How do I find my word program
how do I find my word program on this macbook pro
I'm afraid you got ripped off - Microsoft doesn't sell Word as a stand-alone package, just as part of the MS Office bundle. And it's far more than $20 - anywhere from $99-199 usually.
If you need something right away to use as a text editor, you can always use the free TextEdit (in your Applications folder) or download LibreOffice - http://www.libreoffice.org/ - as mentioned above.
Clinton
Similar Messages
-
How can i find the printing program?
hi
i have sap script how can i find the printing program ?
amiami bardogo wrote:
hi
what is the different between the commands 'break' and 'break-point'
thanks,
ami
h2 Breakpoints h2
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
· You do not have to change the program code.
· You can set them even when the program is locked by another programmer.
· You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
For further information on special breakpoints, refer to:
Breakpoints at Statements
Breakpoints at Subroutines
Breakpoints at Function Module Calls
Breakpoints at Methods
Breakpoints at System Exceptions
h2 page break h2
WINDOW TYPES
When defining a layout set window, you must select a window type for the window. You can choose between three types:
Constant windows (CONST)
Variable windows (VAR)
Main windows (MAIN)
CONSTANT WINDOW
A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
VARIABLE WINDOW
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
MAIN WINDOW
Each layout set must have one window of type MAIN. Such a window is called the main window of the layout set. For SAPscript layout sets, the main window has a central meaning:
It controls the page break.
It contains the text body that may cover several pages.
It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the layout set. The SAPscript composer thus avoids reformatting of the text after each page break.
If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
HOW THE COMPOSER WORKS
The composer or layout set processor is the central formatting module for the print output. It prepares the texts for the different output devices by using the allocated styles or layout sets.
Processing a layout set happens in a certain order. You must know some facts concerning the different window types, the setting of subsequent pages, or the dynamic control from within the print program.
Page control in layout sets
Define subsequent page statically
Define subsequent page dynamically
Format a layout set page
PAGE CONTROL IN LAYOUT SETS
SAPscript automatically triggers a page break as soon as the main window of one page is full. To be able to execute the page break, the system must know on which subsequent page to continue outputting the text. You can specify the subsequent page either statically when defining the layout set, or you can set the subsequent page dynamically during layout set output.
If the subsequent page is not specified, SAPscript automatically terminates printing, thereby ignoring any other output statements of the application program.
DEFINE SUBSEQUENT PAGE STATICALLY
You define the subsequent page statically with the layout set maintenance transaction. First, specify the start page in the layout set header. The system automatically calls this page whenever the layout set is started. With this page, or, more correctly, with the page window of this page, the text output starts. For each page, specify the subsequent page in the page definition. After a page break, the system continues text output on the subsequent page defined for the last page. By specifying start page and subsequent pages, you can define a page sequence.
DEFINE SUBSEQUENT PAGE DYNAMICALLY
The page sequence set in the layout set definition can be changed by the application program dynamically at runtime. If you want the layout set to start with a page other than the one defined in the layout set header, specify the desired start page using the parameter STARTPAGE when you call the function module START_FORM. However, this new start page is valid only for the current call of the function module.
If you want to break to a subsequent page other than the one specified in the page definition, use the control statement NEW-PAGE to set the name of the new page.
NEW-PAGE .
NEW-PAGE ends the output on the current page. The new subsequent page is only valid for the current call of the control statement. You can either include the control statement explicitly into the text of a text element or pass it to the layout set output using the function module CONTROL_FORM.
FORMAT LAYOUT SET PAGE
The process of formatting the output is controlled by the text contents in the BODY area of the main window. If the main window is completely filled, or if the control statement NEW-PAGE appears in the main window, the system executes a page break. Only at this point in time the system formats the contents of the windows of the other types and replaces the variables with the current values.
For each other window, the system first outputs the default text element, if it exists. Then it processes and formats the list of the active text elements of this window, which you set using the function module WRITE_FORM with the parameter FUNCTION (SET, APPEND, DELETE). Any text that does not fit into the page window is truncated.
As a consequence to this processing order of the composer, the reservation of space for the TOP and BOTTOM areas must be made beforehand. If the BODY area of the main window already contains text, a new text output to the TOP area does not appear on the current page but on the subsequent page in the TOP area. The same applies for the BOTTOM area. If the BODY area is filled to such an extend that the new BOTTOM text no longer fits into the current main window, this text appears on the subsequent page in the BOTTOM area.
