How do I find my device name?

I have installed an app that requires the device name of syncing mobile device. I went to settings/About Phone but could not find the "Device Name".

andyshriver,
I want you to be sure of what your device name is. What model phone do you have?
SandyS_VZW
Follow us on Twitter @VZWSupport

Similar Messages

I am using an original iPad that originally belonged to my wife. iTunes and Find My iPad recognize this device as Sally Fanta's iPad. How do I change the device name to John Fanta's iPad

I am using an original iPad that originally belonged to my wife. iTunes and Find My iPad recognize this device as Her iPad. How do I change the device name to My iPad

Look at this link.
Giving your former iPad to a spouse or family member: the quick guide
http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
 Cheers, Tom

How do I find out the name of my wireless chipset/interface?

I'm doing a install of Arch and I need to setup my WLAN.
So the wiki says:
"After finishing the rest of this installation and rebooting, you can connect to the network with wifi-menu interface_name (where interface_name is the interface of your wireless chipset). "
How do I find out the name of my interface?
Last edited by psycho_tea_drinker (2013-07-03 12:36:40)

psycho_tea_drinker wrote:
hokasch wrote:
Check your chipset (lspci), see if the corresponding kernel module got loaded. Look for dmesg errors. Another way to check device names (from the wiki):
$ ls /sys/class/net
How do I check if the kernal module got loaded?
lspci | grep net
> only shows my ethernet controller
lsusb
> does not show it ethier
I forget to mention that it is a USB wifi dongle (Tplink TL-WN722N). And I'm also running within virtualbox - I hope that does not complicate matters?
Probably. You'll need to make sure that VB guest can see your USB ports. You'll need the VB wiki pages for that though.
I don't use it, so can't help, sorry.
Last edited by skanky (2013-07-03 13:12:46)

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

How do I find out the name of an area menu?

I can see a report with a specific t-code in an area menu, how can i find out the name of the area menu, when i need to edit it in se43?

Do a where used list for the tcode in SE93. select area menu in the list.
Regards
Sridhar

How do I find the image name and media_link for an ubuntu image in the Gallery?

I am trying to create VM using Python API.
I have a custom Linux image:
image_name = 'cloudN-Azure-20150205-os-2015-02-05'
media_link = 'https://portalvhds10ssz63zgvb9g.blob.core.windows.net/vhds/cloudN-Azure-20150205-os-2015-02-05.vhd'
When I used this image to create VM, it failed.
I would like to use the ubuntu 1204 image in the Gallery.
How do I specify the image_name and media_link in my Python code? Basically, where and how do I find the image name and media_link for an image in the Azure image Gallery?
Thanks in advance...

hi sir,
Did you try to use "List OS Image"? we can get the property form the results:
result = sms.list_os_images()
for image in result:
print('Name: ' + image.name)
print('Label: ' + image.label)
print('OS: ' + image.os)
print('Category: ' + image.category)
print('Description: ' + image.description)
print('Location: ' + image.location)
print('Affinity group: ' + image.affinity_group)
print('Media link: ' + image.media_link)
print('')
Please try it. Any questions or it doesn't work, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do i find what device is ordering songs

how do i find what device is ordering songs

In addition to the link Paulcb sent to you, you can find the model of your iPad on the back of the iPad at the bottom in the small print and it will start with an A.
If it doesn't have any camera on the front then it will be and iPad 1.
Regards,
Steve

How do I find the administrator name is 10.7?

how do I find the administrator name is 10.7?

You can use reset password utility to find out the names of the users.
You are not going to rest password here.
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Click inside the box and that should reveal the names.
Stop here. Close windows and quit all apps and restart.
Finder > Macintosh HD > Users
You can find the shortnames there.

How can I find my user name password as I only remember the administrator password for the MacBook?

How can I find my user name password as I only remember my administrator password?I don't want to lose things or content.

If you have only one account, then your admin password is your user password. If you use another account that is not an admin account, then log into your admin account from which you can change the password on your user account.
Forgot Your Account Password
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself
    Reset OS X Password Without an OS X CD — Tech News and Analysis
    How To Create A New Administrator Account - Hack Mac

How could I find the register name?

I'm using Rslinx OPC server according to the Tutorial, and when I follow the 16th step in " Configuring an Allen Bradley PLC in RSLinx ", I find that I can not successful do "type the register name you are trying to get data from or writing to".
So I wonder how can I find the register name needed?
nelly

Hi nelly, which NI software are you using and what application you want to achieve?
Would you please give me more detailed information ,thanks!

How do i find out the name of my out going server?

Trying to set up an email account. It's asking , "what's the name of you out going server?" I don't know the name of my outgoing server. How can I find out the name of my "out going server?" Thanks in advance for any help on my question.

Your provider names their servers. You need to ask them or do a search for email settings for your provider.

Using query ID how we can find query tech name in BW 3.5

Using query ID how we can find query tech name in BW 3.5
I got this querry ID from RSDDSTAT table for one user.
Thanks

SE16 --> RSRREPDIR --> give your id and get the tech name of the query and other info.

How can i find my adminstrator-name and password?

I remember my adminstrator-name and password, but when i write it, it won't let me in and change something. - I know my password 100%, but how can i find my adminstrator-name? PLEASE HELP ME!!!!
I always have been in it all. I knew my password. I still know. It did not ask me about my adminstrator-name before, but now it does. How can i find my adminstator name?
- I know i can reset it all with mac CD, but i don't want to delete all stuff in my mac. What shall i do?

Hold command and s keys when booting the machine
A long line of white type on a black screen appears, when it stops type
ls /Users
and press enter
that's l as in Larry, s as in snake, space, slash Users
a list of users will appear
when done type exit and press enter

HT4061 How do I find the Device IMEI number for an iPad Mini?

How do I find the Device IMEI number on an iPAD Mini? It was not on the packaging or the back of the device.

Settings > General > About

Organization name - How do I find the organization name which SCSM was registered under?

Organization name - How do I find the organization name which SCSM was registered under?
By the way I didnt install SCSM, I am new to this, I just got here and the previous admin didn't have or gave any documentation.
Thanks

You can view the values in the registry. Open regedit and go to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\System Center\2010\Service Manager\Registration
Cheers,
Thomas Strömberg
System Center Specialist
Blog:
Twitter: LinkedIn:
Please remember to 'Propose as answer' if you find a reply helpful

How do I find my device name?

Similar Messages

Maybe you are looking for