How do I find 3rd party soft synths in logic_pro 8?

I have just purchased Korg Legacy Digital Edition M1, Wavestation, MDE X, Soft synths & effects, It seams to have installed ok but i can't get it to show up in a logic project when I add a new track, then search for the synth as an instrument plug in.
The korg folder is in Applications, and not in the main music folder like logic, itunes, garage band etc.
I can find the korg folder ok but can't access the instruments as they are greyed out.
The two synths work fine when used in stand alone. Perhaps I should have chosen custom install to make sure they were installed as audio units for plug in use?
I checked the logic manual about 3rd party plug ins and checked the audio units validation list under preferences/audio units manager and only apple plug ins showed up, no sign of korg synths...
I didn't click scan and reset as I'm not sure if I should.
The korg synths are the only 3rd party products that I have installed on the Mac.
Hopefully it's just a simple procedure that lm not following and a little advice is all I require to resolve my problem.
The korg user group web site said the don't support my syncrosoft license version any more so there were no updates upon installation, perhaps I have purchased a product at the end of its shelf life?
Cheers,
Beatdadnz...

jnashguitar wrote:
Why don't the Logic pirates just start their own message board with their own FAQ:
No kidding, I'm getting sick of this B.S.
It's like the Cubase boards 10-12 years ago.
Legit users... please stop supporting/answering questions people who obviously......
1. Are to ***** lazy to read the manuals.
2. Have pirated the software (plus a few hundred plugins) and barely know what to do with either the plugins or the program. It's pretty easy to tell.
3. *****s
pancenter-

Similar Messages

How can i get 3rd party plugins for logic such as massive or nexus?

how can i get 3rd party plugins for logic such as massive or nexus?

Buy the 64bit AU versions from their respective online stores...
Massive can be found at;
http://www.native-instruments.com/en/products/komplete/synths-samplers/massive/p ricing/?content=2115
Nexus 2 (as Nexus 1 will not work with Logic Pro X) from;
http://refx.com/products/nexus/summary/
However, I suspect, based on the fact you could have simply searched on Google.. that buying them wasn't what you had in mind.................

How do I get 3rd party photo software to work when logged in as myself?

As someone who works with expensively in photography, Aperture is one of my main software programs for processing photos, Now, with Apple apparently no longer supporting Aperture in the near future, I need to find a replacement. I have spent years avoiding anything made by Adobe except Reader, but bit the bullet and purchased an out of the box (not monthly rental) version of Lightroom, When I opened it after downloading, it didn't work. I kept getting an error message about the modules not changing properly. After searching for an extended period of time for how to contact Adobe tech support by phone, I was left to attempt to find a fix through their support community similar to this one. I received a couple of emails that attempted to help, but none of them worked, or allowed me to use the program at all, until it was suggested I log out and then log back in as another user to see if that works. So I did that and redownloaded the software as the new user and it worked perfectly.
But when I logged back out and then back in as myself, I was back to the same issue as before and I still can't use it as myself. This is highly problematic, given the number of photos I have access to when logged in as myself. Besides, I want to be me, not a different person.
Is there anyone out there that can give me a "For Dummies" explanation of how to get the stupid software to work as myself instead as someone else? I already tried several times to uninstall and then redownload the program, but that didn't help. (God, I hate Adobe software!)
Thanks for any assistance you can give.

Frank:
You make good points. Please allow me to make a couple myself:
1. I am a serious photographer. And the first place I go with my RAW files is Aperture. I love Aperture. I also understand that it's not going away, so I will continue to use it. But if all the articles appearing in photography-related publications are correct, it eventually will be far behind newer versions of other photography software. It would be similar to something like if all my friends were using Mavericks OS, but I continued to use Panther OS. They would be far ahead of me in ability to do terrific stuff. Should the prognosticators prove correct about Aperture, then I will eventually need a replacement to stay current. In reading a plethora of articles, many of which were comparative from one photo app to another, I reluctantly decided to go with Lightroom. I dislike Adobe, hence, my reluctance. But it seemed the best of a series of poor replacements for Aperture. I didn't want to pay Adobe an annual fee equal to the cost of a single out of the box Lightroom product, so I did go out of the box in this instance. And my thought is that while I will continue to use Aperture for the near future, it might behoove me to practice on Lightroom so I am familiar with it if I eventually abandon Aperture.
2. Your second point is that this is an Apple forum, not an Adobe forum. Point taken. I have always gotten terrific assistance when I come here for help. I went to the similar community in Adobe and the responses I got there were not as functionally helpful as what I usually get here. And since it seemed that it was eventually found to be a user issue, rather than a software issue, it would seem that a community of Apple users would be of more assistance than a community of 3rd party software users. So I came here. And what do you know? It seems that the information I received here was far superior/helpful to what I got over there. It turns out my faith in the Apple community was well-placed.
When I get back home from work this evening, I'm going to take the info I received from Leonie and yourself and attempt to resolve my user issue. I'm keeping my fingers crossed.

