How do I find and configure the new 'global network proxy' feature in iOS 6?

The 'global network proxy' is listed as a new feature in iOS 6 but is not explained anywhere. I can't see how to set it up on the phone either.
It sounds like it might be the ideal feature I'm looking for. That is, when I connect to a random new open WIFI point, I would like a default HTTP proxy to use, rather than manually entering the same proxy for each access point that I connect to.
Is this possible? Is there any documentation for this new feature anywhere?

The old iTunes library was lost with the old PC. However, it all that music and content is still on your iPod there are many ways you can extract this content from the iPod and import it back into iTunes.
Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the new PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Similar Messages

How do I find and install the new Watermark plug-in?

I'm using Ps CC and have discovered that there is some kind of new watermark plug in but I can't find it, plus I can't find the plug-in installer. I already have my watermark designed, but I want to batch process addding it to multiple folders at a time. I've tried some action sets I found, but there must be some tricks I don't know. I did find one plug in (Adobe watermark 222) but I get an error message when I try to run it. Says it's only good for versions between 12 and 14???
Thanks.
I did successfully install the digimarc plug-in months ago.

Digimarc is a plug-in that places an invisible watermark into your images. I think what you may be referring to when you write new kind of watermark you may be referring to the Watermark panel for CS5, CS6 and CC which add your visible watermarks to image. There is nothing new about visible watermarks and IMO the panel is a hassle to use. Its easer to create an action that will watermark any size image and use it then maintain different size watermarks to be applied by some Photoshop panel or go through multiple steps in a panel. You can find that panel download here http://russellbrown.com/images/tips_downloads/Adobe_Watermark_222.zip and watch a video about it here http://av.adobe.com/russellbrown/Watermark_SM.mov

For my new Airport TC I have an error this version of AirPort Utility doesn't support this AirPort wireless device. How do I find and download the latest version of AirPort Utility?

For my new Airport TC I have an error this version of AirPort Utility doesn't support this AirPort wireless device. How do I find and download the latest version of AirPort Utility?

https://itunes.apple.com/us/app/airport-utility/id427276530
AirPort Utility for iOS requires iOS 5 or later.
AirPort Utility 6 requires OS X 10.7.5 or later.

I used Duplicate Annihilator to isolate dups in iPhoto on my iMac. At the end it told me it had marked the word duplicate in the comments / description field. How do I find and delete the marked photos?

I used Duplicate Annihilator to isolate dups in iPhoto on my iMac. At the end of its search, it told me it had marked the word duplicate in the comments / description field. How do I find and delete the marked photos?

File -> New Smart Album
Description -> contains -> Duplicate
will find them.
Then the keystroke to delete depends on which version of iPhoto you have. All the keyboard shortcuts are under the Help menu.

How can i add and configure a new AIR-LAP1142N-E-K9 Access Point to a AIR-WLC4402-12-K9 WLAN controller

How can i add and configure a new AIR-LAP1142N-E-K9 Access Point to a AIR-WLC4402-12-K9 WLAN controller

Thanks alot, that helped me .....
what about option 43..i am using one wlc and the switch where wlac and APs are connected is playing the role of dhcp server used by APs as there is a dhcp pool configured. please advise. will the command be
option 43 hex (f104xxxxxxxxxxxx) f104 adding to it the management ip address of the wlac in hexadecimal.
if the ip address is 192.168.10.5 then the command will be
option 43 hex f104c0a80a05
please correct me if i am wrong!!!!

How do I find and open the CD folder on a 13" macbook pro??

How do I find and open the Cd folder on a 13" macbook pro , so I can read the content on the cd with pages.

If the CD is not showing on the desktop, go to Finder on the menu bar, Preferences, General and check the box for CDs, DVDs,and iPods. Then double click the image of the CD on the desktop to open and display the contents of the CD.

How do I find and use the "Spotlight Effect" in PS6?

How do I find and use the "Spotlight Effect" in PS6? I was using it yesterday and now I can find it ... help!

Hi,
I'll start with the most basic qusetion if you have Spot selected from the dropdown in the Lighting Effects Properties.
There are also some presets under Presets including a Default Setting.

