How do I find my Primary DNS with a wireless router?

My PS3 keeps asking me for my primary DNS, but I can't find it.

It is optional, but as Duane has suggested you can substitute the OpenDNS DNS server IPs for both the primary & secondary DNS servers. So, for example, you can enter: 208.67.222.222 for the primary and 208.67.220.220 for the secondary instead of x.x.x.1 that you are using now.

Similar Messages

  • How do I find the phone # associated with my dryloop account?

    Customer service said they would be open til midnight but they're closed at 11:20. How do I find the phone # associated with my dryloop account so that I can pay online.

        Hi, yogaonmain!
    I'm sorry we were not available to get that information to you. Your mobile telephone number will be listed on your paper statement. It is also typically listed inside your phone under the Settings/Phone info section.
    If you need this information immediately, please call our customer service line at 800-922-0204.
    Thank you,
    AdamE_VZW
    Follow us on Twitter @VZWSupport

  • How can i find my lose iphone with the same apple id i use now

    how can i find my lose iphone with the same apple id i use now

    If you set it up on your iPhone before you lost it then you can sign into your iCloud account on a computer and attempt to locate it.

  • How do i connect my iphone to my wndr3400 wireless router

    I dont know how to connect my iphone to my wndr3400 Netgear wireless router. do i have to add the phone to my homegroup?
    Thanks

    You don't - you sync them via iTunes on your computer, they cannot be directly connected together

  • Will an OS X Version 10.4.11 work with a wireless router?

    Will a OS X Versionb 10.4.11 work with a wireless router?

    blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
    If you do not have an airport card.
    Ethernet BridgeEthernet Bridge  "The versatile Wireless-G Ethernet Bridge can make any wired Ethernet-equipped device a part of your wireless network."  from linksys example: http://www.amazon.com/Linksys-RE1000-Wireless-N-Range-Extender/dp/B005FDXMJS/ref =sr_1_1?ie=UTF8&qid=1314563758&sr=8-1    Setup: http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayou t&pagename=Linksys%2FCommon%2FVisitorWrapper&cid=1134692497433
    USB dongle
    Introducting RokIt, a new wireless USB adapter that is compatible with Mac OS 10.3, 10.4, and 10.5 Leopard. http://rokland.com/store/product_info.php?products_id=319
    Newer Technology MAXPower 802.11g/b Wireless USB 2.0 Stick Adapter $15.99 http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/  Newer Technology MAXPower 802.11n/g/b USB Adapter. The easiest way to add Wireless Connectivity to ANY computer! $29.99 http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/

  • Pls help me.i have a problem with WRT54G wireless router.

    Dear all, Now i got face some problem with WRT54G wireless router.The problem is after i connect to the internet...the wireless will automatic drop..is that any ppl here got face this and got any solution to solve it...?thanks for sharing..

    hi...logon to router's setup page and try changing channel to 11, go to advanced wireless settings, try changing transmission rate to 54Mbps, beacon interval to 50, fragmentation and RTS threshold to 2304, also try upgrading latest firmwar on the router...check whether it maks any difference or not and let me know.

  • I now have internet thru AT&T Uverse with their wireless router.....do I still need to use my Airport Express for my 2 MACS or can I just unplug it?

    I now have internet thru AT&T Uverse with their wireless router.....do I still need to use my Airport Express for my 2 MACS or can I just unplug it?

    You can just unplug the express and use the Uverse wireless or ethernet directly to it.

  • I can't get a signal through whole house because of a brick wall   What range extender do you recommend to be used with my wireless router ( apple brand)

    I can't get a signal through whole house because of a brick wall   What range extender do you recommend to be used with my wireless router ( apple brand)

    Very few 3rd party wireless extenders will work with an Apple router, so your best bet is always to use an extender that is the same brand as the main router. An AirPort Express is a popular choice for this type of application with another Apple router.
    If you had a Cisco router, then a Cisco extender would be your best bet.  Same for Netgear, etc.
    But......a wireless extender can only "extend" the quality of wireless signal that it receives, and not much of a wireless signal is going to make it through a brick wall, so whether any extender might do what you want is open to question.
    You won't know whether an extender using wireless to connect will work to your satisfaction in your home until you actually try it out in your home.
    The performance will always be much better if you can connect the extending device back to the main router using a wired Ethernet cable connection.
    If it is not possible to run the Ethernet cable, a pair of Ethernet power line adapters might be able to send the signal over the existing AC power lines in your home. The theory with these devices is that you already have the wiring in place, you just need the adapters.
    In practice though, things do not always work as well as the theory might suggest, so if you decide to try a pair of adapters, it might be a good idea to understand the store's return policies before you buy.

  • If i have no friend and i want to play other people on gamecenter how do i find someone to play with?

    I just bought an Ipod touch and i downloaded game center.  I have no friends but I want to play with people around the world on NBA Jam and other games how do I get someone to play with me I dont see any buttons.

    Go to Settings>General>Usage. How much space does it show you have?
    If you connect your phone to your computer, what does iTunes say is on your phone? Do you see a large amount of "Other"? If so, you may have a corrupted database. You'll need to sync your phone then restore it as NEW (not from back up) then re-sync your data).

  • How do I use my airport extreme with my FIOS router?

    How do I use my AirPort Extreme base station with my FIOS Router to extend my network?  I have hard disks connected to my AirPort Extreme and would lik to access them.

