How do I find code for living room apple tv?

how do I find the code for my living room apple tv?

What sort of code are you looking for please.

Similar Messages

How do i find code for airplay apple tv

how do i get a code for airplay for apple tv

I am having this same issue also and I have read all the materials. Yesterday my AirPlay icon disappeared from my menu. After reading through everything on the subject, I discovered that I could not obtain the most recent iTunes update because I didn't have Yosemite, so I updated to Yosemite today. The icon has come back to the menu (although I cannot see the icon on ITunes anyplace). Both the Apple TV and my computer are on the same wifi internet and they worked fine before.
When I try to turn on the Apple TV in the AirPlay Display box, I immediately receive a box titled "AirPlay Device Password" with an instruction "Enter the AirPlay code for 'Apple TV'". I never received this notice before when using Apple TV and my computer with AirPlay. I followed the instructions in the advice given in the community postings of this conversation. I cannot even open the code to enter one--it does not behave like the instructions indicate. I tried inputting a password in the password input at the Apple TV security to see if this would work. This listed as incorrect code when input into the pop up box. In Apple TV Security I have none checked off and nothing will come up when I hit the Code line and nothing is in the password link now.
But still the same box appears whenever I click on Apple TV, either in the icon on the menu bar or the display choice in System Preferences. When the code link is chosen on the Apple TV security, the explanation box to the left mentions that IOS users have to input the user code from their device, but nothing is mentioned about a computer. It is also confusing because the Apple TV security menu has a code and a password and the pop up box for the code uses "password" in the title and "code" in the instruction line and the input box. All the same, there is nothing in the code or the password links of the Apple TV Security.

MSS - where find code for java iviews and how to copy and extract??????

Hi All,
Not sure if this is the correct forum, so if i'm in the wrong place apologies and if possible could you point me in the right direction. If I am in the right place, here it goes......
we're using R/3 4.7, MSS 6.1.20. We're just beginning to implement MSS. I'm wondering if anyone could give me a couple of examples of which MSS options are based on java iviews, where is the code for these java ivews stored on the system and do i have to do anything special to extract this code.
the reason i want the code is that i want to copy it and see how difficult it is to make changes to the code in netweaver developer studio.
Also, as i'm new to all this, if anyone knows of a good source of info for java iview creation/manipulation, please let me know.
Kind regards,
Liz.

Hi,
This is how we access java code for ESS applications. I hope it is the same for MSS as well.
Open your NWDS -> Window -> Preferences -> Java Development Infrastructure -> Development Configurations.
Provide the Landscape directory server in URL field. something like http://<server name>:<port number>. Ping and confirm the connections. Save the settings.
Now select Window -> Open Perspective -> Development Configurations.
Right click on the Offline and select Import configurations. Select remote option and import the respective items from the server. Create a project for the required inactive DC and you will be able to edit the code in webdynpro perspective.
Hope this helps.
Thanks,
Preetham

I have an older I Mac operating system 10.6.8 and want to upgrade. I've been told that the only upgrade available for my machine is 10.7.5. On what website can I find this upgrade or how do I find this upgrade on the Apple website?

I have an older I Mac operating system 10.6.8 and want to upgrade. I've been told that the only upgrade available for my machine is 10.7.5. On what website can I find this upgrade or how do I find this upgrade on the Apple website?

Choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(116475)

How to print claim code for envy 5530 without connecting to internet?

how to print claim code for hp envy 5530 without connecting to internet. We do not have wireless internet and we are trying to set up the eprint app for our samsun android phones and ipad. We need to print off the claim code from the printer but it seems we need to have internet for that. is there any way around that?
Thanks

Hi,
You have to, without connecting to the internet, the claim code (if you can get one) is useless.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

How i can find flag for edit/display in CO01?

hi,
how i can find flag for create/add in CO01 ?
please note that we don't want to use the sy-tcode for checking.
please revert back if you have any clue.
thanks,
sanjay

Thanks for that reply.
To get TRTYP we need to pass the TCODE which we don't want.We wanted to avoid using TCODE since our code gets executed from several TCODEs and during the process for few TCODEs it actually looses the actual TCODE..
So the alternate solution is a check on the if AUFK-AENAM is INITIAL....this field will be empty only at the first instance(when the prod order gets created) and later you can't find this empty in the whole life cycle of this prod order as this will be filled by the value "Last Changed by"..
Hence this covers our requirement.

How can I find ringtones for sale in iTunes? I don't see it as a category anywhere.

how can I find ringtones for sale in iTunes? I don't see it as a category anywhere.

Ferretbite wrote:
You could also download the Ringtone Maker all for iPhone in the AppStore and create your own custom ringtones and message tones.
Not needed.
Easy enough to do in iTunes.
Find the song you want and note the start/stop time you want the ring tone.
Right click - get info, click the Options tab and set the start/stop times as above.
Right click - Create AAC version. This creates a new file.
Drag this new file from the iTunes window to the desktop.
Delete the file from iTunes and also select Delete from hard drive.
On the desktop, rename the file whateveryouwant.m4r (first part you can change to whatever you want & change the extension to .m4r).
Drag the file back to the iTunes library at top left.
Make sure iTunes prefs > General has Tones ticked.

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
Procedure to create a TCODE for ZTABLE:
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
Se93 --> then which radio button to be selected
Select the parameter transaction as a radio button.
what is the program nam e to be given
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

TS2771 how do i find games for ipod 1st generation everything says I need upgrade?

How do I find games for ipod touch 1st gen?

You will just have to search for game that interests you and then see the Requirements section to see if it is compatible with the 1G with iOS 3.1.3..
I know no easy way.

How to write a code for open new txt file in swing

hai all,
now i do one project in java.that project's GUI is Swing. But i don't known swing (basic).So how to write a code for open new txt file and "Open window " in menu item on swing.that means when i click the "New" on menu that time open a new txt file. open also like that type.
plz give me that code ! very urgent
Advance Thanks !
RSK

Swing Tutorial:
http://java.sun.com/docs/books/tutorial/uiswing/index.html
Since you don't know the basic of swing read the tutorial, it is for your own good because it is useless if we provide you with a code you don't even understand and how it works.
If you want a menu read the tutorial about using menus and for opening a file read using JFileChooser.
note: don't use the word urgent because it implies that your problem is more important than others.

How do I find games for my IPOD Classic?

How do I find games for my IPOD Classic?

Apple removed the clickwheel games from the iTunes Store about a year ago now, so they are no longer available. Sorry.
B-rock

How to create transactoin code for a predefined variant?

Hi, I have created one variant for a custom report.How to create transaction code for the report with that variant?

When you create the transaction in SE93 select the Program and selection screen(Report transaction) type not
the transaction with variant(Variant transaction)

How can I find services for object for PM Notification

Hi all
How can I find services for object(attached files ) for PM Notification ?
I can see then,for examle ,using transaction Iw22 :System---->Services for object
My requirement are : 1. open attached file of selected notification for display ( if exists one)
2. If user wants to attach file as service of object
what function exists for it ?
Please your help

Hi SD,
I have checked in SUIM and SU24 also. But I didn't find. Could you please tell me any other way to finding out the authorization objects.
Thanks,
bsv.

How can I find details for an API?

hi all,
how can I find details for an API (oe_order_pub.process_order)?
http://etrm.oracle.com/ has no information for API's.
regards

Hi,
Visit following links.
1.4. Order Management APIs
http://oracleappsengineering.blogspot.in/2012/03/oeorderpubprocessorder-api-to-create.html
oe_order_pub.process_order api book order

How do I find code for living room apple tv?

Similar Messages

Maybe you are looking for