How do I find and save the background music file of my Flash site?

I see that the background music in my Flash site is located in a symbol called muz. When I click the properties of this symbol, the sound file's location is listed as .\flash\sound\muz.wav I couldn't find that sound sub-folder in the flash folder nor could I find the file. I tried doing a search to look for the muz.wav file in my computer but it could not be found. Does anyone know how I can find and save this file? Can the symbol somehow be exported and the sound file be extracted that way?

I copied and pasted the symbol into an empty .fla file. This new .fla file is just 1 frame. Can you tell me what you mean by "spreading" it along the timeline? When I tried exporting it to a .wav file (as just 1 frame in timeline), I only hear a fraction of a fraction of the first note of the music in the generated .wav file. The music is heard fine in its entirety when previewing the .fla file (F12).
By the way, in the symbol's properties, there is an option to "Export for ActionScript" and an option to "Export for runtime sharing". Do you think any of these would work?

HT4059 How do I find and download the ios5?

How do I find and download ios5 so I can download an iBook?

IPhone, iPod Touch, and iPad iOS Compatibility
     Device                                       iOS Verson
iPhone 1                                       iOS 3.1.3
iPhone 3G                                    iOS 4.2.1
iPhone 3GS                                 iOS 6.1
iPhone 4                                       iOS 6.1
iPhone 4S                                    iOS 6.1
iPhone 5                                       iOS 6.1
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1
iPod Touch 5                               iOS 6.1
iPad 1                                           iOS 5.1.1
iPad 2                                           iOS 6.1
iPad 3                                           iOS 6.1
iPad 4                                           iOS 6.1
iPad Mini                                      iOS 6.1
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Laptop crashed. new laptop has windows 8. how do I find and move the old files to the new laptop?

My Windows 7 laptop crashed. New laptop is Windows 8.1. I have the hard drive from the old laptop. Where can I find my old emails and address books and where do I copy them in Windows 8 ?

Thunderbird stores all personal information such as messages, address books and configuration settings in a folder called the profile
Take Profile Backup and Restore to New Computer
*https://support.mozilla.org/en-US/kb/moving-thunderbird-data-to-a-new-computer
*http://www-archive.mozilla.org/support/thunderbird/profile
*http://kb.mozillazine.org/Profile_folder_-_Thunderbird
*https://support.mozilla.org/en-US/kb/profiles-tb

My laptop crashed. I have the disk (intact). How do I find and move the inbox files (not local folders) of my three pop3 accounts to the new laptop?

Old laptop had Thunderbird. THe laptop stopped working, so I took the C drive (SATA disk) and and plugged that to a USB port.
New laptop has Thunderbird installed, local folders have been restored. The inbox contents are missing (I use the option "download from server", so the recent correspondence is there.
I have three POP3 accounts, so I am trying to identify the location of three separate "inbox" and "Sent" folders, and add them to the new installation.
Where are those files stored, and what would be the simple way to restore them on the new laptop?

So this seemed to result in the outcome I wanted:
- Find the old Thunderbird profile location (.../AppData/Roaming ... THunderbird/Profiles/...default/Mail/first.account.domain/Inbox
- FInd the same location on the New laptop
Copy the first (old, backup) inbox to a new file in the New profile folder; I did Inbox.bak
Start TBird - and lo and behold, I have folders "Inbox" (recent mail since the old laptop crash) and "Inbox.bak" (the mail I thought was lost).
Looks like I need to add all accounts to the New TBird first so that it creates the profiles, and after that copy the backup Inbox & Sent files to the new profile folders.
This worked for me. Not very elegant, with several manual steps, but end result is what I needed.
It would be great if there was a smoother way for disaster recovery.
And yes, I should have had better backup policy in place. For everyone's benefit - I do Data Center systems for a living, and have seen far too many "backup" services which do not actually work in a restore situation. That's why my personal backups are direct file copies on large disks. It works, but leaves room for manual error, which is what happened here.
Actual folders, btw, I keep where I see them - "c:\users\username\Thunderbird" - for this very reason.

