How do i find out my sharing partners?

I have 4 out of my 5 sharing slots for iTunes taken, but I only recall using 2. How do I find out my list of sharing partners?

bkengld,
Let's set your voicemail up. There is a voicemail icon under the phone icon. By pressing this button it will ask you if you want a personalized greeting or a general greeting. It will walk you through each step.
RobinD_VZW
Follow us on twitter @VZWSupport

Similar Messages

Shared services and workspace architecture(How we can find out req &respon)

Good morning Hyperion folks,
Does any body have any document or PDF about workspace and shared service architecture...How these both components are communicate each other..any idea or any document..while communicating of these if anything goes wrong,,where we need to check, what is exactly the problem (any suggestible logs)...
Company are doing big mistake by using this hyperion tool ..These guys are not supporting and even they don't know much about the tool apart Product dev team..and that too they are not disclosure any documents related product...
**Does anybody found any kind performance tunning guide or lab guide about workspace and shared service HFM,Planning...** I have never seen component wise documents and tunning guide and recommendations.
I am strong opnion about hyperion is,we would not get any support from oracle and documents so He can migrate Cognos TM1 and Finance management etc........
Edited by: 888154 on 29/09/2011 02:55

Thanks john For ur reply ..i have seen these documents long ago ..i am asking about Shared services and workspace architecture and how these are functioning and where we can find out communication error and slow login issue with workspce and shared services.. How authentication is log on ..is there any machanisam they are using for authencation ...We are using OpenLadp ...
Ex :1.Per suppose log on to workspace that request goes to shared services directory and it will check whether that user is exists or not on Shared services tables ...here what kind of alogirtham using to aunthenticate user...How we can diagonse this process taking to much time,,,is there any specific logs related this (If logs are exsits how we can find out)...
2.Once authencation done successfully and responce send to workspace and populate workspace home page...then i click on application button (FM application) and it's taki ng to much time to load HFM page.To this where we need to look whta excatly problem? what are logs file helpful to us to diagonse..

How Can I Find Out If Someone Is Spying On My Macbook?

How can I find out if someone is spying on my macbook? It's about 5 years old and I think someone is remotely controlling it even though my remote management and screen sharing is always off in the Sharing panel in Systems Preferences. I don't SHARE anything willingly! My screen shakes up and down or sometimes it just falls a few inches and I keep losing my place. This only happens while I am on the internet. The arrow icon for the mouse also behaves erratically at times, as if it is being controlled by someone else. And I have people stalking me who seem to know what I buy on the internet and where I am going when I use google maps, ect.... How do I get rid of remote desktop from a MAC 10.6.8 or trace the idiots doing this to me???
Thanks.

I think it may be more of an issue with the startup disk rather than spyware.
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, start up from your Mac install disc to make repairs.
Instructions here > Mac OS X 10.6: Reinstalling Mac OS X

How can i find out if i have a bad codec affecting after effects?

hi all, i'm having all kinds of problems with after effects cs4. the current problem i'm having is i'll be working on a project, it starts to slow down and become unresponsive, i try to save but then it crashes and everything i've done is lost. opengl is off but i don't think that's the problem because opengl isn't affecting any of my other programs like cinema 4d and i even tried taking out the opengl from the plugins folder but i was still getting opengl error messages with certain effects like the rotoscoping effect. i was wondering if maybe this might be a codec problem since i heard that ae loads codecs at start. how can i find out if a corrupted codec is affecting my after effects?
after effects cs4
amd turion 64 x2 mobile technology tl-62 2.10 ghz
3 gb ram
windows vista 32
geforce go 6150
total graphics memory: 1343 mb
dedicated graphics memory: 128 mb
system video memory: 0 mb
shared system memory: 1215 mb
i'm pretty much desperate to get this working as it's essential to my work flow and i can't afford to get a new computer right now (i should have bought a mac, now i know) so i'll try anything if you have any suggestions. thanks!

