How do I find my original setup user account photo?
Hello,
I am new to the Mac world and I have a question that I cannot find anywhere on Google. The other day while setting up my new 13"MBP, it prompted me to take a photo that would serve as my user photo for when I sign in... Today it somehow got changed and now I cannot find that original photo from setup... does anyone know where I can find it?? It is not in my iPhoto or Photo Booth libraries..
Thank you!!!
rerarig wrote:
Im not quite sure where to find HD.... I do not have that option under iDisk under devices in my Finder tab like I have seen on other screenshots...do you think it could be the Lion software?
The Hard Drive should show on your desktop, usually up in the top right hand corner. Double click on it and a window will open.
Who said anything about iDisk?
No, I don't think it's an issue with the Lion software.
Similar Messages
-
How can we find the original XML Name of a Field
Hi All,
Just like the Reports To Field has XML Name as *[<ManagerFullName>]*
Can anyone tell me how I can find the Original XML Name for the "Reports To (Alias)" User field?.
Thanks in advance,
RoystonMy scenario is that,
When a user saves a new campaign I want to change the owner of this campaign to the user he reports to i.e(Manager Alias) Since the Owner field takes the Alias Name.
To achieve this I have created a workflow to assign that Campaign to the Manager.
Here is the Code snippet
The triggering event is : Before modified record is saved.
action is Update Field Owner with UserValue('<ManagerAlias>')
Unfortunately its not accepting the ManagerAlias field....I have tried a similar scenario with the <ManagerFullName> field and its working fine.
Thanks,
-Royston
Edited by: Royston Goveia on May 12, 2009 9:59 PM -
How do I find the original I tunes library that my Ipod is sycned too?
We have been having problems with our computer and when we have got it back I have downloaded the latest version of Itunes. However when I put in my I pod to sync with it tells me that my ipod is already synced with another i tune library and it will only let me transfer the songs I have purchased from Itunes to the new library. Our I pod has all our CDs on it (which we no longer have) so how would I get them to the new library or even better how do I find our original library that we synced the I pod with?
Also last night I purchased 4 tunes from I tunes and they are not transferring to the I pod when it is connected?
HelpHi DonTimo,
I've tried doing that, but in the said folder there are only default pictures. I can't find the images of any contacts in the app "Contacts" anywhere. The thread you refered me to and many others that are smilar to it, date back to about 2009-2010.
Really need this photo. Any other pointers? -
How do I find the number of users returned by a cfldap query?
How do I find the number of users returned by a cfldap query?
I'm not allowed to do something like:
<cfif ArrayLen(results.rows) gt 1>
I then get an error:
faultCode:Server.Processing faultString:'Unable to invoke CFC - Object of type class coldfusion.tagext.net.LdapResultTable cannot be used as an array' faultDetail:''
Many thanks for any light you can shedCheers again Ian for your many helps,
it now won't let me do
<cfqueryparam value="#results.USNCreated#" cfsqltype="cf_sql_varchar">
I get the message:
faultCode:Server.Processing faultString:'Unable to invoke CFC - Error Executing Database Query.' faultDetail:'[Macromedia][SQLServer JDBC Driver][SQLServer]The name "results.USNCreated" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.' -
How can I find out if a user has an active session
How can I find out if a user has an active session or sessionObject in the application Server.
When a user logs on to my web-application, I want him to be able to see a
list of all the other users that are also loged on. To do this I need to get a
list of all the session objects avaliable in the sever at that perticular moment?
In J2EE 2.1 I found the class "javax.servlet.http.HttpSessionContext" with the method "getIds()"
that returned all the session Id's. By using the method getSession(java.lang.String sessionId)
from the same class, you could then retrieve the sessionObject.
But these methods are depricated (and want to be able to use the
latest version of J2EE).
Is there any other way to do this?
I'm using JBoss application server.Check out HttpSessionListener -> http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/http/HttpSessionListener.html
Essentially what you have to do is implement this interface. You also have to register the listener in your web.xml, like this:
<listener>
<listener-class>
package.name.YourListener
</listener-class>
</listener>sessionCreated() will get called each time the app server creates a session and sessionDestroyed() will get called each time the app server invalidates a session. You could have a Map that contains all the active sessions, and a method for printing a list of all of the active sessions. -
How can i find the original picture in the correct event folder from an album folder picture?
how can i find the original picture in the correct event folder from an album folder picture? I can find the link to the original event folder, but is there a way to get right to the picture without having to search visually the event folder?
