How do I fill the unused space?

Hi there,
            I have an issue whereby I can not get the screen to use the unused space on the side of my presenter area.
I have a big gray empty section on the right hand side and this makes my charts too small in the middle.
Can any one tell me how to use the entire space available?
I have tried to resize the screen resolution , tried using presenter area only tried clicking and dragging it wider but cant seem to get it to fill the gray area on the right hand side.
I have attached a chart to show you what I mean.
Thanx

Hi there,
            Thanx for the answer...the problem is my members do see this area...that screen shot was sent to me from a member.
They all can see that gray area which is why I am trying to fix it.
I am a complete newbie to this software and so am still trying to make head or tail of the multitudious manuals and tutorials...
would it be possible for you to post a step for step how to maximize the area seen by the members? I have attached a chart here sent to me from the same member of another connect pro room that uses all the space, have a look at their space usage...its fills the box and their off stage area on the right is very much smaller than mine.
thanx

Similar Messages

  • How do I reclaim the unused space after a huge data delete- very urgent

    Hello all,
    How do I reclaim the unused space after a huge data delete?
    alter table "ODB"."BLOB_TABLE" shrink space; This couldn't execute with ora 10662 error. Could you please help

    'Shrink space' has requirements:
    shrink_clause
    The shrink clause lets you manually shrink space in a table, index-organized table or its overflow segment, index, partition, subpartition, LOB segment, materialized view, or materialized view log. This clause is valid only for segments in tablespaces with automatic segment management. By default, Oracle Database compacts the segment, adjusts the high water mark, and releases the recuperated space immediately.
    Compacting the segment requires row movement. Therefore, you must enable row movement for the object you want to shrink before specifying this clause. Further, if your application has any rowid-based triggers, you should disable them before issuing this clause.
    Werner

  • How can I fill the blank space in the example below?

    I have to fill using sql statement the blank space with the same description that appears below that belong to the same STTCKT. I
    am using a temporary table.

    There is no need in ROW_NUMBER. You can use simple query like below sample which cost 6% relative to the use of ROW_NUMBER which cost 94% (sort is havy operation with no index).
    DDL+DML:
    CREATE TABLE test( [STBK#] varchar(50), STTCKT int)
    truncate table test
    Insert into test values
    (null, 48035)
    ,('First Two Truck', 48035)
    ,(null, 48039)
    ,('First Two Truck', 48039)
    ,(null, 48046)
    ,('First Two Truck', 48046)
    ,(null, 48054)
    ,('KLS LOGISTIC, INC.', 48054)
    GO
    select * from test
    GO
    If all you need is SELECT with FILL then check this:
    select
    --[STBK#] ,
    STTCKT, [Fixed_STBK#]
    from test T1
    Cross APPLY (SELECT TOP 1 T.[STBK#] FROM test T WHERE T.STTCKT = T1.STTCKT and T.STBK# IS NOT NULL) T2 ([Fixed_STBK#])
    And you can use this query as well without CROSS APPLY
    select
    --T1.[STBK#] ,
    T1.STTCKT, T2.[Fixed_STBK#]
    from test T1
    LEFT JOIN (SELECT T.STTCKT,MAX(T.[STBK#]) [Fixed_STBK#] FROM test T GROUP BY T.STTCKT) T2 ON T1.STTCKT = T2.STTCKT
    If you are looking for update the original table please check this:
    UPDATE test
    SET [STBK#] = T2.[Fixed_STBK#]
    FROM test T1
    Cross APPLY (SELECT TOP 1 T.[STBK#] FROM test T WHERE T.STTCKT = T1.STTCKT and T.[STBK#] IS NOT NULL) T2 ([Fixed_STBK#])
    WHERE T1.[STBK#] IS NULL
    GO
    I hope this is helpful and answer your need, If not please try to clrify your needs and post your DDL+DML
    [Personal Site] [Blog] [Facebook]

  • How can I add dots after text to fill the remaining space in a table cell?

    What is the most efficient way to add dots after text to fill the remaining space in a table cell? I know it is possible using tabs but is this possible using a table?

    You can put a tab inside a table cell using Option+Tab
    Then just set the right-aligned tab stop and the right edge of the table cell and add the leader.

  • I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff.  How can I clear the memory space used by my deleted videos and photos?

    I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff.  How can I clear the memory space used by my deleted videos and photos?  I don't know why the photos are still taking up space and if I will have to reset my phone to get rid of the problem.

    Hey there TowneJ,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting tips that’ll likely resolve the issue that you’ve described, where deleted files appear to be taking up space on your iPhone 5.
    If you get a "Not enough free space" alert on your iPhone, iPad, or iPod touch - Apple Support
    So long,
    -Jason

  • How do you remove the extra space from the top margin when printing from a website? Already reset Firefox and checked my settings. Using Firefox 18 & Windows 8

    I have a 2" space at the top of pages that I print from websites. How do I remove the extra space? My margin settings are at .5"

    laderamacguy took a look at it and added a black shape over the tab. he suggested i use a different template next time, such as the black template.