A frequent error in application programs is that for the subsequent page (for example, NEXT) of a layout set no main window is defined. If the formatted text of the previous page did not fit into the corresponding main window , the composer searches the subsequent pages for a main window to output the text remainder. However, if the subsequent page of NEXT is NEXT again, the composer encounters an endless loop.
To be able to create correct page breaks in longer text, you should define a main window on each layout set page.
LAYOUT SET CONTROL
To output SAPscript layout sets, in the print program you must always start the output with OPEN_FORM and end it with CLOSE_FORM. The function module OPEN_FORM initializes the SAPscript composer and opens the specified layout set for subsequent output. The system combines all output for this layout set up to the CLOSE_FORM to one print request. If CLOSE_FORM is missing, nothing will be printed.
To output data in a layout set, you must use the SAPscript function modules WRITE_FORM, WRITE_FORM_LINES, and CONTROL_FORM. You can use these function modules any number of times in any order between opening and closing a layout set.
You cannot use the ABAP/4 statement WRITE to write output to a SAPscript layout set.
Several print requests
Start a layout set again
Switch layout sets
Find layout sets
SEVERAL PRINT REQUESTS
Within one transaction, you can open and close several layout sets using OPEN_FORM and CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control whether the output is stored in the same print request. But also the SAP spool decides, depending on several plausibility checks, whether new output is appended to an existing print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but several layout sets for different customers. To have the output for each customer begin with the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the layout set again. Within one print request, first call the function module END_FORM. It executes the final processing for the current layout set. Then start the layout set again using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
If you use START_FORM and END_FORM, you must not specify a layout set for OPEN_FORM. However, in this case you can use the SAPscript output functions only after opening a layout set with START_FORM. -
How do I find out what program / file is using 100 GB of space on my Hard drive? Once I find the problem how do I delete the specific files to increase GB of space?
Use OmniDiskSweeper
Once you find file, it can be deleted from within OmniDiskSweeper
Allan -
I have an idea for an iPhone app that I believe would be marketable. However, I have no talent towards writing software. How does I find a reputable programer that would be will to develop and split proceeds?
Find an app you like. Contact the developer of that app and see if they are interested.
-
How do I find pass word to my old email address has now I cannot down load any apps because I have changed my email address
That's because apps are DRM protected & tied to the account used to originally obtain them. They cannot be transferred to another iTunes account. You can contact iTunes support, explain the situation, and request they add these apps to the download queue of your new account:
http://www.apple.com/support/itunes/contact.html -
How do you find the word count on MacBook, please?
How do you find the word count on MacBook, please?
If you are trying to find word count in a Microsoft Word 2011 documemt, for instance, open the document and go to the Tools menu, selecting Word Count. In Apple's Pages application, open the document and look at the bottom of the page, near the left it will say "X Words" where X is the number.
Best of luck. -
How do I find out which programs of mine will not work with Mountain Lion?
I recently upgraded to Lion and found that all of my Power PC based applications wouldn't work (much to my surprise, as no one at Apple told me this when I inquired about the upgrade, nor is it listed in the App Store). Had to get a whole new Microsoft Word suite - after the fact.
Now, I just got an email from Intuit saying that if I upgrade to Mountain Lion I will probably have to upgrade to the latest and greatest version of Quickbooks (unless I create a partition, which is waaay too complicated for me). How do I find out what ELSE won't work if I upgrade to Mountain Lion?
Mac OS X (10.5.8)Here's a compatibility guide by a 3rd party. I can't attest to the accuracy.
http://roaringapps.com/apps:table/tags/_a/index_tags/_a -
How do I find duplicate words in a Numbers spreadsheet?
Hello, I've created my first document on Numbers and am trying to figure out how to find duplicate words. Ideally, a list of words that repeat in the document and how many times. Is this possible? Thank you in advance for the advice
It's easy enough to find and count duplicate entries, especially if they are all in a single column, but if you want to count individual words within multi word entries, the problem is more complicated.
Here's an example for the 'simple' case, using a familiar 155 word passage from English literature.