Depends on whatr you mean
Deleting from your phone does not delete from anywhere else
HOWEVER deleting from your Photo stream does delete from the Photostream so anyone looking at the PS from any device will no longer see the photo
But if your Mac iPhoto is set to automatically impor tphotos form PS or is you have manually imported photos from PS then onc ethey are imported they are on your Mac and change to PS will not affect them
for more on PS see http://support.apple.com/kb/HT4486?viewlocale=en_US&locale=en_US
LN -
How can we find the list of user exits for a transaction
hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadishhi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen -
How can we find all the available user-exits in sap without using SMOD?.
How can we find all the available user-exits in sap without using SMOD?.
Hi,
Please check this links for user exits list.
http://www.planetsap.com/Userexit_List.htm
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/ab038.htm
Regards,
Ferry Lianto -
How do i find the original carrier for my iPhone 3gs
I received an iPhone 3gs as a gift but do not know the country it's coming from. How do I find the original carrier so I can activate and find out if they have an unlock policy.
ThanksProbably only way is to call Applecare in your country and they may tell you who holds the lock. IIRC you IMEI and serial # are required
-
How do I transfer Pages from one user account to another
How do you transfer Pages from one user account to another on the same Mac?
Welcome to the Apple Support Communities
If you haven't modified anything, Pages is installed on /Applications. All users have access to this folder, identified as "Applications" on the Finder sidebar, so you don't have to move anything, because Pages will work on all your users.
If you have installed Pages on ~/Applications (being ~ your user folder), then you have to move Pages to /Applications. After doing this, you will be able to access to Pages on all users -
I'm on an imac running mountain lion. I know it has air drop on it, but it's not showing up in the finder window for my user account. How can I get it to show up on my user account? And yes, I do have administrator rights.
Which os are you using on your computer?
-
How do I delete one of the user accounts on my computer and not lose the data in that account?
How do I delete one of the user accounts on my computer and not lose the data in that account?
I actually have the opposite of this problem. haha.
https://discussions.apple.com/thread/4484354 -
How can i create a new Adminstrator user account ?
How can i create a new Adminstrator user account ?
Go to the System Preferences>Users.
Click the lock if and enter your password, if necessary.
Then click on the "+" symbol below the accounts list.
From the "New Account" menu, select"Administrator" and fill in the rest of the information.
And finally click the "Create Account" button.
Done. A new Administrator user account. -
i have one imac. my wife and i each have our own user accounts and itunes library. How do we share selected music between user accounts?
To give other users read-only access to your library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
If you want to give full read/write access to more than one user, see the support article linked below.
iTunes: How to share music between different accounts on a single computer -
In iPhoto 11, how do I find and get rid of duplicate photos?
in iPhoto 11, how do I find and get rid of doplicate photos?
For dealing with duplicates in iPhoto check out Duplicate Annihilator
Maybe you are looking for
-
Hi, I cant synchronize moves downloaded from the store to my mac with the Ipad anymore after I had to reset the mac. It works for older movies still but not for new ones. I cant watch them on the mac but they just dont synchronize with the ipad. any
-
Hi all, I have a requirement to generate the target fields only based on the value manipulation in source. i.e for example I have a field1 at source with value as "0", then no file has to generated at target, else the file has to be generated. If I n
-
Multiple key presses I'm stuck!!
i want to make a hidden navigation thingy so that if the user types a word, but only the whole word it goes to next marker, i know the keyUp and KeyDown navigation but how do i make it only work when all have been pressed? Thank you
-
Dictation capitalizes every word after a comma, no matter what.
Dictation capitalizes every word after a comma, no matter what. For instance: "I am a man, But not an old man." Any setting to change that could stop this?
-
New Address Book contacts insert leading space into Notes field
When I create a new contact from scratch in Address Book (4.1) the Notes field at the bottom contains leading spaces / tabs. (I can't tell which). This means that information I type in at the bottom looks unusually formatted. This behaviour (I seem t