How do I find out if my DVD burner is compatable???

I would like to buy iDVD 6 but the description says"Burning DVDs requires an Apple SuperDrive or compatible third-party DVD burner". How do I find out if my DVD burner (OWC Mercury Firewire/USB2 D109 DVD+/-RW) is compatable??? It shows up as a Pioneer in iDVD3 and is not supported. I don't want to buy iLife 06 and find out I cant use it with my burner.

The Pioneer 109 should work. My Pioneer 107D and 108
work fine; and the 108 is recognized as DL.
You should really upgrade to Tiger and 10.4.4 in
particular before installing iLife '06. Several new
features don't install on Panther. Ask my PowerBook.
I forgot to mention that I want to but my videos from my digital camcorder on to DVD. I currently can copy data and photos to DVD, no problem.

Similar Messages

  • After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?   So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

    After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
    So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
    Is it possible to see what iDVD did?

    I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
    The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
    The value of Compressor is that it gives you control over the many parameters that affect size quality.  and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
    Good luck.
    Russ

  • How do I find out the size of a file, trying to make a DVD and told the fil

    Made a slide show project with music and trying to write to dvd. Computer tells me the file is to large and to use a dual sided disk. I cut may slides out but no luck. How do you find out the file size?

    Hi
    And SlideShows has a limit of 99 slides per show.
    I rather assemble mine in iMovie HD 6 where as QuickTimeKirk states
    it only has Time as a limit dep. on encoding method selected and if Single or Double layer DVDs
    Single Layer (for DL double time) - TIME includes menu - keeping it simple gives more to movie.
    (I prefere "Brushed Metal" no audio, no animation.)
    • Professional Quality (movies up to 120 min.) - BEST
    • Best Performances (movies less than 60 min.) - High quality on final DVD
    • High Quality (in iDVD08) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
    Yours Bengt W

  • How can I find out the format of a DVD?

    I have DVDs which are not labelled with the format ... DVD-R. DVD+R etc.
    How can I find out the format?

    Interesting ... but I need a magnifying glass to read some of the icons ... is there some other information where this information is kept in text form?

  • HP DVD Recovery Drive How do I find out where

     HP DVD Recovery Drive How do I find out where
    Product name: HP Pavilion 15 Notebook PC
    Product number: F4U31EA#ACB
    Serial number: [Personal Information Removed]
    Windows 8.1 Enterprise 64-bit 

    You have asked an incomplete question. Please continue the statement.
    You can make one usb recovery flashdrive or recovery disk set. the usb recovery flashdrive is preferred because of the reliability, durability and recovery speed it has when compared to the ecovery disk set. 
    How to create a usb recovery flash drive or recovery disk set
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03481733&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I do not know my apple administrator username and password? How do I find out what it is? I am trying to download IBM Notes and Domino onto my MacBook Pro and I cannot download the software without verifying my apple administrator username/password

    I do not know my apple administrator username and password. How do I find out what it is? I am trying to download IBM Notes and Domino onto my MacBook Pro and I cannot download the software without verifying my apple administrator username and password.

    iOS is only for mobile devices, so:
    Resetting or changing a password:
    For Snow Leopard or earlier:  http://support.apple.com/kb/HT1274
    For Lion or later:  http://support.apple.com/kb/HT6022
    For Mavericks users:
    http://www.macworld.co.uk/how-to/mac-software/how-change-admin-password-mac-3535 328/
    This is also useful:
    http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
    If it's running Mac OS X 10.6.8 or earlier, insert a Mac OS X install DVD, restart with the Option key held down, click on it, and use the Reset Password utility.
    If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
    https://discussions.apple.com/docs/DOC-4101

  • My MacBook Pro is running very slow. How do I find out what is causing this?

    How do I find out why my MacBook Pro is running so slow? Then how do I fix it?

    Suggestions of Things You Can Do To Help A Slow Computer
    If your computer seems to be running slower here are some things you can do:
    Start with visits to:     OS X Maintenance - MacAttorney;
                                      The X Lab: The X-FAQs;
                                      The Safe Mac » Mac Performance Guide;
                                      The Safe Mac » The myth of the dirty Mac;
                                      Mac maintenance Quick Assist.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    Repair the Hard Drive - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
    Suggestions for OS X Maintenance
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
    Troubleshooting Applications
    I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
    If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
        used to manage backups and to restore backups. Time Machine
        requires a backup drive that is at least twice the capacity of the
        drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Referenced software can be found at MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • How can I find out the age of my imac

    How can I find out the age of my computer to see if it will be able to download latest operating system

    Open System Profiler in Utilities folder. Look for the Model ID on the right. Then see the following:
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • How can I find out if I have a Superdrive in my iMac?

    How can I find out if I have a Superdrive for burning DVDs. And if I don't can anyone recommend a good external DVD burner?