The words in the passage are separated into a single line for each word, and stripped of all punctuation. This may be done in Pages, or in Text edit, or in pretty much any word processing software or text editor. Paste the passage into a WP or text document, then use the application's Find/Replace feature to replace all of the spaces with returns. I would also do a second pass replacing all double returns with single returns, then repeat that until Find/Replace reported replacing zero occurrences.
Punctuation was stripped using Find/Replace
The prepared list was pasted into column A of a Numbers table.
Formulas:
B2: =COUNTIF($A$1:A2,A2)
C2: =IF(AND(B>1,B=COUNTIF($A,A2)),ROW()-1,999999)
Fill both down their respective columns to the end of the table.
The small table is inserted as a Basic table using the Tables button. It contains a Header row, but no Header columns.
Formula:
A2: =IFERROR(OFFSET(Table 1 :: $A$1,SMALL(Table 1 :: $C,ROW()-1),COLUMN()-1),"")
Fill right into B2, then fill both down to the end of the table.
Descriptions of the functions used, along with their syntax and at least one example of their use in a table are available in the Numbers '09 User Guide, which may be downloaded via the Help menu in Numbers.
Regards,
Barry
PS: Regards to the late Mr. Shakespeare, and thank you for providing the text used. -
How do i FIND a word on a webpage in safari 7?
Since updating to ios 7, I can't figure out how to find a word on a webpage in Safari. In the older version, I could click on the Search box and search the webpage on the screen for a word or phrase. Surely this great feature that's been standard on all browsers for years is in the new Safari, and I just can't find it. Please help. TIA!
Click on the url bar and delete the url address. You can then type in what you are searching and it will be labeled "On This Page".
-
Where do I find a word bubble
Shape selection tool (tap U)>Custom Shape tool(tap U)>one of the shape libraries is "Talk Bubbles"
-
I purchaised MPV's Core Numbers '09 101 software online yesterday. The software only shows the toutorial, and I couldn't find the actual spread sheet. I have taken a long time watching the toutorial. Please help me on how I can find the actual spread sheet to work on. Thank you in advance
Visit the developer site for help.
https://www.appomator.com/support/ -
How do I find where a program is in the menu so I can run it?
Hello,
When I go to System Administrator > Concurrent > Program > Define I can lookup programs that I should be able to run. Now I want to actually run the process but I cant find figure out what responsability it is under.
How can I go about finding this?948165 wrote:
Hello,
When I go to System Administrator > Concurrent > Program > Define I can lookup programs that I should be able to run. Now I want to actually run the process but I cant find figure out what responsability it is under.
How can I go about finding this?Please see (WHOCANRUN.SQL - List Responsibilities That Can Run a Given Concurrent Program [ID 134036.1]).
Thanks,
Hussein -
How do I find a word in all my document, return false if it's not in there.
Hi,
I struggle with something that should be easy, and didn't find any answer on this forum.
I have a list of word that I want to search in a 300 pages catalogue in InDesign. I'd like to know how can i:
1) Look for the word
2) Return true if it's in the document
3) Return false if it's not
FYI, the words i'm searching are product code, so if they're not in the catalogue, the product isn't in the catalogue.
Thanks a lot,
OlivierHi Oliver,
Use this,
var doc = app.documents;
app.findTextPreferences = NothingEnum.nothing;
app.changeTextPreferences = NothingEnum.nothing;
app.findTextPreferences.findWhat = "Text";
var foundtext = app.activeDocument.stories.everyItem().paragraphs.everyItem().findText();
for (var i=0;i<foundtext.length;i++){
if (foundtext[i].length != 0){
alert("True");
else{
alert("False")
app.findTextPreferences = NothingEnum.nothing;
app.changeTextPreferences = NothingEnum.nothing; -
How can I find the words which spans across end of line to next line in pdf ?
I am using Acrobat Adobe X Pro version for our form development and maintanence. I am writting a Acrobat JAVA batch script which reads through all the words and execute spell check and reports the mispelled words in a excel sheet. Since I am running this script in batch mode for more than 1000 pdfs - I am getting many words joined together. When I looked in to those pdfs all such words are looking okay because it is appearing in end of right margin and the next word is in the next line. Since there was no space between them it was extracted as a single word. Hence the failure.
I used wordf = this.getPageNthWordQuads(i,j) to get the word begin and end coordinates. when I closely observe the values are creating a rectangle and that doesnt span across lines. I got the coordinates for the regular word and the word which span acoross two lines. both of the coordinates are same.