How do i find and delete the hidden .trashes folder on my sd card?

I just recently bought a new canon 600d camera and i also bought a new 16gb sd card for it.
I use this camera for videos mostly.
My card seems to fill up incredibly quickly and when i empty it, it stills says about 600mb is taken up. I looked it up and apparently its because of a hidden folder called .trashes? I cant figure out how to find this folder or how to delete it.
Ive seen a few people say you can find it somehow using finder, but my issue is that my camera doesnt show up in the finder, a program called image capture comes up and i can import all my videos from there perfectly fine.
this problem is really annoying me because even when my sd card says its 849mb full, after recording two or three clips, my camera stops recording automatically due to the card being almost full even though its nowhere near full and i have 14.9 gb left?
Im really confused and i just need some guidance on how to go about finding this .trashes file and deleting it.
As you can tell im not too great with technology so any help would be appreciated, thanks.
apologies if this question isnt in the right place, ive never really used this before.

i imported all the files in my sd card to my mac and then i did format the card, it says 160kb is used up.
I also did find files in the trash when i connected the camera to the macbook and deleted them all, there is nothing left in the camera or the trash and it still says 160kb used :/

How do I find and free the hidden files on external drive?

I cannot see , or free, space on my external drive.
It is a Seagate Freeagent 500 GB disk. I am using 100GB for photos and music. Only 38 MB are reported free. How can I reclaim the rest of the space?
I had used in the past as Time machine backup. To create space I moved to trash the file Backups.backupd (as I now have another disk for Time Machine). I can't see this file in the Trash, and I can't see the space in Finder. How do I find / free the space?
The disk format is MAC OS Extended journaled. Disk utility reports no errors. I have run verify and fix, and also erase free space, with no result.
Thank you for your help.

Erase free space only wipes clean the 38 MBs that are already free. Click here to see hidden files.
However, I'd just make a copy of the 100 GBs in use, and then complely wipe the disk.
Don't try to delete the Backups.backupd folder by Finder. It's not a good idea to mix Finder and TM.

How do I install and configure the Java Access Bridge?

I've just installed the Oracle 9i database on this Windows 2000
Pro box with a view to learn what there is to learn about
Oracle. I need to install the Java Access Bridge so that I can
access the Oracle applications. I use a screen reader called
JAWS from Freedom Scientific.
Can anyone please tell me how to install the necessary Access
Bridge components and how to configure things accordingly so
that adaptive software will work correctly with the Oracle
applications.
Adrian

You can do all the networking stuff you need by setting a "bridged" adapter in the VM setup, then configure a valid IP in your guest OS, probably using the same gateway and name servers similar to your host OS.
If you you cannot use a bridged mode adapter because your host network does not support another network card, you can configure a NAT and a host-only adapter in the VM setup as following:
When you configure the network device that corresponds to the NAT device on the on the guest side, set it up to obtain the IP address via DHCP. The NAT device is for outgoing connections to the internet only. VBox will not provide any routing from the outside network to interface behind a NAT device, only via it's own internal DHCP routing.
The host-only adapter is only good for connection between the host and the VM guest. It is primarily designed to provide DHCP like the NAT interface, but does allow a manual configuration, by customizing the "vboxnet0" configuration in the Vbox Network preferences. By default, the IP address range 192.168.56.1 to 192.168.56.100 can be used for manual IP configurations.
It was not mentioned in your requirements, but you need a bridged mode adapter if you want to connect to your guest VM from any other machine beside your host system, e.g. local LAN.

Hi, first time on help! how do I find and download the latest version of itunes on my iphone 4. just tried to sync with itunes and error stated I need newest version!!!

Hi, can anybody help!
Just tried to sync my iphone in itunes and received an error(need the latest version of itunes)
I have tried to download this but no joy. I need 11.1.4
Can anybody tell me whare to find and download this on my phone.

It is telling you that you need to install the latest version of itunes on your computer, not your iphone
Itunes is bult into the iphones operating system. You do not download itunes at all on your iphone.

How do I find and configure the new 'global network proxy' feature in iOS 6?

Similar Messages

Maybe you are looking for