How do I find out if my I pod touch is a second generation that supports downloading pictures?

How do I find out if my iPod touch is a second generation that supports downloading pictures?

Go here:
Identifying iPod models

Similar Messages

How do you find out who did not contribute to a particular fund raiser that we all just did?

Using MYsql How do you find out who did not contribute to a particular fund raiser that we all just did. There are many titles to the different charities that is under the othpaytitle of the Otherpay table, I however just want to extract the non-contributors for a particular charity title. Is there anyway to do this? When I do the the syntax below it comes up as an "empty set". The search is done by way of the table Id matching and left joins. Please see below.
SELECT moiid, trim(concat(name.fname,' ' ,name.mname,' ',name.lname)) as Brother, name.moiid as Members_ID, sum(otherpay.othpayamt) as NO_Contribution, quadlt.ltfname as quad
FROM name
LEFT JOIN OTHERPAY ON name.moiid = otherpay.othpaymoiid
LEFT JOIN quadlt ON name.quadlt = quadlt.ltid
WHERE Otherpay.othpaytitle like '%food drive%'
AND otherpay.othpaymoiid IS NULL
AND name.type = 'BOI'
AND name.type <> 'jrboi'
AND name.city = 'SUFFOLK'
GROUP BY brother
ORDER BY name.quadlt, brother

Just guessing based on your query, and assuming the above query works, just insert a "where" condition. I also removed the SUM function. Also, "AND otherpay.othpaymoiid IS NULL" may not be needed.
SELECT moiid, trim(concat(name.fname,' ' ,name.mname,' ',name.lname)) as Brother, name.moiid as Members_ID, otherpay.othpayamt, quadlt.ltfname as quad
FROM name
LEFT JOIN OTHERPAY ON name.moiid = otherpay.othpaymoiid
LEFT JOIN quadlt ON name.quadlt = quadlt.ltid
WHERE Otherpay.othpaytitle like '%food drive%'
AND otherpay.othpaymoiid IS NULL
AND name.type = 'BOI'
AND name.type <> 'jrboi'
AND name.city = 'SUFFOLK'
AND othpayamt=0
ORDER BY name.quadlt, brother

How do I find out what my I pod is worth for trade in

How can I find out what my I Pod Classic is worth as a trade to apple for a new one?

Apple will give you 10% off towards the purchase of a new one.
http://www.apple.com/recycling/ipod-cell-phone/

How do I find out a file in a disk?

can anyone tell me
how to I find out a file in a disk?
Thanks in advance.

That's almost a haiku you wrote there, isn't it?
There's no standard API class/method to do that so you need to write your own: you'll have to pass through directories recursively. The File.list method will help you get file listings from a directory.

.How do I find out what Version (generation) of Ipod touch I have, as I want to know if I can download IOS 5 onto it? It was a gift so I only know the model and serial numbers but not the type

Hi, can anyone help me out with this question?
How can I find out which version of Ipod touch I have. I only have the model and serial numbers as it was a gift, but I would like to download IOS 5 if it is compatible?
Very frustrated Ipod user, any advice would be much appreciated.
Lynda.

I had the same problem because there are so many iPod models. There is a great article in Wikileaks that explains it all and also has pictures. I'm confident this answer your question.

HT1420 how do i find out what computers are authorized?

I have the problem that as I switch to a new iphone, all of a sudden i get the message from itunes that "you have already authorized 5 computers". I have had a couple of laptops that I no longer have access to. How do I find out what machines i have linked and remove machines from that list?

However, it seems that you can check...
Tina16
This helped meRe: can i check/edit authorized computers?? Jul 5, 2012 7:25 AM (in response to koraygoksu)
In order to see which devices are authorized on your account:
Open iTunes
Click Store
Click Account
Click View Account
Enter your password
Look in the second section iTunes in the Cloud
To the far right you'll see Manage Devices
Once it's clicked you will see all of the devices currently authorized in iTunes/on your account
I was going to say, "Hope this helps," but based on the above, I'm pretty sure it did!
Thanks guys..."
https://discussions.apple.com/thread/3107886?start=15&tstart=0
Whoops! Read further and saw this:
varjak paw The old house on the hill
Re: can i check/edit authorized computers?? Jul 5, 2012 9:27 AM (in response to Tina16)
For anyone who may come across this thread, Tina is incorrect. That doesn't show all the systems that are authorized to a given account, only those which are set up for automatic downloads or redownloading, which isn't the same as those that are authorized to an account to play protected content. There is no way to see a list of those systems which are authorized to the account.
Regards."