  • HOW to find out the tablespace space utilized by a patch after applying the

    someone has already applied the patch in test env before recording the tablespace size , so I cannot find out the figure in test env.
    So is there any general practice or general guidelines on it?
    hOW to find out the tablespace space utilized by a patch after applying the patch?
    Thanks & Regards,
    Sree.
    Edited by: 846579 on Mar 22, 2011 10:50 PM

    I think there is no direct way to determine what tablespace is utilized by a patch from the README file. You could check the content of the patch file and see what modules are affected (assuming there are changes and the database level), then query DBA_USERS (DEFAULT_TABLESPACE column) for those schemas which are updated by a patch. Or, you could check the size of the tablespaces before and after applying the patch and you will determine what tablespaces have been utilized (provided that the application services are down, and none of the application users is connected to the application).
    Thanks,
    Hussein

  • Connected to tv.how do you fill the screen with the ipad

    Have connected to tv all ok but how do you fill the screen with the mirror image from the ipad

    Yes I have the iPad cable bought from apple

  • How do I remove the white space from the bottom and side of my document?

    How do I remove the white space from the bottom and side of my document? (I'm not talking about printing, just viewing it on the screen.) There are about 6 inches of white space at the bottom and at the right hand side. I don't like this. On a blank new spreadsheet it's triple that amount of white space.

    The infinite canvas convention doesn't make a lot of sense for Numbers. When I'm viewing a spreadsheet and mistakenly scroll into white, empty space I think, "this is ridiculous - all of my content is fits on one screen. there's nothing over there."
    A (relatively) infinite canvas is logical for Microsft Excel because it's one big table. There are 256(?) columns by default and hundreds of rows on a sheet - there are cells outside what a user is looking at to see. However, when viewing a Numbers spreadsheet with a single 10 column 10 row table that fits on the screen, there's nothing else on it to scroll to.
    Numbers should distinguish between viewing a spreadsheet and editing one. When I'm just viewing, when there's no content outside the window it shouldn't scroll there. This window behavior is beyond annoying for Numbers on my iPad and iPhone.
    (Adding user-defined canvas size setting to my view mode / edit mode thinking would probably be the most complete solution to this now that I think about it.)
    Until now the way scrolling worked in Numbers has defied logic. Actually it still does lol. That said, thank you Yellowbox for providing a clear explanation. Much appreciated.

  • To create apple US account i followed all the steps including none in the payment option. i dont have US address how should i fill the fields.

    to create apple US account i followed all the steps including none in the payment option. i dont have US address how should i fill the fields.

    You need to be in a country to use its store - if you are not in the US with a US billing address then you cannot use the US store.
    From the US store's terms of use :
    The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance.

  • Content from my Apple TV only displays on about 50% of the screen on my 40" 1080p flatcreen.  How do I fill the screen with content?

    Content from Apple TV 2 only displays in about 50% of the screen on my 40" 1080p flatscreen.  How do I fill the screen with content?

    Check  TV remote for an aspect ratio control (occssionally zoom) and set to 16:9.

  • When Importing Images, How Do I Remove The White Space Around The Corners?

    When Importing Images, How Do I Remove The White Space Around
    The Corners?

    u may use magic wand (and magic wand setting) from Lasson
    Tool to select and delete that white space, but u must break a part
    to the picture first.

  • Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. How can I increase the storage space?

    Question
    Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. I delete emails from the Inbox and the Sent and Trash boxes to overcome this. How can I increase the storage space to stop this happening?

    Hi terrybohle1938,
    Firefox is a web browser. It provides access to online content. Things like your email are handled by the content provider. Who is your email provider? You'll have better luck consulting their documentation.
    That being said, deleting only email is a great way to free up space. Another option would be to purchase a "Premium" account if your email provider offers this service. Many times more storage space is offered as part of paid subscription.
    Hopefully this helps!

  • How can i fill the iTunes Connect ITIN?

    Hi,
    i am trying to sell the book on iBookstore but i can't find tge way how can i fill the ITIN on form.
    i am living in istanbul.
    i am non-US person.
    Any idea?
    Any help?
    Thanks.

    You would need to try to contact support for content providers, the standard support system at apple wouldn't be able to help much with this as they pretty much handle the consumer end of support and not the provider/developer, Only support for that I could find is available at http://www.apple.com/itunes/content-providers/

  • My time capsule backup space is full yet, how can i extend the backup space?

    how can i extend the backup space?

    Two possibilities:
    Add a new USB hard drive to the Time Capsule and start a new full backup and move forward from that point.
    (Unfortunately, it is not possible to have Time Machine simply continue backups on a new drive. You have to start over with a new full backup.)
    Or, if you decide that you really do not need all the old backups on the Time Capsule, the disk can be erased and you can start over with a new full backup and move forward.

Maybe you are looking for