall whether it worked with content from a streaming library.
Now I've got something to do.

How do I download audio cd's to my macbook pro?

how do I download audio cd's to my macbook pro?

LexSchellings wrote:
Assuming you still have the CD's and they are still readable:
Delete everything "jumbled" from your iTunes Library.
Insert the CD, and do not read them into iTunes, but copy them instead into a folder with the name you want in your iTunes Library afterwards, insert the next CD and copy it into a second folder (different name), etc.
Then put the first folder into Yourname/Music/iTunes/iTunes Music/Automatically Add To iTunes folder.
Start iTunes and see it appear in the iTunes Library. Close iTunes, do the same with the next folder, etcetera
That was excessively complicated, and NOT how you import CD's into iTunes. I have imported nearly 1000 CD's into iTunes and never once, not once, have I fulled around with folders. That is done in preferences. That's not how iTunes works. William needs to post his question to the iTunes for Mac forum, where much easier solutions will be provided.

How do I add audio books to my shuffle

How do I add audio books to my shuffle

If this is a 4th (or 3rd) gen shuffle, and you use automatic syncing for loading songs... Select the shuffle in iTunes. There is a row of "tabs" (buttons) starting with Summary. Click on Books there. This is the Books tab, where you tell iTunes how to sync audiobooks to the shuffle. Set it up as desired, and click Apply.
NOTE: If your shuffle is currently NOT set up for automatic syncing, its content will be replaced by content selected in the sync settings.
If you are NOT using automatic syncing for songs, so you have been loading songs manually by dragging them to the shuffle in iTunes, then you should NOT do the above. Instead, you can load audiobooks the same way. Drag the books you want to the shuffle from your Books library in iTunes.
If this is a 1st or 2nd gen shuffle, it is different. Please post back.

How do I fade audio in ?

Similar Messages

Maybe you are looking for