    This forum is not intended for iMac posts...
    However,
    Look in AppleSystemProfiler.
    The optical drive is listed in different places depending on your OS, in Panther it will be under ATA BUS
    If you have an iMac G4, you can buy & install the same internal drives that are used in desktop G4's.
    In the UK, the NEC ND-4550A is one inexpensive option. It is better to go with an internal drive, and significantly cheaper than external.
    You can read owner reviews @ xlr8yourmac's Drive Compatibility database. Choose "DVD+R/RW + DVD-R/RW Drives" as Drive Type

  • How do I find out what OS my Macbook Pro is running?

    I have a Macbook pro that I purchased a few years ago.  To my knowledge, I have never upgraded the OS.  However, I'm not sure.  How do I find out what OS I'm running and what I'm eligible to upgrade to?
    Thank you in advance for your help!!

    10.7 or Lion is already out and has been for over a year.
    The one that is coming is 10.8 or Mountion Lion.
    You will need to buy the DVD for 10.6 but not for 10.5.
    After you upgrade to 10.6.8 then you can use the App Store to download and install either 10.7 or 10.8 when it is release later this month.
    This is provided your Mac mets the hardware requirements for them.
    Allan

  • How do I find out what an error code found on running the hardware test, means?

    After running the hardware test on my Mac Pro I got an error code of: 4HDD/11/40000004: SATA (4,0)  --  HOW DO I FIND OUT WHAT THIS MEANS?

    It means your one of your SATA Hard drives is having trouble (or possibly your DVD drive, but not likley).
    Got good backups? Now would be a good time to try to make some if you don't.

  • How do i find out who the carrier is and can i get it unlocked to use in australia?

    Hi there,
    I got a iphone4 from my friend ewho brought it from someone from ebay in the states
    I am unable to use the phone and was told that the phone had been updated to a baseband that can not be unlocked
    and that I need to contact the carrier.
    How do I find out who the carrier is and is there anyway I can get it unlocked to be used in Australia?
    It has a grevey sim in it and well at this point in time its just being used as an ipod.
    Yes I know I should of got one from Australia but i thought it wouldnt be this hard to get it fixed to be able to use here.
    please help........
    thanx
    lana

    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    http://support.apple.com/kb/HT3743

  • How do I find out what applications are running in the background

    I have a 2008 iMac with 2GB memory.  How do I find out what programs are running in the background?  I am going to buy a new iMac before the end of the year to replace this one.  When I looked at Activity Monitor it shows 1.8Gb used but doesn't tell all the programs running.

    open activity monitor [if it doesnt launch click winders>Activity Monitor]. then it'll show all proceses

  • How do I find out how many files I have, as an earlier version of iTunes told you at the bottom of the screen. Can you please help me.

    How do I find out how many files I have, as an earlier version of iTunes told you at the bottom of the screen.
    Can anyone please help me with this so I know how many music files or video files I have in my collection.

    Have a look here...
    http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/

  • How do I find out how much of my hard drive space is used up

    I have a Mac OS X Version 10.7.5. Processor 2.66 GHz Intel Core 2 Duo; Memory 2 GB 1067 MHz DDR3. Computer is running very slow. I cleared downloads and reset Safari, emptied trash, etc. How  can I find out how much space I have left on my hard drive?

    As you appear to have at least OS 10.7 installed, you can simply highlight your hard drive and press the SPACE bar to get this:

Maybe you are looking for

  • Vim keeps freezing and I cannot highlight text with my mouse

    title says it all.  Vim will freeze on me randomly.  I was having X issues earlier but stopped using the nvidia driver and that seemed to fix that, but now Vim freezes.  I'll be in Insert mode and it simply will not accept any of my keystrokes or att

  • Datagrid column header word wrap issue

    Hi All, I'm passing dynamic text to a datagrid column header. The word wrap is true but it's not working. Any ideas how to fix this issue? DataGridColumn headerText="{myVar.text} Total" headerWordWrap="true" Thanks Johnny

  • 1KEK only for AP

    Hi, We are in ECC and not activated new GL and going with Classic PCA. Requriement: Accounts payable side user wants to split the vendor (reconciliation) account based on expenditure items PCA. I know through NEW GL PCA its possible but due to some t

  • Ow to change the color of row in Datagrid view

    How to change the color of row in Datagridview. Eg. Am getting a remote server services by get-service.  I want to change the color of services that are not running. Am using the below function to get the services. Please help me it would be useful f

  • Does mac os x 10.8.2 support java 6?

    Hi   Does mac os x 10.8.2 supports java 6?I want to install java 1.6.0_35 which supports my java application in mac os x 10.7.4 version.My application wont support java 7.Can anyone help me how to install java 1.6.0_35 and uninstallation of java 6 up