>how can i find out if a corrupted codec is affecting my after effects?
You remove them all! ;-) I think you are going about this the wrong way.
a)If you ever installed any third-party CoDecs manually, they will be listed in the "Add or Remove Programs" section or have an uninstaller.
b)If those CoDecs were auto-installed e.g. via a web-browser, they will leave traces in the extension lists or even appear as separate entries somewhere as well.
c) If the CoDecs were part of a program, then by all rights, you really should know which programs those are and know how to remove them.
Failing that, simply uninstall Quicktime completely. Reinstall it from scratch. Likewise, manually download a full install of Windows Media Player and reinstall it using the "Repair" option. Everything else is pure specualtion - AE may scan your CoDecs on startup, but if you never import any footage using them, they will not be initialized and not cause trouble.
And honestly: That Mac talk is not worth a dime. Final Cut Pro alone comes with 30 or so extra CoDecs, many of which have been known to be just as troublesome to use with Adobe products and you can encounter the same situation easily any time...
Mylenium

HT204088 how to I find out the most recent deductions to my account from the app store (say, for a recent download for additional functionality on a iPad game)

How to I find out the most recent deductions to my account from the app store (say, for a recent download for additional functionality on a iPad game). Much as I try, I can't seem to get to see my account in enough detail to see what I have spent downloading apps to the ipad.

You need to punch in the passcode for any purchase right, not just for new apps??
If one of the other students, or anyone else, got access to your iTunes Store account, necessary to make any purchases, then they'd have all the information they'd need to also make in-app purchases. But an in-app purchase can only be made through the account through which the original app was purchased. Either your son bought the game (free or paid) and then shared it with someone else along with the account information (necessary to authorize the app on someone else's device), or someone else downloaded the game as well, not just made in-app purchases.
In any case, changing your iTunes Store password should now have cut off any such unauthorized activity, though of course if your son gives the new password out, you'll be back to square one.
Regards.

TS3376 how can i tell if someone is logging into my find my iphone account and how can i find out who it is?

how can i tell if someone is logging into my find my iphone account and how can i find out who it is? Can I add a second layer of password security for Find My iphone?

Nobody can log in to your iCloud account unless you gave them your password. There is no other way.
If you shared your password with someone (not a good idea) and no longer want them to have access to your account, change the password and don't share it again.

How can I find out how much space left on a hard drive connected to an airport?

When I go into the finder and choose the AirPort, the external drive that's hooked up to the airport shows up just fine, though its icon is a folder, not a "hard drive" icon. But if I try to do "info" on the drive, it says "zero KB on disk." I know this isn't true, since my entire iTunes library is on that disk. How can I find out how much room is left on that hard drive?

You should be able to see both the total capacity and remaining available on the Disks tab within the AirPort Utility.
ref: AirPort Utility > Select the Extreme > Manual Setup > Disks > Disks tab, and then, click on the shared disk volume name.
Although the following is an AirPort Utility screen-shot of a Time Capsule, it should look identical for the AirPort Extreme.

How do I find out what is in new versions? What version to use?

We are currently using Instant Client 10.1.0.3 connecting to a 9.2.0.6 database. There are several newer version of OIC that are available (10.1.0.5 and 10.2.0.2). How do I find out what is in those versions and whether it is advisable to upgrade (upgrading 500 clients worldwide is no small task)?
Are there changes in either of these versions that address the vulnerabilities of CPU July 2006?
Our servers will be upgraded to 10gR2 in the next 6 months, if that is relevant to the question.