How to use a 3rd party source control tool with RoboHelp?

Hello,
I would like to set our RoboHelp users up with source control. They are using RoboHelp HTML 8.0.
Our software developers are using the AccuRev scm system; I'd like the doc team to use AccuRev, too.
Can someone direct me to RoboHelp documentation that explains how to set up and use a 3rd party scm system with RoboHelp?
Thank you,
Marilyn

It appears that RoboHelp 7 only sees the first SCC provider listed in the Windows Registry and ignores the rest. I was able to get RoboHelp to display the File | Version Control menu for SourceGear Vault by setting the following two Registry keys and removing keys for other SCC providers (SourceSafe, Surround SCM, and others I am evaluating).
HKEY_LOCAL_MACHINE\SOFTWARE\SourceCodeControlProvider
     ProviderRegKey = \Software\SourceGear\Vault Client
HKEY_LOCAL_MACHINE\SOFTWARE\SourceCodeControlProvider\InstalledSCCProviders
     SourceGear Vault VS2003 Compatible Client = SOFTWARE\SourceGear\Vault Client
If I create a new RoboHelp project, save it, then select File | Version Control | Add to Version Control, RoboHelp does the following:
     - pops up the Select Version Control Provider dialog and displays SourceGear Vault Classic Client.
     - I select that, check "Make this my default selection" checkbox, and click OK.
     - RoboHelp crashes.
I'm using SourceGear Vault 5.02 under Windows 7 Ultimate 32-bit. A search of the SourceGear Vault knowledge base reveals that they do not support RoboHelp because of its incorrect behavior and instability. It's so sad that RoboHelp can't work properly with industry standard SCC providers. Vault is by far the best SourceSafe replacement out there, and very affordable.

How to do a 3rd party sales process

How to do 3rd party sales process.....
plz reply me with the full configuration.....

THIRD PARTY SCENARIO
in third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
Process Flow
the processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
Processing Third-Party Orders in Sales
Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
Automatic third-party order processing:-
if a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
Manual third-party order processing
In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
Processing Third-Party Orders in Purchasing
when you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
you process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
Billing Third-Party Orders
If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
Process Flow
During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
Prerequisites for 3rd party sales,
Purchasing org,
purchasing group,
assign the Purchase org to company code
assign Purchase org to plant,
should not maintain the stock in material, it should be trading goods,
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Click on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save

I am working with Acrobat 9 Extended Pro. How do you edit 3rd party pdf files?? Some do not allow.

I've been attempting to modify a 3rd party, original form purchase agreement -- so I may complete it with answers and save in my system for future submital or more editing. The form I'm attempting to complete with my laptop .. turns blue (converts to photo storage?) and makes it impossible for me to edit.
How do I edit under Acrobat 9 Extended Pro software -- Please advise ASAP.
Paul Johnson

You could add form fields or comment annotations. If you want to modify the text directly you may need to OCR the pdf and convert it to a text or Word document, edit the text, then make a new PDF.

How to publish a 3rd party webservice ?

Hi Guys,
I have a wsdl file of the 3rd party webservice and now i need to consume this service in ABAP on ECC 6.0.
I am following the video presentation by Thomas Jung
/people/thomas.jung/blog/2007/12/17/consuming-services-with-abap
while doing so the service already exists in SOAMANAGER under services so that it will be aviable for consuming. How can i make my 3rd party WSDL to be available there. Do i need to publish my service ?
any suggestions or ideas would be appreciated
Thanks,
Raj

Hi Rajeev,
I have consumed the the 3rd party WSDL and created the consumer proxy object with out publishing the service.
I have tried to define the Logical Port for this proxy in the SOAMANAGER and when i have provided all the details of the URL and Login details for the WSDL access settings with the option HTTP access.
I am getting the errros as below
SRT Framework Exception: Error in WSDL access: Exception occured in communication Framework:
Error in HTTP Framework:
I have tried the same URL in the browser with the login details and i am able to access the WSDL but from different server.
I am tryinng all these by logging into ECC 6.0 from the webgui on a different server. Do you think the actual ECC 6.0 server from where the request goes the might be blocked?
any help or suggestions would be appreciated
Thanks,
Raj

How can I include 3rd party jar files with my custom extention?