TS1424 misc charges from itunes? How do I find out what the charges are for?

Misc charges from itunes?How do I find out what charges are for?

View your purchase history:
http://support.apple.com/kb/HT2727
If you are still unsure, contact iTunes support and ask:
http://www.apple.com/support/itunes/contact/

How can I find out what is running in the background and running my batterie down

How can I find out what is running in the background

Hi simpbarby,
Welcome to the Support Communities!
The links below will help you understand what apps are running on your iPhone. You can quit the ones that you aren't using.
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
This link will provides tips to conserving battery life:
Apple - Batteries - iPhone
http://www.apple.com/batteries/iphone.html
Optimize Your Settings
Depending on how they are set, a few features may decrease your iPhone battery life. The tips below apply to an iPhone running iOS 7.0 or later.
Enable Wi-Fi: Having Wi-Fi enabled helps consume less power when doing activities that access data. Go to Settings > Wi-Fi and log in to a Wi-Fi network.
Adjust brightness: Dim the screen or turn on Auto-Brightness to extend battery life. Turning on Auto-Brightness allows the screen to adjust based on lighting conditions.
Fetch new data less frequently: The more frequently email or other data is fetched, the quicker your battery may drain. To fetch data manually: Go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Manually.
Turn off push notifications: Apps with Push Notification alert you of new data, which may impact battery life. To disable, go to Settings > Notifications, choose the app you want to disable, and do the following:
Change Alert Style to None.
Turn Badge App Icon off.
Turn Sounds off.
Note: New data will be received when you open the app.
Minimize use of location services: Apps that actively use location services, such as Maps, may reduce battery life. You can see which applications have recently used location services by going to Settings > Privacy > Location Services.
Use Airplane Mode in low- or no-coverage areas: Your iPhone always tries to maintain a connection with the cellular network, which may use more power in low- or no-coverage areas. Turn on Airplane Mode to increase battery life in these situations.
Viewing Usage StatisticsKnowing and understanding your iPhone usage can help you better manage your battery life. To view your iPhone usage statistics, go to Settings > General > Usage. Under “Time since last full charge”:
Usage: Amount of time iPhone has been awake and in use since the last full charge. iPhone is awake when you’re on a call, using email, listening to music, browsing the web, or sending and receiving text messages, or during certain background tasks such as auto-checking email.
Standby: Amount of time iPhone has been powered on since its last full charge, including the time the phone has been asleep.
I hope this information helps ....
Have a great day!
- Judy

How can we find out the info object in a query ....?

How can we find out the info object in a query is belongs to that particular info cube? If the query is built on a Multiprovider having 4 different info cubes.

Hi,
If you have restrictions at the infoprovider level in the RKF then it is coming from that particular infocube.
Or go to the selection option in the multiprovider...her you can get the mappings of which key figure is populted from which infocube.
For characteristics you will have to look for identification tab in the characteristics option.
Thanks

How do I find out my security question?

How do I find out my security question?

Hi Dave963,
Thanks for visiting Apple Support Communities.
See this article for information and help with Apple ID security questions:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
Best,
Jeremy

How do i find out who the carrier is and can i get it unlocked to use in australia?

Hi there,
I got a iphone4 from my friend ewho brought it from someone from ebay in the states
I am unable to use the phone and was told that the phone had been updated to a baseband that can not be unlocked
and that I need to contact the carrier.
How do I find out who the carrier is and is there anyway I can get it unlocked to be used in Australia?
It has a grevey sim in it and well at this point in time its just being used as an ipod.
Yes I know I should of got one from Australia but i thought it wouldnt be this hard to get it fixed to be able to use here.
please help........
thanx
lana

The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
http://support.apple.com/kb/HT3743

How do I find out what applications are running in the background

I have a 2008 iMac with 2GB memory. How do I find out what programs are running in the background? I am going to buy a new iMac before the end of the year to replace this one. When I looked at Activity Monitor it shows 1.8Gb used but doesn't tell all the programs running.

open activity monitor [if it doesnt launch click winders>Activity Monitor]. then it'll show all proceses

How do I find out how many files I have, as an earlier version of iTunes told you at the bottom of the screen. Can you please help me.