I think I am screwed - I have 8000 such words and no clue of how to get rid of them from the actual misspelled words.
please help. let me know if any class /method if I call will give me the end of line or do I need to go to next layer to find this split.
the addnot is somehow marking the words using this coordinates - please hellp me understand how this works. Thanks.
// for all pages
for (var i = 0; i < this.numPages; i++ )
// For all the words
pg += 1;
numWords = this.getPageNumWords(i);
for ( j = 0; j < numWords; j++)
//get the spell check
ckWord = spell.checkWord(this.getPageNthWord(i,j))
if ( ckWord != null )
jn=0
ml=0
// if mispelled word found.
wordf = this.getPageNthWordQuads(i,j)
swordf = wordf.toString()
var st = swordf.split(",")
var diffx0 = parseInt(st[0])-8
var diffx1 = parseInt(st[1])-8
var diffx2 = parseInt(st[2])-8
var diffx3 = parseInt(st[3])-8
var diffx4 = parseInt(st[4])-8
var diffx5 = parseInt(st[5])-8
var diffx6 = parseInt(st[6])-8
var diffx7 = parseInt(st[7])-8
if (cWord == csword)
jn = 1
if ( st[1] != st[3] )
ml = 1
//dataLine += "\r\n write "
else
ml=2
dataLine += "\r\n"+this.documentFileName
+ "\t" + this.getPageNthWord(i,j)
+ "\t" + pg
+ "\t" + j
+ "\t" + ml
+ "\t" + jn
+ "\t st[0] " + diffx0 + "\t st[1] " + diffx1 + "\t st[2] " + diffx2 + "\t st[3] " + diffx3
+ "\t st[4] " + diffx4 + "\t st[5] " + diffx5 + "\t st[6] " + diffx6 + "\t st[7] " + diffx7
ck=1If Acrobat is reading each word part as separate words, you have a problem.
The way I approached it in some of my tools was to check if a word ends
with a hyphen, and if so, to check if it's the last on the line. If both
conditions are true, combine with the next word on the next line. This is
not fool proof, of course, as there are documents with columns are other
structural elements that prevent this from working. Better than nothing,
though...
However, it is also possible that Acrobat does see both parts as parts of
the same word. In that case, getPageNthWordQuads() will return multiple
quads arrays. As you know, that method returns an array of quad arrays.
There's usually only one, but in principle there could be more... Something
to check before giving up. -
How can I find a word processor other than TextEdit?
I recently bought a word processing program called AbiWord for my imac. I just bought it cheap from the internet and thought it worth to try since I am writing a document that needs more than TexEdit can do.
Can anyone advice me on this as I'm not willing to buy a Microsoft Word for my imac.
What is the best and cheapest way to get a good word processor for imac OS 10.6.3 Snow Leopard ?
BergljotWell. to upgrade I don´t know as it´s such a time consumer but I´ve now got hold of OpenOffice and this program seems to be ok to do the tasks I´m looking for layout etcetera.
Thanks, Bergljot
Maybe you are looking for
-
Don't buy an iPhone if you use a Windows PC
iPhones are made to work with Mac computers. Your experience will be limited if you have a Windows PC. I want a phone that can stream longer home videos from the phone to the PC to send to family living in other states. The Apple program iPhoto will
-
Hi, I use the LabWindows CVI 9.0 installer to add a hierarchy of files and directories needed by my application to the installation path. Everything work fine unless the installer does not keep the case of the directory. This is a problem since my a
-
In the vi that I am writing I have rise and fall times to post in a very specific pattern. I can initialize an array,and I can replace elements, but in "replace element" I only find that I am given the choice of specifying a single dimensional positi
-
Final Cut Pro Studio 5.1.1 and Final Cut Express HD 3.5
Hi, I have a client with both of these installed on the same machine (running 10.4.6). When they try and launch either application, the splash screen comes up, loading various filters, etc. then they get an error message: "File Error: A file of this
-
Does any one have problems with verizon email ? Mainly with email folders .
I have an ipad2 and can not get any folder besides inbox and trash on my ipad .. It seems to be because I have to use yahoo.verizon server.. I have tried to sync the ipad several times but do not get folders that are on my Dell desktop running Window