I'm writing an extension that is dependent upon some 3rd party jars. How can I include/package these with my extension?
we're using the 11g tech preview
thanks,
Dylan

Do you mean that you need these files to appear in JDeveloper as a library available for the developers who build a project and use your extension?
You can create a library in JDeveloper with JAR files by simply adding the following to your extension.xml file:
<jdeveloper-hook xmlns="http://xmlns.oracle.com/jdeveloper/1013/extension">
- <libraries xmlns="http://xmlns.oracle.com/jdeveloper/1013/jdev-libraries">
<library name="My Extension Library">
<classpath> ${ide.extension.install.home}/lib/some.jar</classpath>
</library>
</jdeveloper-hook>

How will FCPX implement 3rd Party Plug-ins?

From a Professional standpoint, the current version of FCPX is unusable on so many levels due to the absence of basic features that made FCP series the juggernaut it was until yesterday.
Here's my prediction of HOW Apple plans to distribute Plug-ins and Add-ons:
Apple is pushing towards a single, universal OS -- most likely a glorified iOS. And they're forcing FCPX users to upgrade to Lion so they have Appstore on their machines just to buy FCPX. Matter of fact, theyi're seeing more profit from Appstore/iTunes than their own computers! Ever since the success of the Appstore -- Apple/Jobs has been pushing to create products and services that will bring even more profit to the Appstore/iTunes business model.
Hence the release of the iPad and the development of iPad apps -- and the move to with OSX Lion.
The reason for this is so that Apple can take their flagship software like FCP --- and monetize all 3rd-party plug-ins and add-ons.
SO, once Apple has a consumer using FCPX, if they want Multi-cam or Import/Export features -- you will have to buy it as an add-on and sell all FCPX plug-ins and add-ons THROUGH THE APPSTORE.
Furthermore -- Apple will most likely force all 3rd-party developers to build plug-ins for FCPX as an APP -- and sell it THROUGH THE APPSTORE -- where Apple gets 30% commission -- stealing that money away from the developers, who in the past with FCP7, you were able to purchase directly from the developer.
SO -- FCPX isn't a revolution in editing....
FCPX is a revolution in MONETIZING FINAL CUT PRO PLUG-INS through the APPSTORE!

Apple is pushing towards a single, universal OS -- most likely a glorified iOS.
No they are not. OS X is a far more developed, powerful and mature OS than iOS. There is no sign that it is being some reduced in power in any way.There's a whole lot of fokks claiming it is simply because a few interface features from iOS are being added - note added - to OS X.
And they're forcing FCPX users to upgrade to Lion so they have Appstore on their machines just to buy FCPX.
Well I hate the argue but that's factually untrue as well. No FCPX users are not forced to upgrade to Lion. Snow Leopard users can buy FCPX today, long before Lion is introduced.
Regards
TD

How do you install 3rd party plug-in in Photoshop CC

Our fine customer service/tech support wouldn't help me with my question/problem because 3rd party plug-ins are not an Adobe product.... Silly, isn't it since all I want to know is how do you install "any" plug-ins into Adobe Photoshop CC. Can anyone with any sanity here offer a solution?
Thanks.