I see your problem now.
Unfortunately Oracle does not disclose the bugs that are fixed in the CPUs.
It is certain that the fixes from CPU July 2006 are neither in Instant Client 10.1.0.5 nor in 10.2.0.2, because these came before the CPU.
Actually I was wrong in my previous reply, you can apply patches, and consequently also CPUs, to Instant Client. The description how to do this is well hidden in the C++ Call Interface Programmer's Guide, see http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14294/install.htm#sthref105
Basically you have to install the full client, patch it, and copy the patched shared libraries over the Instant Client libraries.
I guess if you want to do that, you will have to upgrade your Instant Clients to versions for which the CPU was released.
As to the question what is preferrable, 10.1.0.5 or 10.2.0.2, I'd go for 10.2.0.2 in the hope that it has less bugs. There have been voices on this forum saying that '10.2 is broken', but they have never given more detailed information when I asked. Maybe somebody will append to this thread.
Yours,
Laurenz Albe

How do I find out which device answered FaceTime?

How do I find out which device answered FaceTime? I did not answer, but it shows that it was answered by another device. Is there anyway to figure this out?

Well go look at your other devices..
Are you sharing your apple id for facetime with anyone else?

How do i find out who the carrier is and can i get it unlocked to use in australia?

Hi there,
I got a iphone4 from my friend ewho brought it from someone from ebay in the states
I am unable to use the phone and was told that the phone had been updated to a baseband that can not be unlocked
and that I need to contact the carrier.
How do I find out who the carrier is and is there anyway I can get it unlocked to be used in Australia?
It has a grevey sim in it and well at this point in time its just being used as an ipod.
Yes I know I should of got one from Australia but i thought it wouldnt be this hard to get it fixed to be able to use here.
please help........
thanx
lana

The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
http://support.apple.com/kb/HT3743

How do I find out what applications are running in the background

I have a 2008 iMac with 2GB memory. How do I find out what programs are running in the background? I am going to buy a new iMac before the end of the year to replace this one. When I looked at Activity Monitor it shows 1.8Gb used but doesn't tell all the programs running.

open activity monitor [if it doesnt launch click winders>Activity Monitor]. then it'll show all proceses

How do I find out how many files I have, as an earlier version of iTunes told you at the bottom of the screen. Can you please help me.

How do I find out how many files I have, as an earlier version of iTunes told you at the bottom of the screen.
Can anyone please help me with this so I know how many music files or video files I have in my collection.

Have a look here...
http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/

How do I find out how much of my hard drive space is used up

I have a Mac OS X Version 10.7.5. Processor 2.66 GHz Intel Core 2 Duo; Memory 2 GB 1067 MHz DDR3. Computer is running very slow. I cleared downloads and reset Safari, emptied trash, etc. How can I find out how much space I have left on my hard drive?

As you appear to have at least OS 10.7 installed, you can simply highlight your hard drive and press the SPACE bar to get this:

How can we find out data in an editable ALV grid has been changed or not?

Hi Experts,
How can we find out whether a data in an editable ALV grid has been changed or not.
I am using the
FM -> REUSE_ALV_GRID_DISPLAY_LVC
for ALV display.
I have to chekc whther data has been changed or not befor saving. if changed then only i want to
SAVE
. I cannot use the internal table comparison method for this purpose also i am not using OOP ALV.
So kindly sugest me an alternative.
Thanks and Regards,
Shahana

Hi,
Thanks for your answer. I already saw this post.
See this method.
CALL METHOD reuse_alv_grid->check_changed_data
IMPORTING
e_valid = lv_check.
This will update the internal table with the edited values. Then we can go for internal table comparison.
But my scenario will not allow me for itab comparisons.I just want to know the ALV data has been changed or not.
Regards,
Shahana

I want to update my phone, but i purchased many apps and music on the phone. it won't let me authorize my computer so i cannot update. i don't want to deauthorize all my computers. how can i find out which 5 computers i have authorized?

i want to update my phone, but i purchased many apps and music on the phone. it won't let me authorize my computer so i cannot update. i don't want to deauthorize all my computers. how can i find out which 5 computers i have authorized? also how can i update the software?

This is a tedious solution, which is stupid! And some users report an inability to reauthorize a computer after an "en masse” deauthorization. I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge!

How do i find out my sharing partners?

Similar Messages

Maybe you are looking for