    Probably can't answer all your questions - but.... I use a Linksys (wired and wireless) router as my primary entry point for FIOS. I use a Time Capsule and an Airport Express as a common wireless connection. So I have two visibile wireless networks and use them both depending on where I am in the house. Both the TC and AEx can be seen either wirelessly or wired from the entire network. Note - the Linksys provides all the DHCP - you set the apple routers as "bridge mode."

  • How do I find out the name of my wireless chipset/interface?

    I'm doing a install of Arch and I need to setup my WLAN.
    So the wiki says:
    "After finishing the rest of this installation and rebooting, you can connect to the network with wifi-menu interface_name (where interface_name is the interface of your wireless chipset). "
    How do I find out the name of my interface?
    Last edited by psycho_tea_drinker (2013-07-03 12:36:40)

    psycho_tea_drinker wrote:
    hokasch wrote:
    Check your chipset (lspci), see if the corresponding kernel module got loaded. Look for dmesg errors. Another way to check device names (from the wiki):
    $ ls /sys/class/net
    How do I check if the kernal module got loaded?
    lspci | grep net
    > only shows my ethernet controller
    lsusb
    > does not show it ethier
    I forget to mention that it is a USB wifi dongle (Tplink TL-WN722N). And I'm also running within virtualbox - I hope that does not complicate matters?
    Probably. You'll need to make sure that VB guest can see your USB ports. You'll need the VB wiki pages for that though.
    I don't use it, so can't help, sorry.
    Last edited by skanky (2013-07-03 13:12:46)

  • How do I find the IP address of a wireless printer (via bonjour) on my Airport Extreme?

    I can see the MAC address of my macbook and the printer using the AirPort Utility, but I can't find the actual IP. Attempting to connect through the printer utility puts:http://hp88388e.local./ in the URL, but the page just hangs. isn't there a numerical address associated with the printer? how can I find it?

    Thanx for the help! It was not the problem, however. I fixed the issue. Here is what happened:
    Because the HP D110 printer was set up manually with the previous UBEE wireless router cable modem, the printer's IP address stayed fixed at 192.168.0.238 even after I performed a "factory reset" through the touch-screen menu. bonjour is apparently able to "see" the printer, and even establish a physical layer of communication with the printer, but it is unable to transfer data to and from the printer. Thus, while the network detected and could establish a link, no tasks could be accomplished (i.e. ink levels, paper out, actual printing, etc). additionally, the link to go to the printer webpage was dead (that was my first clue).
    I tried hooking it up via the USB port on the airport extreme, and it would work perfectly. After I set it up, it automatially printed a test page and I discovered that it was still 192.168.0.238 - even though the airport extreme had it listed in the logs as 10.0.1.3. I figured that was the problem, but I was still unable to log into the printer webpage to reset the IP on the printer side.
    Because I was unable to force the airport extreme to assign the printer to the existing address, I had to keep playing around with the on-screen menu. Evenually I found that inside the wireless menu, there is an option to reset all wireless parameters, and once I did this, I deleted the printer and added it again from the print/fax utility. this time, it worked wirelessly, and the printer web page could be accessed.
    As an aside, the apple interface to the print/scan/fax settings were far smoother, faster, and more intuative than the HP utilities written by HP on windows! Hope this helps anyone who is also stuck.

  • How do I find the key for my time capsule router

    How do I find the key for my time capsule router

    Hello, see if these are of any help...
    http://www.iclarified.com/entry/index.php?enid=4547
    http://manuals.info.apple.com/en/TimeCapsule_SetupGuide.pdf
    If it's the Pre-Shared Key you're looking for, open Airport Utility, under the menu item Base Station, look for Equivalent Network Password.

  • Westell ProLine 6100 DSL modem with generic wireless router

    I am planning to purchase the Starter Verizon high speed internet plan.  It comes with a free Westell ProLine 6100/6110 DSL modem.  The combined modem and wireless router is $55.  I have a wireless router (Linksys and Cisco).  Can I use the Linksys or Cisco wireless router with the Westell ProLine DSL modem, or will I have compatibility problems?  Thanks.

    To use that modem with a router, I point to:
    URL: http://www.dslreports.com/faq/13600
    Location: All DSLR (dslreports.com) FAQs » Verizon Online DSL FAQ » Hardware » How do I use a router with the Westell 6100?
    ^^
    Otherwise, you will...
    #1 NOT be able to go anywhere online because of Double NAT.
    #2 Or if you can go some where online then..
    ..For example: If you want to allow users from the net to connect to your computer, you can't just portforward in your generic wireless router. You must also portforward in the Westell 6100. (Called Double NAT Forwarding)
    Points to: portforward.com -> Other Guides -> Port Forwarding Behind Two Routers?
    ^^
    I will leave this up to you on what you want to do. Good luck.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Where do I find my WPA key for my wireless router??? (WRT150N)

    Ok so I'm trying to setup Xbox live for my Xbox 360. I have the WRT150N wireless router and just got the wireless adapter that plugs into the 360. It said the adapter couldnt pick up the signal then i realized i needed to enter the WPA key from my wireless router. Im only 15 and my dad is on business and im not really tech- savvy. I checked the information on the router and it only gives me the serial number and MAC address. Anyone how I can find out what the WPA key is for the router??

    Type 192.168.1.1 on your browsers address bar. Login. And you'll find your security password under Wireless->Wireless Security.
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

Maybe you are looking for