It could be complex depending on your OS and user ID permissions. Adobe Photoshop CC Mac version only supports new Mac with Intel 64bit processors, Photoshop CC windows supports both 64 bit systems and 32 bit systems. If you have a 64 bit system both the 32 bit and 64 bit version of Photoshop are installed so windows has both a 32 bit Plug-in Folder and a 64 Bit Plug-in Folder. Prior to CC Photoshop Preference let you add you own Plug-in folder tree to Photoshop Plug-in folder tree. I still install Plug-in that way however I have to add the link manually for adobe removed that option from its Preferences UI in Photoshop CC. I always have more the one versions of Photoshop and all installed versions use the same Plug-in, Actions and Scripts that I add to Photoshop. There is One exception. The Way the Image Processor Pro plug-in script is coded expects it and it default XML file to be installed into Adobe's folder so I made and exception for it. You user ID need to have permission to modify and add files to system folders if you want to install plug-ins into the folders that Adobe created for third party plug-ins to be installed into.
Adobe Photoshop CC installer creates a folder in Photoshop version ...\Plug-ins\... so on my Window 7 64 bit system there are two folders
"C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\" and
"C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Plug-ins\"
All I add to these are the Adobe ScriptListener.8li Plug-in and a link to my Plug-ins folder.

How can i authorise 3rd party products

I want to include a couple of 3rd party features on my BC site. Each requires a user to login, if I already have my visitor logged into a secure zone, how can I pass that authorisation on to the 3rd party modules so my visitors don't have to login separately to BC and the 3rd party modules.

There are a wide range of 3rd party modules, well beyond what BC provides, most i can use unless login is required by the user (i wantvto avoid the user having to sign separately into multiple services). but the two specific ones I want to use now are
Discourse
https://meta.discourse.org/t/configuring-google-oauth2-login-for-discourse/15858
https://meta.discourse.org/t/official-single-sign-on-for-discourse/13045
Even BC's own forum module requires the user to create a separate login just for the forum
And App42
http://api.shephertz.com/tutorial/Securing-Your-App/index=security-acl
I'm a long time user of BC but need to extend it beyond its current feature set.
The alternative is to use the login of one of the 3rd party services and use that to login to the BC secure zone (can that be done).

How 7921 interface with 3rd party; guest service contact center?

I want to use 7921 for staff in hotel to get sms from "guest service contact center", how to do the interface?

You can write an application to push text to 7921, using CiscoIPPhoneExecute and CiscoIPPhoneText object. Check out Cisco's SDK for more information about using these objects.
There are 3rd party products, like PhoneTop Messenger, which allow you to push text/audio to Cisco IP phones.

How does CHARM handle 3rd party provided exteranl transports

Frequently some vendors (e.g. BSI , etc) will provide some transports for ECC.
How to use CHARM to handle those 3rd party external tp?
Thanks for your help.

You can import the transports manually to your Dev (save the data files and cofiles in the same /usr/sap/trans and use STMS to add to buffer, you may have to change the project status switch for that), then create a CR document in SolMan as usual, create transport(s) from SolMan and include the external transport(s).
Regards,
Raquel

How can I restore 3rd party app data from my backup in the cloud

First a brief history. I use the iCloud to backup my iPad 2 and hardly ever synch it to itunes on my computer. I got the new iPad and restored the backup of my iPad 2 onto it. All was fine except that an issue I had on my iPad 2's Safari had transferred over to my new iPad. That's is for another discussion. Anyhow I went to the genius bar and they said to just setup my new iPad as a new device and then manually install everything back on it. Stuff like mail, contacts, etc, would be reloaded from the cloud. So I did and I noticed that one of my 3rd party apps, MadPad, had none of my saved data. Does anyone know of a way to restore 3rd party app data from the iCloud? Is there some sort of utility out there that would do this? I don't want to restore it from my previous iPad 2 backup because it will reintroduce the Safari problem back onto my new iPad.
Thanks!

Assuming that you even have a backup with the data in it, you have no choice but to use a backup in order to restore that data. That is the idea behind backing up to iCloud. If that is the only backup that you have - then that is the one that you have to use.
But if the backup is bad - or had corrupt data - then you will end up with the corrupt data again. You cannot selectively restore app data from a backup. you restore all settings and data - or nothing at all.

How can I accept 3rd party license agreement on pdf files?

I was sent my tax return by my accountant. It is an adobe reader XI pdf file. I can not open the file because it wants me to accept a 3rd party pc license agreement to open the pdf file.
There is no hyperlink prompt to accept the license agreement with, and i have a completely unviewable pdf file tax return now.
I need to be able to view the paf tax return.
Why would adobe create a document and ask for an accept prompt from me without providing the prompt for me to click on?

Can't really visualise this. Can you post a screen shot of the message (but not if there are any personal details on screen)?

How do I find 3rd party soft synths in logic_pro 8?

Similar Messages

Maybe you are looking for