How do I find out how many files I have, as an earlier version of iTunes told you at the bottom of the screen.
Can anyone please help me with this so I know how many music files or video files I have in my collection.

Have a look here...
http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/

How to find out the Transactions used per month & the USER who used that

Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.

You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type          : Report                                 *
*****& Title                 : Z_ABAP_TCODE_MONITOR                   *
*****& Transaction code      : ZTCODE_USAGE                           *
*****& Developer name        : Shailendra Kolakaluri                  *
*****& Deveopment start date : 26 th Dec 2011                         *
*****& Development Package   : ZDEV                                   *
*****& Transport No          : DEVK906086                                       *
*****& Program Description   : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
      fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      layout TYPE slis_layout_alv,
      variant TYPE disvariant,
      events TYPE slis_t_event WITH HEADER LINE,
      heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date   TYPE swncdatum,
user   TYPE swncuname,
mandt     TYPE swncmandt,
tcode     TYPE swnctcode,
report TYPE swncreportname,
count     TYPE swncshcnt,
END OF zusertcode.
*data   : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
      wa_usertcode TYPE swncaggusertcode,
      wa           TYPE zusertcode,
      t_ut         TYPE STANDARD TABLE OF zusertcode,
      wa_result    TYPE zusertcode,
      t_result     TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
    EXPORTING
      component     = 'TOTAL'
      ASSIGNDSYS    = 'DEV'
      periodtype    = 'M'
      periodstrt    = month
    TABLES
      usertcode     = t_usertcode
    EXCEPTIONS
      no_data_found = 1
      OTHERS        = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
    wa-user = wa_usertcode-account.
    IF wa_usertcode-entry_id+72 = 'T'.
      wa-tcode = wa_usertcode-entry_id.
      wa-report = space.
    ELSE.
      wa-tcode = space.
      wa-report = wa_usertcode-entry_id.
    ENDIF.
    COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'DATE'.
fcat-seltext_l   = 'Date'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'MANDT'.
fcat-seltext_l   = 'Client'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'USER'.
fcat-seltext_l   = 'User Name'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'TCODE'.
fcat-seltext_l   = 'Transaction Code'.
fcat-key         = 'X'.
APPEND fcat.
ENDFORM.
*&      Form SET_LAYOUT
      text
--> p1        text
<-- p2        text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM.                    " SET_LAYOUT
*&      Form GET_EVENT
      text
--> p1        text
<-- p2        text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM.                    " GET_EVENT
**&      Form GET_COMMENT
      text
--> p1        text
<-- p2        text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM.                    " GET_COMMENT
**&      Form top_of_page
      text
--> p1        text
<-- p2        text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
   EXPORTING
     it_list_commentary       = heading[]
I_LOGO                   =
I_END_OF_LIST_GRID       =
*ENDFORM.                    " top_of_page
*&      Form DISPLAY_DATA
      text
--> p1        text
<-- p2        text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = sy-cprog
      is_layout          = layout
      it_fieldcat        = fcat[]
      i_save             = 'A'
      is_variant         = variant
      it_events          = events[]
    TABLES
      t_outtab           = t_ut
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " DISPLAY_DATA

How do I find out how much of my hard drive space is used up

I have a Mac OS X Version 10.7.5. Processor 2.66 GHz Intel Core 2 Duo; Memory 2 GB 1067 MHz DDR3. Computer is running very slow. I cleared downloads and reset Safari, emptied trash, etc. How can I find out how much space I have left on my hard drive?

As you appear to have at least OS 10.7 installed, you can simply highlight your hard drive and press the SPACE bar to get this:

How do I find out if my I pod touch is a second generation that supports downloading pictures?

Similar Messages

Maybe you are looking for